[PATCH v2 1/9] spi: spi-fsl-lpspi: Fix transmissions when using CONT

[James Clark <james.clark@linaro.org>]

From: Larisa Grigore <larisa.grigore@nxp.com>

Commit 6a130448498c ("spi: lpspi: Fix wrong transmission when don't use
CONT") breaks transmissions when CONT is used. The TDIE interrupt should
not be disabled in all cases. If CONT is used and the TX transfer is not
yet completed yet, but the interrupt handler is called because there are
characters to be received, TDIE is replaced with FCIE. When the transfer
is finally completed, SR_TDF is set but the interrupt handler isn't
called again.

Fixes: 6a130448498c ("spi: lpspi: Fix wrong transmission when don't use CONT")
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
---
 drivers/spi/spi-fsl-lpspi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
index 313e444a34f3..eaa6bade61a6 100644
--- a/drivers/spi/spi-fsl-lpspi.c
+++ b/drivers/spi/spi-fsl-lpspi.c
@@ -3,7 +3,7 @@
 // Freescale i.MX7ULP LPSPI driver
 //
 // Copyright 2016 Freescale Semiconductor, Inc.
-// Copyright 2018 NXP Semiconductors
+// Copyright 2018, 2023, 2025 NXP
 
 #include <linux/clk.h>
 #include <linux/completion.h>
@@ -785,7 +785,7 @@ static irqreturn_t fsl_lpspi_isr(int irq, void *dev_id)
 	if (temp_SR & SR_MBF ||
 	    readl(fsl_lpspi->base + IMX7ULP_FSR) & FSR_TXCOUNT) {
 		writel(SR_FCF, fsl_lpspi->base + IMX7ULP_SR);
-		fsl_lpspi_intctrl(fsl_lpspi, IER_FCIE);
+		fsl_lpspi_intctrl(fsl_lpspi, IER_FCIE | (temp_IER & IER_TDIE));
 		return IRQ_HANDLED;
 	}
 

-- 
2.34.1