From: Heiner Kallweit <hkallweit1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: "linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: [PATCH 4/4] spi: fsl-espi: remove unused linearization code
Date: Sat, 26 Nov 2016 00:00:28 +0100 [thread overview]
Message-ID: <4ce7fd3d-bdb2-3e28-a362-b4a61a207a89@gmail.com> (raw)
In-Reply-To: <2424ba57-be1a-d32d-0c14-1662c2d02409-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
After introducing direct transfers between hardware and transfer
buffers remove all code which is unused now.
This includes getting rid of the 64k linearization buffer.
Signed-off-by: Heiner Kallweit <hkallweit1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
drivers/spi/spi-fsl-espi.c | 80 ----------------------------------------------
1 file changed, 80 deletions(-)
diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c
index e93892d..cd28329 100644
--- a/drivers/spi/spi-fsl-espi.c
+++ b/drivers/spi/spi-fsl-espi.c
@@ -95,9 +95,6 @@ struct fsl_espi {
struct device *dev;
void __iomem *reg_base;
- const void *tx;
- void *rx;
-
struct list_head *m_transfers;
struct spi_transfer *tx_t;
unsigned int tx_pos;
@@ -107,11 +104,8 @@ struct fsl_espi {
bool rx_done;
bool swab;
- unsigned int rx_len;
- unsigned int tx_len;
unsigned int rxskip;
- u8 *local_buf;
spinlock_t lock;
u32 spibrg; /* SPIBRG input clock */
@@ -156,61 +150,6 @@ static inline void fsl_espi_write_reg8(struct fsl_espi *espi, int offset,
iowrite8(val, espi->reg_base + offset);
}
-static void fsl_espi_memcpy_swab(void *to, const void *from,
- struct spi_message *m,
- struct spi_transfer *t)
-{
- struct fsl_espi *espi = spi_master_get_devdata(m->spi->master);
- unsigned int len = t->len;
-
- if (!espi->swab) {
- memcpy(to, from, len);
- return;
- }
-
- while (len)
- if (len >= 4) {
- *(u32 *)to = swahb32p(from);
- to += 4;
- from += 4;
- len -= 4;
- } else {
- *(u16 *)to = swab16p(from);
- to += 2;
- from += 2;
- len -= 2;
- }
-}
-
-static void fsl_espi_copy_to_buf(struct spi_message *m,
- struct fsl_espi *espi)
-{
- struct spi_transfer *t;
- u8 *buf = espi->local_buf;
-
- list_for_each_entry(t, &m->transfers, transfer_list) {
- if (t->tx_buf)
- fsl_espi_memcpy_swab(buf, t->tx_buf, m, t);
- /* In RXSKIP mode controller shifts out zeros internally */
- else if (!espi->rxskip)
- memset(buf, 0, t->len);
- buf += t->len;
- }
-}
-
-static void fsl_espi_copy_from_buf(struct spi_message *m,
- struct fsl_espi *espi)
-{
- struct spi_transfer *t;
- u8 *buf = espi->local_buf;
-
- list_for_each_entry(t, &m->transfers, transfer_list) {
- if (t->rx_buf)
- fsl_espi_memcpy_swab(t->rx_buf, buf, m, t);
- buf += t->len;
- }
-}
-
static int fsl_espi_check_message(struct spi_message *m)
{
struct fsl_espi *espi = spi_master_get_devdata(m->spi->master);
@@ -421,12 +360,6 @@ static int fsl_espi_bufs(struct spi_device *spi, struct spi_transfer *t)
u32 mask, spcom;
int ret;
- espi->rx_len = t->len;
- espi->tx_len = t->len;
-
- espi->tx = t->tx_buf;
- espi->rx = t->rx_buf;
-
reinit_completion(&espi->done);
/* Set SPCOM[CS] and SPCOM[TRANLEN] field */
@@ -436,10 +369,7 @@ static int fsl_espi_bufs(struct spi_device *spi, struct spi_transfer *t)
/* configure RXSKIP mode */
if (espi->rxskip) {
