From: Tomer Maimon <tmaimon77@gmail.com>
To: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
broonie@kernel.org, avifishman70@gmail.com,
tali.perry1@gmail.com, joel@jms.id.au, venture@google.com,
yuenn@google.com, benjaminfair@google.com,
andrew@codeconstruct.com.au
Cc: openbmc@lists.ozlabs.org, devicetree@vger.kernel.org,
linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org,
Tomer Maimon <tmaimon77@gmail.com>
Subject: [PATCH v1] dt-bindings: spi: Convert nuvoton,npcm-pspi to DT schema
Date: Mon, 10 Nov 2025 10:14:57 +0200 [thread overview]
Message-ID: <20251110081457.1008316-1-tmaimon77@gmail.com> (raw)
Convert the Nuvoton NPCM PSPI binding to DT schema format.
Remove the clock-name property since it is not used.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
---
.../bindings/spi/nuvoton,npcm-pspi.txt | 36 ----------
.../bindings/spi/nuvoton,npcm-pspi.yaml | 65 +++++++++++++++++++
2 files changed, 65 insertions(+), 36 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt
create mode 100644 Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.yaml
diff --git a/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt b/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt
deleted file mode 100644
index a4e72e52af59..000000000000
--- a/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Nuvoton NPCM Peripheral Serial Peripheral Interface(PSPI) controller driver
-
-Nuvoton NPCM7xx SOC support two PSPI channels.
-
-Required properties:
- - compatible : "nuvoton,npcm750-pspi" for Poleg NPCM7XX.
- "nuvoton,npcm845-pspi" for Arbel NPCM8XX.
- - #address-cells : should be 1. see spi-bus.txt
- - #size-cells : should be 0. see spi-bus.txt
- - specifies physical base address and size of the register.
- - interrupts : contain PSPI interrupt.
- - clocks : phandle of PSPI reference clock.
- - clock-names: Should be "clk_apb5".
- - pinctrl-names : a pinctrl state named "default" must be defined.
- - pinctrl-0 : phandle referencing pin configuration of the device.
- - resets : phandle to the reset control for this device.
- - cs-gpios: Specifies the gpio pins to be used for chipselects.
- See: Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Optional properties:
-- clock-frequency : Input clock frequency to the PSPI block in Hz.
- Default is 25000000 Hz.
-
-spi0: spi@f0200000 {
- compatible = "nuvoton,npcm750-pspi";
- reg = <0xf0200000 0x1000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pspi1_pins>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk NPCM7XX_CLK_APB5>;
- clock-names = "clk_apb5";
- resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1>
- cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
-};
diff --git a/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.yaml b/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.yaml
new file mode 100644
index 000000000000..65ad40292408
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/nuvoton,npcm-pspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM Peripheral SPI (PSPI) Controller
+
+maintainers:
+ - Tomer Maimon <tmaimon77@gmail.com>
+
+allOf:
+ - $ref: spi-controller.yaml#
+
+description:
+ Nuvoton NPCM Peripheral Serial Peripheral Interface (PSPI) controller.
+ Nuvoton NPCM7xx SOC supports two PSPI channels.
+
+properties:
+ compatible:
+ enum:
+ - nuvoton,npcm750-pspi # Poleg NPCM7XX
+ - nuvoton,npcm845-pspi # Arbel NPCM8XX
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ description: PSPI reference clock.
+
+ resets:
+ maxItems: 1
+ description: PSPI module reset.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - resets
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/reset/nuvoton,npcm7xx-reset.h>
+ spi0: spi@f0200000 {
+ compatible = "nuvoton,npcm750-pspi";
+ reg = <0xf0200000 0x1000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pspi1_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk NPCM7XX_CLK_APB5>;
+ resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1>;
+ cs-gpios = <&gpio6 11 0x1>;
+ };
+
--
2.34.1
next reply other threads:[~2025-11-10 8:15 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-10 8:14 Tomer Maimon [this message]
2025-11-11 7:56 ` [PATCH v1] dt-bindings: spi: Convert nuvoton,npcm-pspi to DT schema Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251110081457.1008316-1-tmaimon77@gmail.com \
--to=tmaimon77@gmail.com \
--cc=andrew@codeconstruct.com.au \
--cc=avifishman70@gmail.com \
--cc=benjaminfair@google.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
--cc=robh@kernel.org \
--cc=tali.perry1@gmail.com \
--cc=venture@google.com \
--cc=yuenn@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).