linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Haibo Chen <haibo.chen@nxp.com>
To: Haibo Chen <haibo.chen@nxp.com>, Han Xu <han.xu@nxp.com>,
	 Yogesh Gaur <yogeshgaur.83@gmail.com>,
	Mark Brown <broonie@kernel.org>
Cc: linux-spi@vger.kernel.org, imx@lists.linux.dev,
	 linux-kernel@vger.kernel.org
Subject: [PATCH v1 1/5] spi: spi-nxp-fspi: remove the goto in probe
Date: Wed, 23 Apr 2025 14:11:38 +0800	[thread overview]
Message-ID: <20250423-flexspipatch-v1-1-292e530509d3@nxp.com> (raw)
In-Reply-To: <20250423-flexspipatch-v1-0-292e530509d3@nxp.com>

Remove all the goto in probe to simplify the driver.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
---
 drivers/spi/spi-nxp-fspi.c | 87 ++++++++++++++--------------------------------
 1 file changed, 27 insertions(+), 60 deletions(-)

diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c
index bad6b30bab0ecb90d0aaf603b6de5bc834d19de6..00da184be88a026bf562c9808e18e2335a0959e9 100644
--- a/drivers/spi/spi-nxp-fspi.c
+++ b/drivers/spi/spi-nxp-fspi.c
@@ -1161,10 +1161,10 @@ static int nxp_fspi_probe(struct platform_device *pdev)
 	struct device_node *np = dev->of_node;
 	struct resource *res;
 	struct nxp_fspi *f;
-	int ret;
+	int ret, irq;
 	u32 reg;
 
-	ctlr = spi_alloc_host(&pdev->dev, sizeof(*f));
+	ctlr = devm_spi_alloc_host(&pdev->dev, sizeof(*f));
 	if (!ctlr)
 		return -ENOMEM;
 
@@ -1174,10 +1174,8 @@ static int nxp_fspi_probe(struct platform_device *pdev)
 	f = spi_controller_get_devdata(ctlr);
 	f->dev = dev;
 	f->devtype_data = (struct nxp_fspi_devtype_data *)device_get_match_data(dev);
-	if (!f->devtype_data) {
-		ret = -ENODEV;
-		goto err_put_ctrl;
-	}
+	if (!f->devtype_data)
+		return -ENODEV;
 
 	platform_set_drvdata(pdev, f);
 
@@ -1186,11 +1184,8 @@ static int nxp_fspi_probe(struct platform_device *pdev)
 		f->iobase = devm_platform_ioremap_resource(pdev, 0);
 	else
 		f->iobase = devm_platform_ioremap_resource_byname(pdev, "fspi_base");
-
-	if (IS_ERR(f->iobase)) {
-		ret = PTR_ERR(f->iobase);
-		goto err_put_ctrl;
-	}
+	if (IS_ERR(f->iobase))
+		return PTR_ERR(f->iobase);
 
 	/* find the resources - controller memory mapped space */
 	if (is_acpi_node(dev_fwnode(f->dev)))
@@ -1198,11 +1193,8 @@ static int nxp_fspi_probe(struct platform_device *pdev)
 	else
 		res = platform_get_resource_byname(pdev,
 				IORESOURCE_MEM, "fspi_mmap");
-
-	if (!res) {
-		ret = -ENODEV;
-		goto err_put_ctrl;
-	}
+	if (!res)
+		return -ENODEV;
 
 	/* assign memory mapped starting address and mapped size. */
 	f->memmap_phy = res->start;
@@ -1211,69 +1203,46 @@ static int nxp_fspi_probe(struct platform_device *pdev)
 	/* find the clocks */
 	if (dev_of_node(&pdev->dev)) {
 		f->clk_en = devm_clk_get(dev, "fspi_en");
-		if (IS_ERR(f->clk_en)) {
-			ret = PTR_ERR(f->clk_en);
-			goto err_put_ctrl;
-		}
+		if (IS_ERR(f->clk_en))
+			return PTR_ERR(f->clk_en);
 
 		f->clk = devm_clk_get(dev, "fspi");
-		if (IS_ERR(f->clk)) {
-			ret = PTR_ERR(f->clk);
-			goto err_put_ctrl;
-		}
-
-		ret = nxp_fspi_clk_prep_enable(f);
-		if (ret) {
-			dev_err(dev, "can not enable the clock\n");
-			goto err_put_ctrl;
-		}
+		if (IS_ERR(f->clk))
+			return PTR_ERR(f->clk);
 	}
 
