Re: [PATCH v2 01/16] dt-bindings: display: convert ilitek,ili9341.txt to dt-schema

["Heiko Stübner" <heiko@sntech.de>]

Hi Conor,

Am Montag, 27. Juni 2022, 21:39:49 CEST schrieb Conor Dooley:
> From: Conor Dooley <conor.dooley@microchip.com>
> 
> A dt-schema binding for the Ilitek ili9341 was created as
> panel/ilitek,ili9341.yaml but the txt binding was ignored in the
> process. Move the remaining items in the txt binding to the yaml one &
> delete it.
> 
> The example in the txt binding has a spi-max-frequency which disagrees
> with the yaml replacement (and its own documentation) so change that to
> conform with the binding. There are no users in tree of the Adafruit
> yx240qv29 to check against.
> 
> Link: https://cdn-learn.adafruit.com/assets/assets/000/046/879/original/SPEC-YX240QV29-T_Rev.A__1_.pdf
> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

in your v1 you already got a [0]
Reviewed-by: Rob Herring <robh@kernel.org>
for this patch

Looking at the diffstat, which didn't change, you should
include such tags in followup revisions, to prevent
reviewers from double efforts.

Heiko


[0] https://lore.kernel.org/r/20220627232054.GA3155668-robh@kernel.org

> ---
>  .../bindings/display/ilitek,ili9341.txt       | 27 -----------
>  .../display/panel/ilitek,ili9341.yaml         | 48 +++++++++++++------
>  2 files changed, 34 insertions(+), 41 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/display/ilitek,ili9341.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9341.txt b/Documentation/devicetree/bindings/display/ilitek,ili9341.txt
> deleted file mode 100644
> index 169b32e4ee4e..000000000000
> --- a/Documentation/devicetree/bindings/display/ilitek,ili9341.txt
> +++ /dev/null
> @@ -1,27 +0,0 @@
> -Ilitek ILI9341 display panels
> -
> -This binding is for display panels using an Ilitek ILI9341 controller in SPI
> -mode.
> -
> -Required properties:
> -- compatible:	"adafruit,yx240qv29", "ilitek,ili9341"
> -- dc-gpios:	D/C pin
> -- reset-gpios:	Reset pin
> -
> -The node for this driver must be a child node of a SPI controller, hence
> -all mandatory properties described in ../spi/spi-bus.txt must be specified.
> -
> -Optional properties:
> -- rotation:	panel rotation in degrees counter clockwise (0,90,180,270)
> -- backlight:	phandle of the backlight device attached to the panel
> -
> -Example:
> -	display@0{
> -		compatible = "adafruit,yx240qv29", "ilitek,ili9341";
> -		reg = <0>;
> -		spi-max-frequency = <32000000>;
> -		dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
> -		reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
> -		rotation = <270>;
> -		backlight = <&backlight>;
> -	};
> diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
> index 6058948a9764..94ca92878434 100644
> --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
> @@ -23,6 +23,7 @@ properties:
>        - enum:
>            # ili9341 240*320 Color on stm32f429-disco board
>            - st,sf-tc240t-9370-t
> +          - adafruit,yx240qv29
>        - const: ilitek,ili9341
>  
>    reg: true
> @@ -47,31 +48,50 @@ properties:
>    vddi-led-supply:
>      description: Voltage supply for the LED driver (1.65 .. 3.3 V)
>  
> -additionalProperties: false
> +unevaluatedProperties: false
>  
>  required:
>    - compatible
>    - reg
>    - dc-gpios
> -  - port
> +
> +if:
> +  properties:
> +    compatible:
> +      contains:
> +        enum:
> +          - st,sf-tc240t-9370-t
> +then:
> +  required:
> +    - port
>  
>  examples:
>    - |+
> +    #include <dt-bindings/gpio/gpio.h>
>      spi {
>          #address-cells = <1>;
>          #size-cells = <0>;
>          panel: display@0 {
> -                 compatible = "st,sf-tc240t-9370-t",
> -                              "ilitek,ili9341";
> -                 reg = <0>;
> -                 spi-3wire;
> -                 spi-max-frequency = <10000000>;
> -                 dc-gpios = <&gpiod 13 0>;
> -                 port {
> -                         panel_in: endpoint {
> -                           remote-endpoint = <&display_out>;
> -                      };
> -                 };
> -             };
> +            compatible = "st,sf-tc240t-9370-t",
> +                         "ilitek,ili9341";
> +            reg = <0>;
> +            spi-3wire;
> +            spi-max-frequency = <10000000>;
> +            dc-gpios = <&gpiod 13 0>;
> +            port {
> +                panel_in: endpoint {
> +                    remote-endpoint = <&display_out>;
> +                };
> +            };
> +        };
> +        display@1{
> +            compatible = "adafruit,yx240qv29", "ilitek,ili9341";
> +            reg = <1>;
> +            spi-max-frequency = <10000000>;
> +            dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
> +            reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
> +            rotation = <270>;
> +            backlight = <&backlight>;
>          };
> +    };
>  ...
>