From: Heiner Kallweit <hkallweit1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Krzysztof Kozlowski
<k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Cc: linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: [PATCH 2/3] spi: s3c64xx: extend driver to make full use of runtime PM autosuspend
Date: Wed, 19 Aug 2015 21:54:52 +0200 [thread overview]
Message-ID: <55D4DF0C.8080104@gmail.com> (raw)
Extend the driver to make full use of runtime PM autosuspend.
Before only the SPI core was instructed to use autosuspend
by setting master->auto_runtime_pm. Nevertheless due to the missing
pm_runtime_use_autosuspend call autosuspend wasn't active.
Signed-off-by: Heiner Kallweit <hkallweit1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
drivers/spi/spi-s3c64xx.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 8a6ab88..8365c88 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -32,6 +32,7 @@
#define MAX_SPI_PORTS 6
#define S3C64XX_SPI_QUIRK_POLL (1 << 0)
#define S3C64XX_SPI_QUIRK_CS_AUTO (1 << 1)
+#define AUTOSUSPEND_TIMEOUT 2000
/* Registers and bit-fields */
@@ -859,13 +860,15 @@ static int s3c64xx_spi_setup(struct spi_device *spi)
}
}
- pm_runtime_put(&sdd->pdev->dev);
+ pm_runtime_mark_last_busy(&sdd->pdev->dev);
+ pm_runtime_put_autosuspend(&sdd->pdev->dev);
if (!(sdd->port_conf->quirks & S3C64XX_SPI_QUIRK_CS_AUTO))
writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
return 0;
setup_exit:
- pm_runtime_put(&sdd->pdev->dev);
+ pm_runtime_mark_last_busy(&sdd->pdev->dev);
+ pm_runtime_put_autosuspend(&sdd->pdev->dev);
/* setup() returns with device de-selected */
if (!(sdd->port_conf->quirks & S3C64XX_SPI_QUIRK_CS_AUTO))
writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
@@ -1180,6 +1183,8 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
S3C64XX_SPI_INT_TX_OVERRUN_EN | S3C64XX_SPI_INT_TX_UNDERRUN_EN,
sdd->regs + S3C64XX_SPI_INT_EN);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, AUTOSUSPEND_TIMEOUT);
+ pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
@@ -1195,6 +1200,9 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
mem_res, (FIFO_LVL_MASK(sdd) >> 1) + 1,
sdd->rx_dma.dmach, sdd->tx_dma.dmach);
+ pm_runtime_mark_last_busy(&pdev->dev);
+ pm_runtime_autosuspend(&pdev->dev);
+
return 0;
err4:
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2015-08-19 19:54 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-19 19:54 Heiner Kallweit [this message]
[not found] ` <55D4DF0C.8080104-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-08-19 23:46 ` [PATCH 2/3] spi: s3c64xx: extend driver to make full use of runtime PM autosuspend Krzysztof Kozlowski
[not found] ` <55D5154E.3090502-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2015-08-20 5:39 ` Heiner Kallweit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55D4DF0C.8080104@gmail.com \
--to=hkallweit1-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).