[PATCH AUTOSEL 6.1 06/12] spi: tegra210-quad: use WARN_ON_ONCE instead of WARN_ON for timeouts

[PATCH AUTOSEL 6.1 06/12] spi: tegra210-quad: use WARN_ON_ONCE instead of WARN_ON for timeouts

[Sasha Levin]

From: Breno Leitao <leitao@debian.org>

[ Upstream commit 41c721fc093938745d116c3a21326a0ee03bb491 ]

Some machines with tegra_qspi_combined_seq_xfer hardware issues generate
excessive kernel warnings, severely polluting the logs:

    dmesg | grep -i "WARNING:.*tegra_qspi_transfer_one_message" | wc -l
    94451

This patch replaces WARN_ON with WARN_ON_ONCE for timeout conditions to
reduce log spam. The subsequent error message still prints on each
occurrence, providing sufficient information about the failure, while
the stack trace is only needed once for debugging purposes.

Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250401-tegra-v2-1-126c293ec047@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-tegra210-quad.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-tegra210-quad.c b/drivers/spi/spi-tegra210-quad.c
index 5ac5cb885552b..97f3a4d3c31a9 100644
--- a/drivers/spi/spi-tegra210-quad.c
+++ b/drivers/spi/spi-tegra210-quad.c
@@ -1110,7 +1110,7 @@ static int tegra_qspi_combined_seq_xfer(struct tegra_qspi *tqspi,
 					(&tqspi->xfer_completion,
 					QSPI_DMA_TIMEOUT);
 
-			if (WARN_ON(ret == 0)) {
+			if (WARN_ON_ONCE(ret == 0)) {
 				dev_err(tqspi->dev, "QSPI Transfer failed with timeout: %d\n",
 					ret);
 				if (tqspi->is_curr_dma_xfer &&
-- 
2.39.5

[PATCH AUTOSEL 6.1 07/12] spi: tegra210-quad: add rate limiting and simplify timeout error message

[Sasha Levin]

From: Breno Leitao <leitao@debian.org>

[ Upstream commit 21f4314e66ed8d40b2ee24185d1a06a07a512eb1 ]

On malfunctioning hardware, timeout error messages can appear thousands
of times, creating unnecessary system pressure and log bloat. This patch
makes two improvements:

1. Replace dev_err() with dev_err_ratelimited() to prevent log flooding
   when hardware errors persist
2. Remove the redundant timeout value parameter from the error message,
   as 'ret' is always zero in this error path

These changes reduce logging overhead while maintaining necessary error
reporting for debugging purposes.

Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250401-tegra-v2-2-126c293ec047@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-tegra210-quad.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-tegra210-quad.c b/drivers/spi/spi-tegra210-quad.c
index 97f3a4d3c31a9..442d42130ec87 100644
--- a/drivers/spi/spi-tegra210-quad.c
+++ b/drivers/spi/spi-tegra210-quad.c
@@ -1111,8 +1111,8 @@ static int tegra_qspi_combined_seq_xfer(struct tegra_qspi *tqspi,
 					QSPI_DMA_TIMEOUT);
 
 			if (WARN_ON_ONCE(ret == 0)) {
-				dev_err(tqspi->dev, "QSPI Transfer failed with timeout: %d\n",
-					ret);
+				dev_err_ratelimited(tqspi->dev,
+						    "QSPI Transfer failed with timeout\n");
 				if (tqspi->is_curr_dma_xfer &&
 				    (tqspi->cur_direction & DATA_DIR_TX))
 					dmaengine_terminate_all
-- 
2.39.5

[PATCH AUTOSEL 6.1 12/12] spi: spi-imx: Add check for spi_imx_setupxfer()

[Sasha Levin]

From: Tamura Dai <kirinode0@gmail.com>

[ Upstream commit 951a04ab3a2db4029debfa48d380ef834b93207e ]

Add check for the return value of spi_imx_setupxfer().
spi_imx->rx and spi_imx->tx function pointer can be NULL when
spi_imx_setupxfer() return error, and make NULL pointer dereference.

 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
 Call trace:
  0x0
  spi_imx_pio_transfer+0x50/0xd8
  spi_imx_transfer_one+0x18c/0x858
  spi_transfer_one_message+0x43c/0x790
  __spi_pump_transfer_message+0x238/0x5d4
  __spi_sync+0x2b0/0x454
  spi_write_then_read+0x11c/0x200

Signed-off-by: Tamura Dai <kirinode0@gmail.com>
Reviewed-by: Carlos Song <carlos.song@nxp.com>
Link: https://patch.msgid.link/20250417011700.14436-1-kirinode0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-imx.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index df73a2c7120c9..13a6ebef01894 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -1605,10 +1605,13 @@ static int spi_imx_transfer_one(struct spi_controller *controller,
 				struct spi_device *spi,
 				struct spi_transfer *transfer)
 {
+	int ret;
 	struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller);
 	unsigned long hz_per_byte, byte_limit;
 
-	spi_imx_setupxfer(spi, transfer);
+	ret = spi_imx_setupxfer(spi, transfer);
+	if (ret < 0)
+		return ret;
 	transfer->effective_speed_hz = spi_imx->spi_bus_clk;
 
 	/* flush rxfifo before transfer */
-- 
2.39.5