linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hiep Cao Minh <cm-hiep-HEF513clHfp3+QwDJ9on6Q@public.gmane.org>
To: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org,
	linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org,
	yoshihiro.shimoda.uh-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org,
	ryusuke.sakato.bx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org,
	linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	nv-dung-HEF513clHfp3+QwDJ9on6Q@public.gmane.org,
	h-inayoshi-HEF513clHfp3+QwDJ9on6Q@public.gmane.org
Subject: Re: Applied "spi: rspi: supports 32bytes buffer for DUAL and QUAD" to the spi tree
Date: Mon, 07 Nov 2016 09:20:38 +0900	[thread overview]
Message-ID: <581FC8D6.1010703@jinso.co.jp> (raw)
In-Reply-To: <E1c2iDN-0006rC-Am@finisterre>

Hi Mark,

On 11/05/2016 02:23 AM, Mark Brown wrote:
> The patch
>
>     spi: rspi: supports 32bytes buffer for DUAL and QUAD
>
> has been applied to the spi tree at
>
>     git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git

Thanks,

Best regards,
Jinzai Solution Inc.
Hiep.

> All being well this means that it will be integrated into the linux-next
> tree (usually sometime in the next 24 hours) and sent to Linus during
> the next merge window (or sooner if it is a bug fix), however if
> problems are discovered then the patch may be dropped or reverted.
>
> You may get further e-mails resulting from automated or manual testing
> and review of the tree, please engage with people reporting problems and
> send followup patches addressing any issues that are reported if needed.
>
> If any updates are required or you are submitting further changes they
> should be sent as incremental updates against current git, existing
> patches will not be replaced.
>
> Please add any relevant lists and maintainers to the CCs when replying
> to this mail.
>
> Thanks,
> Mark
>
> >From 3be09bec42a800d4f8ead8119c462f3eb4fad435 Mon Sep 17 00:00:00 2001
> From: Hiep Cao Minh <cm-hiep-HEF513clHfp3+QwDJ9on6Q@public.gmane.org>
> Date: Fri, 4 Nov 2016 17:38:54 +0900
> Subject: [PATCH] spi: rspi: supports 32bytes buffer for DUAL and QUAD
>
> This patch supports 32bytes of buffer for DUAL and QUAD in QSPI by
> Using Transmit/Receive Buffer Data Triggering Number.
> In order to improve the DUAL and QUAD's performance of SPI
> while transferring data in PIO mode, it sends/receives each 32bytes
> data instead of each byte data as current situation.
>
> Signed-off-by: Hiep Cao Minh <cm-hiep-HEF513clHfp3+QwDJ9on6Q@public.gmane.org>
> Signed-off-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> ---
>   drivers/spi/spi-rspi.c | 52 +++++++++++++++++++++++++++++++++++++++++++++++---
>   1 file changed, 49 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
> index a816f07e168e..3bab75ab1b25 100644
> --- a/drivers/spi/spi-rspi.c
> +++ b/drivers/spi/spi-rspi.c
> @@ -413,7 +413,7 @@ static unsigned int qspi_set_send_trigger(struct rspi_data *rspi,
>   	return n;
>   }
>   
> -static void qspi_set_receive_trigger(struct rspi_data *rspi, unsigned int len)
> +static int qspi_set_receive_trigger(struct rspi_data *rspi, unsigned int len)
>   {
>   	unsigned int n;
>   
> @@ -428,6 +428,7 @@ static void qspi_set_receive_trigger(struct rspi_data *rspi, unsigned int len)
>   		qspi_update(rspi, SPBFCR_RXTRG_MASK,
>   			     SPBFCR_RXTRG_1B, QSPI_SPBFCR);
>   	}
> +	return n;
>   }
>   
>   #define set_config_register(spi, n) spi->ops->set_config_register(spi, n)
> @@ -514,6 +515,51 @@ static int rspi_pio_transfer(struct rspi_data *rspi, const u8 *tx, u8 *rx,
>   	return 0;
>   }
>   
> +static int rspi_pio_transfer_in_or_our(struct rspi_data *rspi, const u8 *tx,
> +				       u8 *rx, unsigned int n)
> +{
> +	unsigned int i, len;
> +	int ret;
> +
> +	while (n > 0) {
> +		if (tx) {
> +			len = qspi_set_send_trigger(rspi, n);
> +			if (len == QSPI_BUFFER_SIZE) {
> +				ret = rspi_wait_for_tx_empty(rspi);
> +				if (ret < 0) {
> +					dev_err(&rspi->master->dev, "transmit timeout\n");
> +					return ret;
> +				}
> +				for (i = 0; i < len; i++)
> +					rspi_write_data(rspi, *tx++);
> +			} else {
> +				ret = rspi_pio_transfer(rspi, tx, NULL, n);
> +				if (ret < 0)
> +					return ret;
> +			}
> +		}
> +		if (rx) {
> +			len = qspi_set_receive_trigger(rspi, n);
> +			if (len == QSPI_BUFFER_SIZE) {
> +				ret = rspi_wait_for_rx_full(rspi);
> +				if (ret < 0) {
> +					dev_err(&rspi->master->dev, "receive timeout\n");
> +					return ret;
> +				}
> +				for (i = 0; i < len; i++)
> +					*rx++ = rspi_read_data(rspi);
> +			} else {
> +				ret = rspi_pio_transfer(rspi, NULL, rx, n);
> +				if (ret < 0)
> +					return ret;
> +				*rx++ = ret;
> +			}
> +		}
> +		n -= len;
> +	}
> +	return 0;
> +}
> +
>   static void rspi_dma_complete(void *arg)
>   {
>   	struct rspi_data *rspi = arg;
> @@ -793,7 +839,7 @@ static int qspi_transfer_out(struct rspi_data *rspi, struct spi_transfer *xfer)
>   			return ret;
>   	}
>   
> -	ret = rspi_pio_transfer(rspi, xfer->tx_buf, NULL, xfer->len);
> +	ret = rspi_pio_transfer_in_or_our(rspi, xfer->tx_buf, NULL, xfer->len);
>   	if (ret < 0)
>   		return ret;
>   
> @@ -811,7 +857,7 @@ static int qspi_transfer_in(struct rspi_data *rspi, struct spi_transfer *xfer)
>   			return ret;
>   	}
>   
> -	return rspi_pio_transfer(rspi, NULL, xfer->rx_buf, xfer->len);
> +	return rspi_pio_transfer_in_or_our(rspi, NULL, xfer->rx_buf, xfer->len);
>   }
>   
>   static int qspi_transfer_one(struct spi_master *master, struct spi_device *spi,

