From: Nicolas Ferre <nicolas.ferre@microchip.com>
To: Alexandre Belloni <alexandre.belloni@bootlin.com>,
Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>,
linux-spi@vger.kernel.org, Mark Brown <broonie@kernel.org>,
Daniel Mack <daniel@zonque.org>,
Robert Jarzmik <robert.jarzmik@free.fr>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] spi: Do not print a message if spi_controller_{suspend,resume}() fails
Date: Wed, 5 Sep 2018 12:10:47 +0200 [thread overview]
Message-ID: <463b7aff-bf38-0caf-cc3f-7d1a621fb36f@microchip.com> (raw)
In-Reply-To: <20180905092831.GN13888@piout.net>
On 05/09/2018 at 11:28, Alexandre Belloni wrote:
> On 05/09/2018 10:51:57+0200, Geert Uytterhoeven wrote:
>> spi_controller_{suspend,resume}() already prints an error message on
>> failure, so there is no need to repeat this in individual drivers.
>>
>> Note: spi_master_{suspend,resume}() is an alias for
>> spi_controller_{suspend,resume}().
>>
>> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
>
>> ---
>> drivers/spi/spi-atmel.c | 10 ++--------
>> drivers/spi/spi-dw.c | 7 +------
>> drivers/spi/spi-fsl-espi.c | 4 +---
>> drivers/spi/spi-pl022.c | 8 ++------
>> drivers/spi/spi-pxa2xx.c | 8 +-------
>> 5 files changed, 7 insertions(+), 30 deletions(-)
>>
>> diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
>> index 3f890d16293411ba..74fddcd3282b4bea 100644
>> --- a/drivers/spi/spi-atmel.c
>> +++ b/drivers/spi/spi-atmel.c
>> @@ -1767,10 +1767,8 @@ static int atmel_spi_suspend(struct device *dev)
>>
>> /* Stop the queue running */
>> ret = spi_master_suspend(master);
>> - if (ret) {
>> - dev_warn(dev, "cannot suspend master\n");
>> + if (ret)
>> return ret;
>> - }
>>
>> if (!pm_runtime_suspended(dev))
>> atmel_spi_runtime_suspend(dev);
>> @@ -1799,11 +1797,7 @@ static int atmel_spi_resume(struct device *dev)
>> }
>>
>> /* Start the queue running */
>> - ret = spi_master_resume(master);
>> - if (ret)
>> - dev_err(dev, "problem starting queue (%d)\n", ret);
>> -
>> - return ret;
>> + return spi_master_resume(master);
>> }
>> #endif
>>
>> diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
>> index ac2eb89ef7a5a061..1736612ee86be7dd 100644
>> --- a/drivers/spi/spi-dw.c
>> +++ b/drivers/spi/spi-dw.c
>> @@ -572,13 +572,8 @@ EXPORT_SYMBOL_GPL(dw_spi_suspend_host);
>>
>> int dw_spi_resume_host(struct dw_spi *dws)
>> {
>> - int ret;
>> -
>> spi_hw_init(&dws->master->dev, dws);
>> - ret = spi_controller_resume(dws->master);
>> - if (ret)
>> - dev_err(&dws->master->dev, "fail to start queue (%d)\n", ret);
>> - return ret;
>> + return spi_controller_resume(dws->master);
>> }
>> EXPORT_SYMBOL_GPL(dw_spi_resume_host);
>>
>> diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c
>> index 1e8ff6256079f134..cf2118dc91f44548 100644
>> --- a/drivers/spi/spi-fsl-espi.c
>> +++ b/drivers/spi/spi-fsl-espi.c
>> @@ -798,10 +798,8 @@ static int of_fsl_espi_suspend(struct device *dev)
>> int ret;
>>
>> ret = spi_master_suspend(master);
>> - if (ret) {
>> - dev_warn(dev, "cannot suspend master\n");
>> + if (ret)
>> return ret;
>> - }
>>
>> return pm_runtime_force_suspend(dev);
>> }
>> diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
>> index 1af8c96b940e203d..5f5f197b153c3ec4 100644
>> --- a/drivers/spi/spi-pl022.c
>> +++ b/drivers/spi/spi-pl022.c
>> @@ -2325,10 +2325,8 @@ static int pl022_suspend(struct device *dev)
>> int ret;
>>
>> ret = spi_master_suspend(pl022->master);
>> - if (ret) {
>> - dev_warn(dev, "cannot suspend master\n");
>> + if (ret)
>> return ret;
>> - }
>>
>> ret = pm_runtime_force_suspend(dev);
>> if (ret) {
>> @@ -2353,9 +2351,7 @@ static int pl022_resume(struct device *dev)
>>
>> /* Start the queue running */
>> ret = spi_master_resume(pl022->master);
>> - if (ret)
>> - dev_err(dev, "problem starting queue (%d)\n", ret);
>> - else
>> + if (!ret)
>> dev_dbg(dev, "resumed\n");
>>
>> return ret;
>> diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
>> index 14f4ea59caff7a23..e3cbc66a7061b42f 100644
>> --- a/drivers/spi/spi-pxa2xx.c
>> +++ b/drivers/spi/spi-pxa2xx.c
>> @@ -1808,13 +1808,7 @@ static int pxa2xx_spi_resume(struct device *dev)
>> lpss_ssp_setup(drv_data);
>>
>> /* Start the queue running */
>> - status = spi_controller_resume(drv_data->master);
>> - if (status != 0) {
>> - dev_err(dev, "problem starting queue (%d)\n", status);
>> - return status;
>> - }
>> -
>> - return 0;
>> + return spi_controller_resume(drv_data->master);
>> }
>> #endif
>>
>> --
>> 2.17.1
>>
>
--
Nicolas Ferre
next prev parent reply other threads:[~2018-09-05 10:10 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-05 8:51 [PATCH] spi: Do not print a message if spi_controller_{suspend, resume}() fails Geert Uytterhoeven
2018-09-05 9:28 ` [PATCH] spi: Do not print a message if spi_controller_{suspend,resume}() fails Alexandre Belloni
2018-09-05 10:10 ` Nicolas Ferre [this message]
2018-09-05 9:37 ` Daniel Mack
2018-09-05 11:46 ` Applied "spi: Do not print a message if spi_controller_{suspend, resume}() fails" to the spi tree Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=463b7aff-bf38-0caf-cc3f-7d1a621fb36f@microchip.com \
--to=nicolas.ferre@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=broonie@kernel.org \
--cc=daniel@zonque.org \
--cc=geert+renesas@glider.be \
--cc=haojian.zhuang@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-spi@vger.kernel.org \
--cc=robert.jarzmik@free.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).