[PATCH] spi-gpio: init CS before spi_bitbang_setup()

[PATCH] spi-gpio: init CS before spi_bitbang_setup()

[Josef Ahmad]

spi_bitbang_setup() deasserts the chip select line to initialise
the device. The chip select GPIO line is obtained from
spi_gpio->cs_gpios[] private data.
Currently, devices that are not registered under devicetree
environment will call into spi_bitbang_setup() with stale
cs_gpios[].

This patch ensures spi_gpio->cs_gpios[] is always initialised prior
to calling spi_bitbang_setup().

Reviewed-by: Daniel Mack <zonque-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Josef Ahmad <josef.ahmad-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
 drivers/spi/spi-gpio.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c
index c7cf0b7..0fa345c 100644
--- a/drivers/spi/spi-gpio.c
+++ b/drivers/spi/spi-gpio.c
@@ -265,9 +265,9 @@ static int spi_gpio_setup(struct spi_device *spi)
 		}
 	}
 	if (!status) {
-		status = spi_bitbang_setup(spi);
 		/* in case it was initialized from static board data */
 		spi_gpio->cs_gpios[spi->chip_select] = cs;
+		status = spi_bitbang_setup(spi);
 	}
 
 	if (status) {
-- 
1.7.0.7


------------------------------------------------------------------------------
Precog is a next-generation analytics platform capable of advanced
analytics on semi-structured data. The platform includes APIs for building
apps and a phenomenal toolset for data science. Developers can use
our toolset for easy data analysis & visualization. Get a free account!
http://www2.precog.com/precogplatform/slashdotnewsletter

Re: [PATCH] spi-gpio: init CS before spi_bitbang_setup()

[Daniel Mack]

Cc: Mark

On 09.04.2013 18:40, Josef Ahmad wrote:
> spi_bitbang_setup() deasserts the chip select line to initialise
> the device. The chip select GPIO line is obtained from
> spi_gpio->cs_gpios[] private data.
> Currently, devices that are not registered under devicetree
> environment will call into spi_bitbang_setup() with stale
> cs_gpios[].
> 
> This patch ensures spi_gpio->cs_gpios[] is always initialised prior
> to calling spi_bitbang_setup().
> 
> Reviewed-by: Daniel Mack <zonque@gmail.com>
> Signed-off-by: Josef Ahmad <josef.ahmad@intel.com>
> ---
>  drivers/spi/spi-gpio.c |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c
> index c7cf0b7..0fa345c 100644
> --- a/drivers/spi/spi-gpio.c
> +++ b/drivers/spi/spi-gpio.c
> @@ -265,9 +265,9 @@ static int spi_gpio_setup(struct spi_device *spi)
>  		}
>  	}
>  	if (!status) {
> -		status = spi_bitbang_setup(spi);
>  		/* in case it was initialized from static board data */
>  		spi_gpio->cs_gpios[spi->chip_select] = cs;
> +		status = spi_bitbang_setup(spi);
>  	}
>  
>  	if (status) {
> 

Re: [PATCH] spi-gpio: init CS before spi_bitbang_setup()

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 335 bytes --]

On Tue, Apr 09, 2013 at 07:06:32PM +0200, Daniel Mack wrote:
> Cc: Mark
> 
> On 09.04.2013 18:40, Josef Ahmad wrote:
> > spi_bitbang_setup() deasserts the chip select line to initialise
> > the device. The chip select GPIO line is obtained from

Please resend the patch - git am doesn't know how to strip off quotation
stuff!

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [PATCH] spi-gpio: init CS before spi_bitbang_setup()

[Daniel Mack]

On 09.04.2013 19:08, Mark Brown wrote:
> On Tue, Apr 09, 2013 at 07:06:32PM +0200, Daniel Mack wrote:
>> Cc: Mark
>>
>> On 09.04.2013 18:40, Josef Ahmad wrote:
>>> spi_bitbang_setup() deasserts the chip select line to initialise
>>> the device. The chip select GPIO line is obtained from
> 
> Please resend the patch - git am doesn't know how to strip off quotation
> stuff!
> 

The reply was fyi only, as the patch also went to spi-devel-general. Can
you pick it from there or should Josef send it again with your address
in Cc:?


------------------------------------------------------------------------------
Precog is a next-generation analytics platform capable of advanced
analytics on semi-structured data. The platform includes APIs for building
apps and a phenomenal toolset for data science. Developers can use
our toolset for easy data analysis & visualization. Get a free account!
http://www2.precog.com/precogplatform/slashdotnewsletter

Re: [PATCH] spi-gpio: init CS before spi_bitbang_setup()

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 498 bytes --]

On Tue, Apr 09, 2013 at 07:11:21PM +0200, Daniel Mack wrote:

> The reply was fyi only, as the patch also went to spi-devel-general. Can
> you pick it from there or should Josef send it again with your address
> in Cc:?

Please make sure stuff goes to my inbox, I *can* pick up from
-devel-general but it's generally painful as my list traffic is going to
a different e-mail account and so on (plus I'm heavily backlogged on
list traffic in general at the minute, and sourceforge is full of spam).

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH] spi-gpio: init CS before spi_bitbang_setup()

[Josef Ahmad]

spi_bitbang_setup() deasserts the chip select line to initialise
the device. The chip select GPIO line is obtained from
spi_gpio->cs_gpios[] private data.
Currently, devices that are not registered under devicetree
environment will call into spi_bitbang_setup() with stale
cs_gpios[].

This patch ensures spi_gpio->cs_gpios[] is always initialised prior
to calling spi_bitbang_setup().

Reviewed-by: Daniel Mack <zonque-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Josef Ahmad <josef.ahmad-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
 drivers/spi/spi-gpio.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c
index c7cf0b7..0fa345c 100644
--- a/drivers/spi/spi-gpio.c
+++ b/drivers/spi/spi-gpio.c
@@ -265,9 +265,9 @@ static int spi_gpio_setup(struct spi_device *spi)
 		}
 	}
 	if (!status) {
-		status = spi_bitbang_setup(spi);
 		/* in case it was initialized from static board data */
 		spi_gpio->cs_gpios[spi->chip_select] = cs;
+		status = spi_bitbang_setup(spi);
 	}
 
 	if (status) {
-- 
1.7.0.7


------------------------------------------------------------------------------
Precog is a next-generation analytics platform capable of advanced
analytics on semi-structured data. The platform includes APIs for building
apps and a phenomenal toolset for data science. Developers can use
our toolset for easy data analysis & visualization. Get a free account!
http://www2.precog.com/precogplatform/slashdotnewsletter

Re: [PATCH] spi-gpio: init CS before spi_bitbang_setup()

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 240 bytes --]

On Tue, Apr 09, 2013 at 06:25:34PM +0100, Josef Ahmad wrote:
> spi_bitbang_setup() deasserts the chip select line to initialise
> the device. The chip select GPIO line is obtained from
> spi_gpio->cs_gpios[] private data.

Applied, thanks.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]