From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sekhar Nori Subject: Re: [RFC PATCH v3 08/16] ARM: dts: add AM33XX EDMA support Date: Sun, 28 Oct 2012 16:46:36 +0530 Message-ID: <508D1414.2000506@ti.com> References: <1350566815-409-1-git-send-email-mporter@ti.com> <1350566815-409-9-git-send-email-mporter@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Cc: Linux DaVinci Kernel List , Linux OMAP List , Russell King , Linux Documentation List , Devicetree Discuss , Mark Brown , Linux MMC List , Linux Kernel Mailing List , Rob Herring , Vinod Koul , Dan Williams , Linux SPI Devel List , Chris Ball , Linux ARM Kernel List To: Matt Porter Return-path: In-Reply-To: <1350566815-409-9-git-send-email-mporter-l0cyMroinI0@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: devicetree-discuss-bounces+gldd-devicetree-discuss=m.gmane.org-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org Sender: "devicetree-discuss" List-Id: linux-spi.vger.kernel.org On 10/18/2012 6:56 PM, Matt Porter wrote: > Adds AM33XX EDMA support to the am33xx.dtsi as documented in > Documentation/devicetree/bindings/dma/ti-edma.txt > > Signed-off-by: Matt Porter > --- > arch/arm/boot/dts/am33xx.dtsi | 31 +++++++++++++++++++++++++++++++ > 1 file changed, 31 insertions(+) > > diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi > index bb31bff..ab9c78f 100644 > --- a/arch/arm/boot/dts/am33xx.dtsi > +++ b/arch/arm/boot/dts/am33xx.dtsi > @@ -62,6 +62,37 @@ > reg = <0x48200000 0x1000>; > }; > > + edma: edma@49000000 { > + compatible = "ti,edma3"; > + ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; > + reg = <0x49000000 0x10000>, > + <0x44e10f90 0x10>; > + interrupt-parent = <&intc>; > + interrupts = <12 13 14>; > + #dma-cells = <1>; > + dma-channels = <64>; > + ti,edma-regions = <4>; > + ti,edma-slots = <256>; > + ti,edma-reserved-channels = <0 2 > + 14 2 > + 26 6 > + 48 4 > + 56 8>; > + ti,edma-reserved-slots = <0 2 > + 14 2 > + 26 6 > + 48 4 > + 56 8 > + 64 127>; No need to reserve any channels or slots on AM335x, I think. This is used on DaVinci devices to share channels with DSP. I am not sure the cortex-M3 or PRU on the AM335x need to (or even can) have EDMA access. Thanks, Sekhar