spcom |= SPCOM_RXSKIP(espi->rxskip);
- espi->tx_len = espi->rxskip;
- espi->rx_len = t->len - espi->rxskip;
rx_len = t->len - espi->rxskip;
- espi->rx = t->rx_buf + espi->rxskip;
if (t->rx_nbits == SPI_NBITS_DUAL)
spcom |= SPCOM_DO;
}
@@ -497,7 +427,6 @@ static int fsl_espi_trans(struct spi_message *m, struct spi_transfer *trans)
if (espi->rxskip)
espi->rx_t = list_next_entry(espi->rx_t, transfer_list);
- fsl_espi_copy_to_buf(m, espi);
fsl_espi_setup_transfer(spi, trans);
ret = fsl_espi_bufs(spi, trans);
@@ -511,7 +440,6 @@ static int fsl_espi_trans(struct spi_message *m, struct spi_transfer *trans)
static int fsl_espi_do_one_msg(struct spi_master *master,
struct spi_message *m)
{
- struct fsl_espi *espi = spi_master_get_devdata(m->spi->master);
unsigned int delay_usecs = 0, rx_nbits = 0;
struct spi_transfer *t, trans = {};
int ret;
@@ -534,8 +462,6 @@ static int fsl_espi_do_one_msg(struct spi_master *master,
trans.speed_hz = t->speed_hz;
trans.bits_per_word = t->bits_per_word;
trans.delay_usecs = delay_usecs;
- trans.tx_buf = espi->local_buf;
- trans.rx_buf = espi->local_buf;
trans.rx_nbits = rx_nbits;
if (trans.len)
@@ -773,12 +699,6 @@ static int fsl_espi_probe(struct device *dev, struct resource *mem,
init_completion(&espi->done);
- espi->local_buf = devm_kmalloc(dev, SPCOM_TRANLEN_MAX, GFP_KERNEL);
- if (!espi->local_buf) {
- ret = -ENOMEM;
- goto err_probe;
- }
-
espi->reg_base = devm_ioremap_resource(dev, mem);
if (IS_ERR(espi->reg_base)) {
ret = PTR_ERR(espi->reg_base);
--
2.10.2
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-11-25 23:00 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <2424ba57-be1a-d32d-0c14-1662c2d02409@gmail.com>
[not found] ` <2424ba57-be1a-d32d-0c14-1662c2d02409-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-11-25 22:58 ` [PATCH 1/4] spi: fsl-espi: determine need for byte swap only once Heiner Kallweit
[not found] ` <bfa9887d-ed21-6d89-7e7b-d65c67571d85-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-11-30 18:08 ` Applied "spi: fsl-espi: determine need for byte swap only once" to the spi tree Mark Brown
2016-11-25 22:59 ` [PATCH 2/4] spi: fsl-espi: eliminate need for linearization when writing to hardware Heiner Kallweit
[not found] ` <fe019347-2d40-7e0a-4ee4-cadaa8930d5f-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-11-30 18:08 ` Applied "spi: fsl-espi: eliminate need for linearization when writing to hardware" to the spi tree Mark Brown
2016-11-25 22:59 ` [PATCH 3/4] spi: fsl-espi: eliminate need for linearization when reading from hardware Heiner Kallweit
[not found] ` <80a5a858-dc54-ea9d-3c6e-34fdedc516d7-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-11-30 18:07 ` Applied "spi: fsl-espi: eliminate need for linearization when reading from hardware" to the spi tree Mark Brown
2016-11-25 23:00 ` Heiner Kallweit [this message]
[not found] ` <4ce7fd3d-bdb2-3e28-a362-b4a61a207a89-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-11-30 18:07 ` Applied "spi: fsl-espi: remove unused linearization code" " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4ce7fd3d-bdb2-3e28-a362-b4a61a207a89@gmail.com \
--to=hkallweit1-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).