+	/* find the irq */
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return dev_err_probe(dev, irq, "Failed to get irq source");
+
+	ret = nxp_fspi_clk_prep_enable(f);
+	if (ret)
+		return dev_err_probe(dev, ret, "Can't enable the clock\n");
+
 	/* Clear potential interrupts */
 	reg = fspi_readl(f, f->iobase + FSPI_INTR);
 	if (reg)
 		fspi_writel(f, reg, f->iobase + FSPI_INTR);
 
-	/* find the irq */
-	ret = platform_get_irq(pdev, 0);
-	if (ret < 0)
-		goto err_disable_clk;
+	nxp_fspi_default_setup(f);
 
-	ret = devm_request_irq(dev, ret,
+	ret = devm_request_irq(dev, irq,
 			nxp_fspi_irq_handler, 0, pdev->name, f);
 	if (ret) {
-		dev_err(dev, "failed to request irq: %d\n", ret);
-		goto err_disable_clk;
+		nxp_fspi_clk_disable_unprep(f);
+		return dev_err_probe(dev, ret, "Failed to request irq\n");
 	}
 
-	mutex_init(&f->lock);
+	devm_mutex_init(dev, &f->lock);
 
 	ctlr->bus_num = -1;
 	ctlr->num_chipselect = NXP_FSPI_MAX_CHIPSELECT;
 	ctlr->mem_ops = &nxp_fspi_mem_ops;
 	ctlr->mem_caps = &nxp_fspi_mem_caps;
-
-	nxp_fspi_default_setup(f);
-
 	ctlr->dev.of_node = np;
 
-	ret = devm_spi_register_controller(&pdev->dev, ctlr);
-	if (ret)
-		goto err_destroy_mutex;
-
-	return 0;
-
-err_destroy_mutex:
-	mutex_destroy(&f->lock);
-
-err_disable_clk:
-	nxp_fspi_clk_disable_unprep(f);
-
-err_put_ctrl:
-	spi_controller_put(ctlr);
-
-	dev_err(dev, "NXP FSPI probe failed\n");
-	return ret;
+	return devm_spi_register_controller(&pdev->dev, ctlr);
 }
 
 static void nxp_fspi_remove(struct platform_device *pdev)
@@ -1285,8 +1254,6 @@ static void nxp_fspi_remove(struct platform_device *pdev)
 
 	nxp_fspi_clk_disable_unprep(f);
 
-	mutex_destroy(&f->lock);
-
 	if (f->ahb_addr)
 		iounmap(f->ahb_addr);
 }

-- 
2.34.1


  reply	other threads:[~2025-04-23  6:10 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-04-23  6:11 [PATCH 0/5] This patch set did some clean up and add runtime pm support for flexspi driver Haibo Chen
2025-04-23  6:11 ` Haibo Chen [this message]
2025-04-23  6:11 ` [PATCH v1 2/5] spi: spi-nxp-fspi: enable runtime pm for fspi Haibo Chen
2025-04-23  6:11 ` [PATCH v1 3/5] spi: spi-nxp-fspi: use guard(mutex) to simplify the code Haibo Chen
2025-04-23  6:11 ` [PATCH v1 4/5] spi: spi-nxp-fspi: remove the unchecked return value for nxp_fspi_clk_disable_unprep Haibo Chen
2025-04-23  6:11 ` [PATCH v1 5/5] spi: nxp-fspi: use devm instead of remove for driver detach Haibo Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250423-flexspipatch-v1-1-292e530509d3@nxp.com \
    --to=haibo.chen@nxp.com \
    --cc=broonie@kernel.org \
    --cc=han.xu@nxp.com \
    --cc=imx@lists.linux.dev \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=yogeshgaur.83@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).