Linux SPI subsystem development
 help / color / mirror / Atom feed
From: Jisheng Zhang <jszhang@kernel.org>
To: Mark Brown <broonie@kernel.org>
Cc: linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] spi: dw: use DW_SPI_INT_MASK instead of hardcoded 0xff
Date: Mon, 17 Aug 2026 23:14:04 +0800	[thread overview]
Message-ID: <20260817151404.28324-3-jszhang@kernel.org> (raw)
In-Reply-To: <20260817151404.28324-1-jszhang@kernel.org>

The Interrupt Mask Register valid bits is bit[5:0] which is well
defined with DW_SPI_INT_MASK, use it instead of the incorrect(but no
harm) and hardcoded 0xff.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
 drivers/spi/spi-dw-core.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c
index 299474507663..75d3f5fd79a3 100644
--- a/drivers/spi/spi-dw-core.c
+++ b/drivers/spi/spi-dw-core.c
@@ -228,7 +228,7 @@ static irqreturn_t dw_spi_transfer_handler(struct dw_spi *dws)
 	 */
 	dw_reader(dws);
 	if (!dws->rx_len) {
-		dw_spi_mask_intr(dws, 0xff);
+		dw_spi_mask_intr(dws, DW_SPI_INT_MASK);
 		spi_finalize_current_transfer(dws->ctlr);
 	} else if (dws->rx_len <= dw_readl(dws, DW_SPI_RXFTLR)) {
 		dw_writel(dws, DW_SPI_RXFTLR, dws->rx_len - 1);
@@ -264,7 +264,7 @@ static irqreturn_t dw_spi_enh_handler(struct dw_spi *dws)
 	if (!dws->tx_len && dws->rx_len) {
 		dw_spi_mask_intr(dws, DW_SPI_INT_TXEI);
 	} else if (!dws->rx_len && !dws->tx_len) {
-		dw_spi_mask_intr(dws, 0xff);
+		dw_spi_mask_intr(dws, DW_SPI_INT_MASK);
 		spi_finalize_current_transfer(dws->ctlr);
 	}
 
@@ -282,12 +282,13 @@ static irqreturn_t dw_spi_irq(int irq, void *dev_id)
 
 	if (!dws->transfer_handler ||
 	    (!ctlr->cur_msg && dws->transfer_handler == dw_spi_transfer_handler)) {
-		dw_spi_mask_intr(dws, 0xff);
+		dw_spi_mask_intr(dws, DW_SPI_INT_MASK);
 		return IRQ_HANDLED;
 	}
+
 	if (dws->transfer_handler == dw_spi_enh_handler &&
 	    !dws->rx_len && !dws->tx_len) {
-		dw_spi_mask_intr(dws, 0xff);
+		dw_spi_mask_intr(dws, DW_SPI_INT_MASK);
 		spi_finalize_current_transfer(ctlr);
 		return IRQ_HANDLED;
 	}
@@ -525,7 +526,7 @@ static int dw_spi_transfer_one(struct spi_controller *ctlr,
 	dws->dma_mapped = spi_xfer_is_dma_mapped(ctlr, spi, transfer);
 
 	/* For poll mode just disable all interrupts */
-	dw_spi_mask_intr(dws, 0xff);
+	dw_spi_mask_intr(dws, DW_SPI_INT_MASK);
 
 	if (dws->dma_mapped) {
 		ret = dws->dma_ops->dma_setup(dws, transfer);
@@ -831,7 +832,7 @@ static int dw_spi_exec_mem_op(struct spi_mem *mem, const struct spi_mem_op *op)
 
 	dw_spi_update_config(dws, mem->spi, &cfg, NULL);
 
-	dw_spi_mask_intr(dws, 0xff);
+	dw_spi_mask_intr(dws, DW_SPI_INT_MASK);
 
 	dw_spi_enable_chip(dws, 1);
 
@@ -999,7 +1000,7 @@ static int dw_spi_exec_enh_mem_op(struct spi_mem *mem, const struct spi_mem_op *
 
 	dw_spi_update_config(dws, mem->spi, &cfg, &enh_cfg);
 
-	dw_spi_mask_intr(dws, 0xff);
+	dw_spi_mask_intr(dws, DW_SPI_INT_MASK);
 	reinit_completion(&ctlr->xfer_completion);
 
 	if (op->addr.nbytes && dws->set_addr_nbyte) {
@@ -1038,7 +1039,7 @@ static int dw_spi_exec_enh_mem_op(struct spi_mem *mem, const struct spi_mem_op *
 	ms = wait_for_completion_timeout(&ctlr->xfer_completion,
 					 msecs_to_jiffies(ms));
 	if (ms == 0) {
-		dw_spi_mask_intr(dws, 0xff);
+		dw_spi_mask_intr(dws, DW_SPI_INT_MASK);
 		synchronize_irq(dws->irq);
 		dws->rx = NULL;
 		dws->tx = NULL;
-- 
2.53.0


      parent reply	other threads:[~2026-08-17 15:33 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-17 15:14 [PATCH 0/2] spi: dw: clean ups from "use threaded interrupt" Jisheng Zhang
2026-08-17 15:14 ` [PATCH 1/2] spi: dw: use DW_SPI_ISR directly Jisheng Zhang
2026-08-17 15:14 ` Jisheng Zhang [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260817151404.28324-3-jszhang@kernel.org \
    --to=jszhang@kernel.org \
    --cc=broonie@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox