[PATCH 2/5] spi-geni-qcom: don't set max clock in setup_fifo_params

[Jonathan Marek <jonathan@marek.ca>]

setup_se_xfer() already sets the correct clock (xfer->speed_hz). Setting
the clock to max_speed_hz here makes the driver change the clock rate
between speed_hz and max_speed_hz for every message (if not equal),
slowing it down significantly.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
 drivers/spi/spi-geni-qcom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c
index ed80f49c7b2f3..c33d79d9afaf8 100644
--- a/drivers/spi/spi-geni-qcom.c
+++ b/drivers/spi/spi-geni-qcom.c
@@ -379,7 +379,7 @@ static int setup_fifo_params(struct spi_device *spi_slv,
 		mas->last_mode = spi_slv->mode;
 	}
 
-	return geni_spi_set_clock_and_bw(mas, spi_slv->max_speed_hz);
+	return 0;
 }
 
 static void
-- 
2.51.0