Re: [RFC v02 03/15] dmaengine: core: Introduce new, universal API to request a channel

[Peter Ujfalusi <peter.ujfalusi-l0cyMroinI0@public.gmane.org>]

On 12/01/2015 07:00 PM, Tony Lindgren wrote:
>> I see. The dm81xx basically am33xx/am43xx?
> 
> Yeah similar to am33xx with different clocks and with a bunch of accelerators.
> 
>> Actually I would prefer to use the dmaengine's event router framework and we
>> do have support for the am33xx/am43xx type of crossbar already implemented.
>> I'm going to resend the DTS series for am33xx/am43xx to convert them to use
>> the new DT bindings along with the dma event router support:
>> https://www.mail-archive.com/linux-omap%40vger.kernel.org/msg120828.html
> 
> OK yes a dmaengine event router works too when available. Good to see
> them as separate driver instances now :) Are only the dts changes missing
> now?
> 
> FYI, when we have separate interconnect driver instances, we don't want to
> and cannot tweak registers outside the interconnect instance because of them
> being in separate clock and/or power domains :p

What does this mean in practice? We can not touch these registers? The DMA
crossbar is a separate driver from the eDMA driver.

> In any case, it seems there's no harm using pinctrl for evtmux on dm81xx
> until the event router is available. It's currently only needed on the
> t410 emmc that I'm aware of :)

The AM33xx/AM43xx DMA crossbar support is in 4.4 already:
42dbdcc6bf96 dmaengine: ti-dma-crossbar: Add support for crossbar on AM33xx/AM43xx

-- 
Péter
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html