From: Michal Suchanek <hramrach@gmail.com>
To: Heiner Kallweit <hkallweit1@gmail.com>,
David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
Han Xu <han.xu@freescale.com>, Mark Brown <broonie@kernel.org>,
Michal Suchanek <hramrach@gmail.com>,
Boris Brezillon <boris.brezillon@free-electrons.com>,
Javier Martinez Canillas <javier@osg.samsung.com>,
"Rafal Milecki" <zajec5@gmail.com>,
Jagan Teki <jteki@openedev.com>, "Andrew F. Davis" <afd@ti.com>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
Gabor Juhos <juhosg@openwrt.org>,
"Bean Huo " <beanhuo@micron.com>,
Furquan Shaikh <furquan@google.com>,
linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-spi@vger.kernel.org,
Subject: [PATCH v6 05/10] mtd: spi-nor: stop passing around retlen
Date: 2 Dec 2015 10:38:20 -0000 [thread overview]
Message-ID: <8eb1ba678cf0caffd298046367a490186875b342.1449052427.git.hramrach@gmail.com> (raw)
In-Reply-To: <cover.1449052427.git.hramrach@gmail.com>
Do not pass retlen to hardware driver read/write functions. Update it in
spi-nor generic driver instead.
Signed-off-by: Michal Suchanek <hramrach@gmail.com>
---
drivers/mtd/devices/m25p80.c | 6 ++----
drivers/mtd/spi-nor/fsl-quadspi.c | 16 ++++++----------
drivers/mtd/spi-nor/spi-nor.c | 21 +++++++++++++--------
include/linux/mtd/spi-nor.h | 4 ++--
4 files changed, 23 insertions(+), 24 deletions(-)
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index fc694fd..58ecfa4 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -74,7 +74,7 @@ static int m25p80_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
}
static ssize_t m25p80_write(struct spi_nor *nor, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
+ const u_char *buf)
{
struct m25p *flash = nor->priv;
struct spi_device *spi = flash->spi;
@@ -106,7 +106,6 @@ static ssize_t m25p80_write(struct spi_nor *nor, loff_t to, size_t len,
ret = m.actual_length - cmd_sz;
if (ret < 0)
return -EIO;
- *retlen += ret;
return ret;
}
@@ -127,7 +126,7 @@ static inline unsigned int m25p80_rx_nbits(struct spi_nor *nor)
* may be any size provided it is within the physical boundaries.
*/
static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
- size_t *retlen, u_char *buf)
+ u_char *buf)
{
struct m25p *flash = nor->priv;
struct spi_device *spi = flash->spi;
@@ -161,7 +160,6 @@ static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
ret = m.actual_length - m25p_cmdsz(nor) - dummy;
if (ret < 0)
return -EIO;
- *retlen += ret;
return ret;
}
diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index 9beb739..7491fbb 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -577,7 +577,7 @@ static inline void fsl_qspi_invalid(struct fsl_qspi *q)
static ssize_t fsl_qspi_nor_write(struct fsl_qspi *q, struct spi_nor *nor,
u8 opcode, unsigned int to, u32 *txbuf,
- unsigned count, size_t *retlen)
+ unsigned count)
{
int ret, i, j;
u32 tmp;
@@ -604,11 +604,8 @@ static ssize_t fsl_qspi_nor_write(struct fsl_qspi *q, struct spi_nor *nor,
/* Trigger it */
ret = fsl_qspi_runcmd(q, opcode, to, count);
- if (ret == 0) {
- if (retlen)
- *retlen += count;
+ if (ret == 0)
return count;
- }
return ret;
}
@@ -816,7 +813,7 @@ static int fsl_qspi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
} else if (len > 0) {
ret = fsl_qspi_nor_write(q, nor, opcode, 0,
- (u32 *)buf, len, NULL);
+ (u32 *)buf, len);
if (ret > 0)
return 0;
} else {
@@ -828,12 +825,11 @@ static int fsl_qspi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
}
static ssize_t fsl_qspi_write(struct spi_nor *nor, loff_t to,
- size_t len, size_t *retlen, const u_char *buf)
+ size_t len, const u_char *buf)
{
struct fsl_qspi *q = nor->priv;
-
ssize_t ret = fsl_qspi_nor_write(q, nor, nor->program_opcode, to,
- (u32 *)buf, len, retlen);
+ (u32 *)buf, len);
/* invalid the data in the AHB buffer. */
fsl_qspi_invalid(q);
@@ -841,7 +837,7 @@ static ssize_t fsl_qspi_write(struct spi_nor *nor, loff_t to,
}
static ssize_t fsl_qspi_read(struct spi_nor *nor, loff_t from,
- size_t len, size_t *retlen, u_char *buf)
+ size_t len, u_char *buf)
{
struct fsl_qspi *q = nor->priv;
u8 cmd = nor->read_opcode;
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 5f91bfa..3d02803 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -907,12 +907,13 @@ static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len,
if (ret)
return ret;
- ret = nor->read(nor, from, len, retlen, buf);
+ ret = nor->read(nor, from, len, buf);
spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_READ);
if (ret < 0)
return ret;
+ *retlen += ret;
return 0;
}
@@ -939,7 +940,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
nor->program_opcode = SPINOR_OP_BP;
/* write one byte. */
