[PATCH] spi: Fix acpi deferred irq probe

[Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>]

When probing spi device take care of deferred probe of ACPI irq gpio
similar like for OF/DT case.

From practical standpoint this fixes issue with vsc-tp driver on
Dell XP 9340 laptop, which try to request interrupt with spi->irq
equal to -EPROBE_DEFER and fail to probe with the following error:

vsc-tp spi-INTC10D0:00: probe with driver vsc-tp failed with error -22

Suggested-by: Hans de Goede <hdegoede@redhat.com>
Fixes: 33ada67da352 ("ACPI / spi: attach GPIO IRQ from ACPI description to SPI device")
Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
---
 drivers/spi/spi.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index c1dad30a4528..0f3e6e2c2474 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -424,6 +424,16 @@ static int spi_probe(struct device *dev)
 			spi->irq = 0;
 	}
 
+	if (has_acpi_companion(dev) && spi->irq < 0) {
+		struct acpi_device *adev = to_acpi_device_node(dev->fwnode);
+
+		spi->irq = acpi_dev_gpio_irq_get(adev, 0);
+		if (spi->irq == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		if (spi->irq < 0)
+			spi->irq = 0;
+	}
+
 	ret = dev_pm_domain_attach(dev, true);
 	if (ret)
 		return ret;
@@ -2869,9 +2879,6 @@ static acpi_status acpi_register_spi_device(struct spi_controller *ctlr,
 	acpi_set_modalias(adev, acpi_device_hid(adev), spi->modalias,
 			  sizeof(spi->modalias));
 
-	if (spi->irq < 0)
-		spi->irq = acpi_dev_gpio_irq_get(adev, 0);
-
 	acpi_device_set_enumerated(adev);
 
 	adev->power.flags.ignore_parent = true;
-- 
2.34.1