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2016-11-07  0:20 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-04  8:38 [PATCH 0/1] ARM: spi supports 32bytes buffer for DUAL and QUAD Cao Minh Hiep
     [not found] ` <1478248734-32044-1-git-send-email-cm-hiep-HEF513clHfp3+QwDJ9on6Q@public.gmane.org>
2016-11-04  8:38   ` [PATCH 1/1] " Cao Minh Hiep
2016-11-04 17:06     ` Mark Brown
2016-11-04 17:23     ` Applied "spi: rspi: supports 32bytes buffer for DUAL and QUAD" to the spi tree Mark Brown
2016-11-07  0:20       ` Hiep Cao Minh [this message]
     [not found]     ` <1478248734-32044-2-git-send-email-cm-hiep-HEF513clHfp3+QwDJ9on6Q@public.gmane.org>
2016-11-05  7:32       ` [PATCH 1/1] ARM: spi supports 32bytes buffer for DUAL and QUAD Niklas Söderlund
2016-11-07  0:27         ` Hiep Cao Minh
2016-11-04 15:49   ` [PATCH 0/1] " Mark Brown
2016-11-07  0:17     ` Hiep Cao Minh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=581FC8D6.1010703@jinso.co.jp \
    --to=cm-hiep-hef513clhfp3+qwdj9on6q@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org \
    --cc=h-inayoshi-HEF513clHfp3+QwDJ9on6Q@public.gmane.org \
    --cc=kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org \
    --cc=linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=nv-dung-HEF513clHfp3+QwDJ9on6Q@public.gmane.org \
    --cc=ryusuke.sakato.bx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org \
    --cc=yoshihiro.shimoda.uh-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).