From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Prajna Rajendra Kumar <prajna.rajendrakumar@microchip.com>,
linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Mark Brown <broonie@kernel.org>
Subject: [PATCH v2 4/6] spi: microchip-core: Utilise temporary variable for struct device
Date: Wed, 26 Nov 2025 08:54:42 +0100 [thread overview]
Message-ID: <20251126075558.2035012-5-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20251126075558.2035012-1-andriy.shevchenko@linux.intel.com>
Add a temporary variable to keep a pointer to struct device.
Utilise it where it makes sense.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/spi/spi-microchip-core-spi.c | 44 +++++++++++++---------------
1 file changed, 21 insertions(+), 23 deletions(-)
diff --git a/drivers/spi/spi-microchip-core-spi.c b/drivers/spi/spi-microchip-core-spi.c
index 8ea382c6fee7..0dca46dcdc2f 100644
--- a/drivers/spi/spi-microchip-core-spi.c
+++ b/drivers/spi/spi-microchip-core-spi.c
@@ -284,6 +284,7 @@ static int mchp_corespi_transfer_one(struct spi_controller *host,
static int mchp_corespi_probe(struct platform_device *pdev)
{
const char *protocol = "motorola";
+ struct device *dev = &pdev->dev;
struct spi_controller *host;
struct mchp_corespi *spi;
struct resource *res;
@@ -291,13 +292,13 @@ static int mchp_corespi_probe(struct platform_device *pdev)
bool assert_ssel;
int ret = 0;
- host = devm_spi_alloc_host(&pdev->dev, sizeof(*spi));
+ host = devm_spi_alloc_host(dev, sizeof(*spi));
if (!host)
return -ENOMEM;
platform_set_drvdata(pdev, host);
- if (of_property_read_u32(pdev->dev.of_node, "num-cs", &num_cs))
+ if (of_property_read_u32(dev->of_node, "num-cs", &num_cs))
num_cs = MCHP_CORESPI_MAX_CS;
/*
@@ -305,12 +306,12 @@ static int mchp_corespi_probe(struct platform_device *pdev)
* CoreSPI can be configured for Motorola, TI or NSC.
* The current driver supports only Motorola mode.
*/
- ret = of_property_read_string(pdev->dev.of_node, "microchip,protocol-configuration",
+ ret = of_property_read_string(dev->of_node, "microchip,protocol-configuration",
&protocol);
if (ret && ret != -EINVAL)
- return dev_err_probe(&pdev->dev, ret, "Error reading protocol-configuration\n");
+ return dev_err_probe(dev, ret, "Error reading protocol-configuration\n");
if (strcmp(protocol, "motorola") != 0)
- return dev_err_probe(&pdev->dev, -EINVAL,
+ return dev_err_probe(dev, -EINVAL,
"CoreSPI: protocol '%s' not supported by this driver\n",
protocol);
@@ -318,11 +319,11 @@ static int mchp_corespi_probe(struct platform_device *pdev)
* Motorola mode (0-3): CFG_MOT_MODE
* Mode is fixed in the IP configurator.
*/
- ret = of_property_read_u32(pdev->dev.of_node, "microchip,motorola-mode", &mode);
+ ret = of_property_read_u32(dev->of_node, "microchip,motorola-mode", &mode);
if (ret)
mode = MCHP_CORESPI_DEFAULT_MOTOROLA_MODE;
else if (mode > 3)
- return dev_err_probe(&pdev->dev, -EINVAL,
+ return dev_err_probe(dev, -EINVAL,
"invalid 'microchip,motorola-mode' value %u\n", mode);
/*
@@ -330,9 +331,9 @@ static int mchp_corespi_probe(struct platform_device *pdev)
* The hardware allows frame sizes <= APB data width.
* However, this driver currently only supports 8-bit frames.
*/
- ret = of_property_read_u32(pdev->dev.of_node, "microchip,frame-size", &frame_size);
+ ret = of_property_read_u32(dev->of_node, "microchip,frame-size", &frame_size);
if (!ret && frame_size != 8)
- return dev_err_probe(&pdev->dev, -EINVAL,
+ return dev_err_probe(dev, -EINVAL,
"CoreSPI: frame size %u not supported by this driver\n",
frame_size);
@@ -342,9 +343,9 @@ static int mchp_corespi_probe(struct platform_device *pdev)
* To prevent CS deassertion when TX FIFO drains, the ssel-active property
* keeps CS asserted for the full SPI transfer.
