[PATCH v2 3/3] arm64: dts: fsl-ls1043a-rdb: use common spi-cs-setup(hold)-delay-ns

[Frank Li <Frank.Li@nxp.com>]

Use SPI common propteries 'spi-cs-setup-delay-ns' and
'spi-cs-hold-delay-ns' instead of private properties 'fsl,spi-cs-sck-delay'
and 'fsl,spi-sck-cs-delay'.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
index 26f8540cb101b..23b9a8b315468 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -104,24 +104,24 @@ flash@0 {
 		compatible = "n25q128a13", "jedec,spi-nor";  /* 16MB */
 		reg = <0>;
 		spi-max-frequency = <1000000>; /* input clock */
-		fsl,spi-cs-sck-delay = <100>;
-		fsl,spi-sck-cs-delay = <100>;
+		spi-cs-setup-delay-ns = <100>;
+		spi-cs-hold-delay-ns = <100>;
 	};
 
 	slic@2 {
 		compatible = "maxim,ds26522";
 		reg = <2>;
 		spi-max-frequency = <2000000>;
-		fsl,spi-cs-sck-delay = <100>;
-		fsl,spi-sck-cs-delay = <50>;
+		spi-cs-setup-delay-ns = <100>;
+		spi-cs-hold-delay-ns = <49>;
 	};
 
 	slic@3 {
 		compatible = "maxim,ds26522";
 		reg = <3>;
 		spi-max-frequency = <2000000>;
-		fsl,spi-cs-sck-delay = <100>;
-		fsl,spi-sck-cs-delay = <50>;
+		spi-cs-setup-delay-ns = <100>;
+		spi-cs-hold-delay-ns = <50>;
 	};
 };
 

-- 
2.34.1