- ret = nor->write(nor, to, 1, retlen, buf);
+ ret = nor->write(nor, to, 1, buf);
if (ret < 0)
goto sst_write_err;
WARN(ret != 1, "While writing 1 byte written %i bytes\n",
@@ -955,7 +956,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
nor->program_opcode = SPINOR_OP_AAI_WP;
/* write two bytes. */
- ret = nor->write(nor, to, 2, retlen, buf + actual);
+ ret = nor->write(nor, to, 2, buf + actual);
if (ret < 0)
goto sst_write_err;
WARN(ret != 2, "While writing 2 bytes written %i bytes\n",
@@ -978,7 +979,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
write_enable(nor);
nor->program_opcode = SPINOR_OP_BP;
- ret = nor->write(nor, to, 1, retlen, buf + actual);
+ ret = nor->write(nor, to, 1, buf + actual);
if (ret < 0)
goto sst_write_err;
WARN(ret != 1, "While writing 1 byte written %i bytes\n",
@@ -987,8 +988,10 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
if (ret)
goto sst_write_err;
write_disable(nor);
+ actual += 1;
}
sst_write_err:
+ *retlen += actual;
spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE);
return ret;
}
@@ -1017,15 +1020,17 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
/* do all the bytes fit onto one page? */
if (page_offset + len <= nor->page_size) {
- ret = nor->write(nor, to, len, retlen, buf);
+ ret = nor->write(nor, to, len, buf);
if (ret < 0)
goto write_err;
+ *retlen += ret;
} else {
/* the size of data remaining on the first page */
page_size = nor->page_size - page_offset;
- ret = nor->write(nor, to, page_size, retlen, buf);
+ ret = nor->write(nor, to, page_size, buf);
if (ret < 0)
goto write_err;
+ *retlen += ret;
/* write everything in nor->page_size chunks */
for (i = ret; i < len; ) {
@@ -1039,10 +1044,10 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
write_enable(nor);
- ret = nor->write(nor, to + i, page_size, retlen,
- buf + i);
+ ret = nor->write(nor, to + i, page_size, buf + i);
if (ret < 0)
goto write_err;
+ *retlen += ret;
i += ret;
}
}
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 6080701..c4b059b 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -172,9 +172,9 @@ struct spi_nor {
int (*write_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len);
ssize_t (*read)(struct spi_nor *nor, loff_t from,
- size_t len, size_t *retlen, u_char *read_buf);
+ size_t len, u_char *read_buf);
ssize_t (*write)(struct spi_nor *nor, loff_t to,
- size_t len, size_t *retlen, const u_char *write_buf);
+ size_t len, const u_char *write_buf);
int (*erase)(struct spi_nor *nor, loff_t offs);
int (*flash_lock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
--
2.6.2
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2015-12-02 10:38 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-02 10:38 [PATCH v6 00/10] Add error checking to spi-nor read and write Michal Suchanek
2015-12-02 10:38 ` [PATCH v6 03/10] mtd: fsl-quadspi: return amount of data read/written or error Michal Suchanek
2015-12-02 21:06 ` Han Xu
2015-12-02 23:07 ` Brian Norris
2015-12-02 10:38 ` [PATCH v6 02/10] mtd: m25p80: return amount of data transferred or error in read/write Michal Suchanek
2015-12-02 10:38 ` [PATCH v6 01/10] mtd: spi-nor: change return value of read/write Michal Suchanek
2015-12-02 10:38 ` [PATCH v6 06/10] mtd: spi-nor: simplify write loop Michal Suchanek
[not found] ` <2236d87ad516f118f58eb5df232d441f970c4499.1449052427.git.hramrach-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-12-15 20:22 ` Han Xu
2015-12-15 23:45 ` Michal Suchanek
2015-12-02 10:38 ` [PATCH v6 04/10] mtd: spi-nor: check return value from read/write Michal Suchanek
2015-12-02 10:38 ` Michal Suchanek [this message]
2015-12-02 10:38 ` [PATCH v6 07/10] mtd: spi-nor: add read loop Michal Suchanek
2015-12-02 10:38 ` [PATCH v6 10/10] mtd: m25p80: read in spi_max_transfer_size chunks Michal Suchanek
2015-12-02 10:38 ` [PATCH v6 09/10] spi: fsl-espi: expose maximum transfer size limit Michal Suchanek
2015-12-02 10:38 ` [PATCH v6 08/10] spi: expose master transfer size limitation Michal Suchanek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8eb1ba678cf0caffd298046367a490186875b342.1449052427.git.hramrach@gmail.com \
--to=hramrach@gmail.com \
--cc=afd@ti.com \
--cc=beanhuo@micron.com \
--cc=boris.brezillon@free-electrons.com \
--cc=broonie@kernel.org \
--cc=computersforpeace@gmail.com \
--cc=dwmw2@infradead.org \
--cc=furquan@google.com \
--cc=han.xu@freescale.com \
--cc=hkallweit1@gmail.com \
--cc=javier@osg.samsung.com \
--cc=jteki@openedev.com \
--cc=juhosg@openwrt.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-spi@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=zajec5@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).