*/
- assert_ssel = of_property_read_bool(pdev->dev.of_node, "microchip,ssel-active");
+ assert_ssel = of_property_read_bool(dev->of_node, "microchip,ssel-active");
if (!assert_ssel)
- return dev_err_probe(&pdev->dev, -EINVAL,
+ return dev_err_probe(dev, -EINVAL,
"hardware must enable 'microchip,ssel-active' to keep CS asserted for the SPI transfer\n");
spi = spi_controller_get_devdata(host);
@@ -356,9 +357,9 @@ static int mchp_corespi_probe(struct platform_device *pdev)
host->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
host->transfer_one = mchp_corespi_transfer_one;
host->set_cs = mchp_corespi_set_cs;
- host->dev.of_node = pdev->dev.of_node;
+ host->dev.of_node = dev->of_node;
- ret = of_property_read_u32(pdev->dev.of_node, "fifo-depth", &spi->fifo_depth);
+ ret = of_property_read_u32(dev->of_node, "fifo-depth", &spi->fifo_depth);
if (ret)
spi->fifo_depth = MCHP_CORESPI_DEFAULT_FIFO_DEPTH;
@@ -370,24 +371,21 @@ static int mchp_corespi_probe(struct platform_device *pdev)
if (spi->irq < 0)
return spi->irq;
- ret = devm_request_irq(&pdev->dev, spi->irq, mchp_corespi_interrupt,
- IRQF_SHARED, dev_name(&pdev->dev), host);
+ ret = devm_request_irq(dev, spi->irq, mchp_corespi_interrupt, IRQF_SHARED,
+ dev_name(dev), host);
if (ret)
- return dev_err_probe(&pdev->dev, ret,
- "could not request irq\n");
+ return dev_err_probe(dev, ret, "could not request irq\n");
- spi->clk = devm_clk_get_enabled(&pdev->dev, NULL);
+ spi->clk = devm_clk_get_enabled(dev, NULL);
if (IS_ERR(spi->clk))
- return dev_err_probe(&pdev->dev, PTR_ERR(spi->clk),
- "could not get clk\n");
+ return dev_err_probe(dev, PTR_ERR(spi->clk), "could not get clk\n");
mchp_corespi_init(host, spi);
- ret = devm_spi_register_controller(&pdev->dev, host);
+ ret = devm_spi_register_controller(dev, host);
if (ret) {
mchp_corespi_disable(spi);
- return dev_err_probe(&pdev->dev, ret,
- "unable to register host for CoreSPI controller\n");
+ return dev_err_probe(dev, ret, "unable to register host for CoreSPI controller\n");
}
return 0;
--
2.50.1
next prev parent reply other threads:[~2025-11-26 7:56 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-26 7:54 [PATCH v2 0/6] spi: microchip-core: Code improvements Andy Shevchenko
2025-11-26 7:54 ` [PATCH v2 1/6] spi: microchip-core: use min() instead of min_t() Andy Shevchenko
2025-11-26 9:22 ` david laight
2025-11-27 15:55 ` Prajna Rajendra Kumar
2025-11-26 7:54 ` [PATCH v2 2/6] spi: microchip-core: Refactor FIFO read and write handlers Andy Shevchenko
2025-11-26 9:21 ` david laight
2025-11-26 11:17 ` Andy Shevchenko
2025-11-26 12:05 ` Mark Brown
2025-11-26 12:13 ` Andy Shevchenko
2025-11-27 16:08 ` Prajna Rajendra Kumar
2025-11-27 16:49 ` Andy Shevchenko
2025-11-27 16:50 ` Andy Shevchenko
2025-11-27 18:05 ` Conor Dooley
2025-11-27 19:01 ` Andy Shevchenko
2025-11-26 7:54 ` [PATCH v2 3/6] spi: microchip-core: Replace dead code (-ENOMEM error message) Andy Shevchenko
2025-11-27 15:58 ` Prajna Rajendra Kumar
2025-11-26 7:54 ` Andy Shevchenko [this message]
2025-11-27 15:59 ` [PATCH v2 4/6] spi: microchip-core: Utilise temporary variable for struct device Prajna Rajendra Kumar
2025-11-26 7:54 ` [PATCH v2 5/6] spi: microchip-core: Use SPI_MODE_X_MASK Andy Shevchenko
2025-11-27 16:00 ` Prajna Rajendra Kumar
2025-11-26 7:54 ` [PATCH v2 6/6] spi: microchip-core: Remove unneeded PM related macro Andy Shevchenko
2025-11-27 16:01 ` Prajna Rajendra Kumar
2025-11-28 18:01 ` (subset) [PATCH v2 0/6] spi: microchip-core: Code improvements Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251126075558.2035012-5-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=prajna.rajendrakumar@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox