linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Heiner Kallweit <hkallweit1@gmail.com>
To: "Mark Brown" <broonie@kernel.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Krzysztof Kozlowski" <krzysztof.kozlowski@canonical.com>,
	"Andreas Färber" <afaerber@suse.de>,
	"Geert Uytterhoeven" <geert+renesas@glider.be>,
	"Miguel Ojeda" <ojeda@kernel.org>,
	"Neil Armstrong" <narmstrong@baylibre.com>,
	"Kevin Hilman" <khilman@baylibre.com>,
	"Jerome Brunet" <jbrunet@baylibre.com>,
	"Martin Blumenstingl" <martin.blumenstingl@googlemail.com>
Cc: "linux-spi@vger.kernel.org" <linux-spi@vger.kernel.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
	"open list:ARM/Amlogic Meson..."
	<linux-amlogic@lists.infradead.org>
Subject: [PATCH v2 1/6] spi: gpio: Implement LSB First bitbang support
Date: Mon, 21 Feb 2022 21:20:46 +0100	[thread overview]
Message-ID: <6389315a-30ee-8106-209f-bf2462d12971@gmail.com> (raw)
In-Reply-To: <1f39432b-84e2-e6dc-a6b8-c48ad5cf2210@gmail.com>

From: Andreas Färber <afaerber@suse.de>

Add support for slave DT property spi-lsb-first, i.e., SPI_LSB_FIRST mode.
Duplicate the inline helpers bitbang_txrx_be_cpha{0,1} as LE versions.
Conditionally call them from all the spi-gpio txrx_word callbacks.

Some alternatives to this implementation approach were discussed back
then [0], but eventually it was considered reasonable.

[0] https://lore.kernel.org/linux-arm-kernel/20191212033952.5967-8-afaerber@suse.de/

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
 drivers/spi/spi-bitbang-txrx.h | 66 ++++++++++++++++++++++++++++++++++
 drivers/spi/spi-gpio.c         | 42 +++++++++++++++++-----
 2 files changed, 99 insertions(+), 9 deletions(-)

diff --git a/drivers/spi/spi-bitbang-txrx.h b/drivers/spi/spi-bitbang-txrx.h
index ae61d72c7..267342dfa 100644
--- a/drivers/spi/spi-bitbang-txrx.h
+++ b/drivers/spi/spi-bitbang-txrx.h
@@ -41,6 +41,8 @@
  * chips need ... there may be several reasons you'd need to tweak timings
  * in these routines, not just to make it faster or slower to match a
  * particular CPU clock rate.
+ *
+ * ToDo: Maybe the bitrev macros can be used to improve the code?
  */
 
 static inline u32
@@ -106,3 +108,67 @@ bitbang_txrx_be_cpha1(struct spi_device *spi,
 	}
 	return word;
 }
+
+static inline u32
+bitbang_txrx_le_cpha0(struct spi_device *spi,
+		unsigned int nsecs, unsigned int cpol, unsigned int flags,
+		u32 word, u8 bits)
+{
+	/* if (cpol == 0) this is SPI_MODE_0; else this is SPI_MODE_2 */
+
+	u32 oldbit = !(word & 1);
+	/* clock starts at inactive polarity */
+	for (; likely(bits); bits--) {
+
+		/* setup LSB (to slave) on trailing edge */
+		if ((flags & SPI_MASTER_NO_TX) == 0) {
+			if ((word & 1) != oldbit) {
+				setmosi(spi, word & 1);
+				oldbit = word & 1;
+			}
+		}
+		spidelay(nsecs);	/* T(setup) */
+
+		setsck(spi, !cpol);
+		spidelay(nsecs);
+
+		/* sample LSB (from slave) on leading edge */
+		word >>= 1;
+		if ((flags & SPI_MASTER_NO_RX) == 0)
+			word |= getmiso(spi) << (bits - 1);
+		setsck(spi, cpol);
+	}
+	return word;
+}
+
+static inline u32
+bitbang_txrx_le_cpha1(struct spi_device *spi,
+		unsigned int nsecs, unsigned int cpol, unsigned int flags,
+		u32 word, u8 bits)
+{
+	/* if (cpol == 0) this is SPI_MODE_1; else this is SPI_MODE_3 */
+
+	u32 oldbit = !(word & 1);
+	/* clock starts at inactive polarity */
+	for (; likely(bits); bits--) {
+
+		/* setup LSB (to slave) on leading edge */
+		setsck(spi, !cpol);
+		if ((flags & SPI_MASTER_NO_TX) == 0) {
+			if ((word & 1) != oldbit) {
+				setmosi(spi, word & 1);
+				oldbit = word & 1;
+			}
+		}
+		spidelay(nsecs); /* T(setup) */
+
+		setsck(spi, cpol);
+		spidelay(nsecs);
+
+		/* sample LSB (from slave) on trailing edge */
+		word >>= 1;
+		if ((flags & SPI_MASTER_NO_RX) == 0)
+			word |= getmiso(spi) << (bits - 1);
+	}
+	return word;
+}
diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c
index 0584f4d2f..4b12c4964 100644
--- a/drivers/spi/spi-gpio.c
+++ b/drivers/spi/spi-gpio.c
@@ -135,25 +135,37 @@ static inline int getmiso(const struct spi_device *spi)
 static u32 spi_gpio_txrx_word_mode0(struct spi_device *spi,
 		unsigned nsecs, u32 word, u8 bits, unsigned flags)
 {
-	return bitbang_txrx_be_cpha0(spi, nsecs, 0, flags, word, bits);
+	if (unlikely(spi->mode & SPI_LSB_FIRST))
+		return bitbang_txrx_le_cpha0(spi, nsecs, 0, flags, word, bits);
+	else
+		return bitbang_txrx_be_cpha0(spi, nsecs, 0, flags, word, bits);
 }
 
 static u32 spi_gpio_txrx_word_mode1(struct spi_device *spi,
 		unsigned nsecs, u32 word, u8 bits, unsigned flags)
 {
-	return bitbang_txrx_be_cpha1(spi, nsecs, 0, flags, word, bits);
+	if (unlikely(spi->mode & SPI_LSB_FIRST))
+		return bitbang_txrx_le_cpha1(spi, nsecs, 0, flags, word, bits);
+	else
+		return bitbang_txrx_be_cpha1(spi, nsecs, 0, flags, word, bits);
 }
 
 static u32 spi_gpio_txrx_word_mode2(struct spi_device *spi,
 		unsigned nsecs, u32 word, u8 bits, unsigned flags)
 {
-	return bitbang_txrx_be_cpha0(spi, nsecs, 1, flags, word, bits);
+	if (unlikely(spi->mode & SPI_LSB_FIRST))
+		return bitbang_txrx_le_cpha0(spi, nsecs, 1, flags, word, bits);
+	else
+		return bitbang_txrx_be_cpha0(spi, nsecs, 1, flags, word, bits);
 }
 
 static u32 spi_gpio_txrx_word_mode3(struct spi_device *spi,
 		unsigned nsecs, u32 word, u8 bits, unsigned flags)
 {
-	return bitbang_txrx_be_cpha1(spi, nsecs, 1, flags, word, bits);
+	if (unlikely(spi->mode & SPI_LSB_FIRST))
+		return bitbang_txrx_le_cpha1(spi, nsecs, 1, flags, word, bits);
+	else
+		return bitbang_txrx_be_cpha1(spi, nsecs, 1, flags, word, bits);
 }
 
 /*
@@ -170,28 +182,40 @@ static u32 spi_gpio_spec_txrx_word_mode0(struct spi_device *spi,
 		unsigned nsecs, u32 word, u8 bits, unsigned flags)
 {
 	flags = spi->master->flags;
-	return bitbang_txrx_be_cpha0(spi, nsecs, 0, flags, word, bits);
+	if (unlikely(spi->mode & SPI_LSB_FIRST))
+		return bitbang_txrx_le_cpha0(spi, nsecs, 0, flags, word, bits);
+	else
+		return bitbang_txrx_be_cpha0(spi, nsecs, 0, flags, word, bits);
 }
 
 static u32 spi_gpio_spec_txrx_word_mode1(struct spi_device *spi,
 		unsigned nsecs, u32 word, u8 bits, unsigned flags)
 {
 	flags = spi->master->flags;
-	return bitbang_txrx_be_cpha1(spi, nsecs, 0, flags, word, bits);
+	if (unlikely(spi->mode & SPI_LSB_FIRST))
+		return bitbang_txrx_le_cpha1(spi, nsecs, 0, flags, word, bits);
+	else
+		return bitbang_txrx_be_cpha1(spi, nsecs, 0, flags, word, bits);
 }
 
 static u32 spi_gpio_spec_txrx_word_mode2(struct spi_device *spi,
 		unsigned nsecs, u32 word, u8 bits, unsigned flags)
 {
 	flags = spi->master->flags;
-	return bitbang_txrx_be_cpha0(spi, nsecs, 1, flags, word, bits);
+	if (unlikely(spi->mode & SPI_LSB_FIRST))
+		return bitbang_txrx_le_cpha0(spi, nsecs, 1, flags, word, bits);
+	else
+		return bitbang_txrx_be_cpha0(spi, nsecs, 1, flags, word, bits);
 }
 
 static u32 spi_gpio_spec_txrx_word_mode3(struct spi_device *spi,
 		unsigned nsecs, u32 word, u8 bits, unsigned flags)
 {
 	flags = spi->master->flags;
-	return bitbang_txrx_be_cpha1(spi, nsecs, 1, flags, word, bits);
+	if (unlikely(spi->mode & SPI_LSB_FIRST))
+		return bitbang_txrx_le_cpha1(spi, nsecs, 1, flags, word, bits);
+	else
+		return bitbang_txrx_be_cpha1(spi, nsecs, 1, flags, word, bits);
 }
 
 /*----------------------------------------------------------------------*/
@@ -378,7 +402,7 @@ static int spi_gpio_probe(struct platform_device *pdev)
 
 	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
 	master->mode_bits = SPI_3WIRE | SPI_3WIRE_HIZ | SPI_CPHA | SPI_CPOL |
-			    SPI_CS_HIGH;
+			    SPI_CS_HIGH | SPI_LSB_FIRST;
 	if (!spi_gpio->mosi) {
 		/* HW configuration without MOSI pin
 		 *
-- 
2.35.1


  reply	other threads:[~2022-02-21 20:26 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-21 20:19 [PATCH v2 0/6] auxdisplay: Add support for the Titanmec TM1628 7 segment display controller Heiner Kallweit
2022-02-21 20:20 ` Heiner Kallweit [this message]
2022-02-21 20:21 ` [PATCH v2 2/6] dt-bindings: vendor-prefixes: Add Titan Micro Electronics Heiner Kallweit
2022-02-21 20:23 ` [PATCH v2 3/6] dt-bindings: auxdisplay: Add Titan Micro Electronics TM1628 Heiner Kallweit
2022-02-22 14:22   ` Rob Herring
2022-02-21 20:24 ` [PATCH v2 4/6] docs: ABI: document tm1628 attribute display-text Heiner Kallweit
2022-02-22  8:20   ` Geert Uytterhoeven
2022-02-21 20:25 ` [PATCH v2 5/6] auxdisplay: add support for Titanmec TM1628 7 segment display controller Heiner Kallweit
2022-02-22  8:19   ` Geert Uytterhoeven
2022-02-22  9:44     ` Heiner Kallweit
2022-02-22 12:16       ` Andreas Färber
2022-02-22 13:39         ` Heiner Kallweit
2022-02-21 20:26 ` [PATCH v2 6/6] arm64: dts: meson-gxl-s905w-tx3-mini: add support for the 7 segment display Heiner Kallweit
2022-02-21 22:10 ` [PATCH v2 0/6] auxdisplay: Add support for the Titanmec TM1628 7 segment display controller Miguel Ojeda
2022-02-21 22:57   ` Heiner Kallweit
2022-02-22 12:19     ` Andreas Färber

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6389315a-30ee-8106-209f-bf2462d12971@gmail.com \
    --to=hkallweit1@gmail.com \
    --cc=afaerber@suse.de \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=jbrunet@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=krzysztof.kozlowski@canonical.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=narmstrong@baylibre.com \
    --cc=ojeda@kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).