Linux SPI subsystem development
 help / color / mirror / Atom feed
From: Philipp Stanner <phasta@kernel.org>
To: Mark Brown <broonie@kernel.org>
Cc: linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org,
	Philipp Stanner <phasta@kernel.org>
Subject: [PATCH 2/2] spi: pci1xxxx: Use non-hybrid PCI devres API
Date: Thu, 17 Apr 2025 10:39:04 +0200	[thread overview]
Message-ID: <20250417083902.23483-4-phasta@kernel.org> (raw)
In-Reply-To: <20250417083902.23483-2-phasta@kernel.org>

pci1xxxx enables its PCI device with pcim_enable_device(). This,
implicitly, switches the function pci_request_regions() into managed
mode, where it becomes a devres function.

The PCI subsystem wants to remove this hybrid nature from its
interfaces. To do so, users of the aforementioned combination of
functions must be ported to non-hybrid functions.

Moreover, since both functions are already managed in this driver, the
call to pci_release_regions() is unnecessary.

Remove the call to pci_release_regions().

Replace the call to sometimes-managed pci_request_regions() with one to
the always-managed pcim_request_all_regions().

Signed-off-by: Philipp Stanner <phasta@kernel.org>
---
 drivers/spi/spi-pci1xxxx.c | 24 ++++++++----------------
 1 file changed, 8 insertions(+), 16 deletions(-)

diff --git a/drivers/spi/spi-pci1xxxx.c b/drivers/spi/spi-pci1xxxx.c
index fc98979eba48..330078b1d50f 100644
--- a/drivers/spi/spi-pci1xxxx.c
+++ b/drivers/spi/spi-pci1xxxx.c
@@ -741,21 +741,19 @@ static int pci1xxxx_spi_probe(struct pci_dev *pdev, const struct pci_device_id *
 			if (ret)
 				return -ENOMEM;
 
-			ret = pci_request_regions(pdev, DRV_NAME);
+			ret = pcim_request_all_regions(pdev, DRV_NAME);
 			if (ret)
 				return -ENOMEM;
 
 			spi_bus->reg_base = pcim_iomap(pdev, 0, pci_resource_len(pdev, 0));
-			if (!spi_bus->reg_base) {
-				ret = -EINVAL;
-				goto error;
-			}
+			if (!spi_bus->reg_base)
+				return -EINVAL;
 
 			ret = pci_alloc_irq_vectors(pdev, hw_inst_cnt, hw_inst_cnt,
 						    PCI_IRQ_ALL_TYPES);
 			if (ret < 0) {
 				dev_err(&pdev->dev, "Error allocating MSI vectors\n");
-				goto error;
+				return ret;
 			}
 
 			init_completion(&spi_sub_ptr->spi_xfer_done);
@@ -773,13 +771,12 @@ static int pci1xxxx_spi_probe(struct pci_dev *pdev, const struct pci_device_id *
 			if (ret < 0) {
 				dev_err(&pdev->dev, "Unable to request irq : %d",
 					spi_sub_ptr->irq);
-				ret = -ENODEV;
-				goto error;
+				return -ENODEV;
 			}
 
 			ret = pci1xxxx_spi_dma_init(spi_bus, spi_sub_ptr->irq);
 			if (ret && ret != -EOPNOTSUPP)
-				goto error;
+				return ret;
 
 			/* This register is only applicable for 1st instance */
 			regval = readl(spi_bus->reg_base + SPI_PCI_CTRL_REG_OFFSET(0));
@@ -808,8 +805,7 @@ static int pci1xxxx_spi_probe(struct pci_dev *pdev, const struct pci_device_id *
 			if (ret < 0) {
 				dev_err(&pdev->dev, "Unable to request irq : %d",
 					spi_sub_ptr->irq);
-				ret = -ENODEV;
-				goto error;
+				return -ENODEV;
 			}
 		}
 
@@ -828,15 +824,11 @@ static int pci1xxxx_spi_probe(struct pci_dev *pdev, const struct pci_device_id *
 		spi_controller_set_devdata(spi_host, spi_sub_ptr);
 		ret = devm_spi_register_controller(dev, spi_host);
 		if (ret)
-			goto error;
+			return ret;
 	}
 	pci_set_drvdata(pdev, spi_bus);
 
 	return 0;
-
-error:
-	pci_release_regions(pdev);
-	return ret;
 }
 
 static void store_restore_config(struct pci1xxxx_spi *spi_ptr,
-- 
2.48.1


  reply	other threads:[~2025-04-17  8:39 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-04-17  8:39 [PATCH 1/2] spi: spi-cavium-thunderx: Use non-hybrid PCI devres API Philipp Stanner
2025-04-17  8:39 ` Philipp Stanner [this message]
2025-04-17 21:16 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250417083902.23483-4-phasta@kernel.org \
    --to=phasta@kernel.org \
    --cc=broonie@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox