Linux SPI subsystem development
 help / color / mirror / Atom feed
From: Rosen Penev <rosenp@gmail.com>
To: linux-spi@vger.kernel.org
Cc: Mark Brown <broonie@kernel.org>,
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCH] spi: ath79: use devm everywhere in probe
Date: Mon, 27 Jul 2026 13:15:43 -0700	[thread overview]
Message-ID: <20260727201543.18857-1-rosenp@gmail.com> (raw)

Use devm_spi_alloc_host() instead of spi_alloc_host() so that the spi
controller is automatically freed on probe failure or device removal.
This lets us eliminate the err_put_host label and goto error path in
probe, as well as the spi_controller_put() call in remove.

It's also a bit weird as everything in probe is using devm except the
first allocating function. Might fix an ordering issue on teardown.

Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 drivers/spi/spi-ath79.c | 24 +++++++-----------------
 1 file changed, 7 insertions(+), 17 deletions(-)

diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c
index 2f61e5b9943c..1f5d0fb03917 100644
--- a/drivers/spi/spi-ath79.c
+++ b/drivers/spi/spi-ath79.c
@@ -173,7 +173,7 @@ static int ath79_spi_probe(struct platform_device *pdev)
 	unsigned long rate;
 	int ret;
 
-	host = spi_alloc_host(&pdev->dev, sizeof(*sp));
+	host = devm_spi_alloc_host(&pdev->dev, sizeof(*sp));
 	if (host == NULL) {
 		dev_err(&pdev->dev, "failed to allocate spi host\n");
 		return -ENOMEM;
@@ -194,22 +194,16 @@ static int ath79_spi_probe(struct platform_device *pdev)
 	sp->bitbang.flags = SPI_CS_HIGH;
 
 	sp->base = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(sp->base)) {
-		ret = PTR_ERR(sp->base);
-		goto err_put_host;
-	}
+	if (IS_ERR(sp->base))
+		return PTR_ERR(sp->base);
 
 	sp->clk = devm_clk_get_enabled(&pdev->dev, "ahb");
-	if (IS_ERR(sp->clk)) {
-		ret = PTR_ERR(sp->clk);
-		goto err_put_host;
-	}
+	if (IS_ERR(sp->clk))
+		return PTR_ERR(sp->clk);
 
 	rate = DIV_ROUND_UP(clk_get_rate(sp->clk), MHZ);
-	if (!rate) {
-		ret = -EINVAL;
-		goto err_put_host;
-	}
+	if (!rate)
+		return -EINVAL;
 
 	sp->rrw_delay = ATH79_SPI_RRW_DELAY_FACTOR / rate;
 	dev_dbg(&pdev->dev, "register read/write delay is %u nsecs\n",
@@ -224,9 +218,6 @@ static int ath79_spi_probe(struct platform_device *pdev)
 
 err_disable:
 	ath79_spi_disable(sp);
-err_put_host:
-	spi_controller_put(host);
-
 	return ret;
 }
 
@@ -236,7 +227,6 @@ static void ath79_spi_remove(struct platform_device *pdev)
 
 	spi_bitbang_stop(&sp->bitbang);
 	ath79_spi_disable(sp);
-	spi_controller_put(sp->bitbang.ctlr);
 }
 
 static void ath79_spi_shutdown(struct platform_device *pdev)
-- 
2.55.0


                 reply	other threads:[~2026-07-27 20:15 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260727201543.18857-1-rosenp@gmail.com \
    --to=rosenp@gmail.com \
    --cc=broonie@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox