Re: [PATCH 5/7] spi: s3c64xx: Add Exynos850 support

[Tudor Ambarus <tudor.ambarus@linaro.org>]

On 1/20/24 01:29, Sam Protsenko wrote:
> Add SPI port configuration for Exynos850 SoC. It has 3 USI blocks which
> can be configured in SPI mode:
> 
>   * spi_0: BLK_PERI_SPI_0 (0x13940000)
>   * spi_1: BLK_ALIVE_USI_CMGP00 (0x11d00000)
>   * spi_2: BLK_ALIVE_USI_CMGP01 (0x11d20000)
> 
> SPI FIFO depth is 64 bytes for all those SPI blocks, so the
> .fifo_lvl_mask value is set to 0x7f. All blocks have DIV_4 as the
> default internal clock divider, and an internal loopback mode to run
> a loopback test.
> 
> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>

Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>

> ---
>  drivers/spi/spi-s3c64xx.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
> index 0e48ffd499b9..f7d623ad6ac3 100644
> --- a/drivers/spi/spi-s3c64xx.c
> +++ b/drivers/spi/spi-s3c64xx.c
> @@ -1461,6 +1461,17 @@ static const struct s3c64xx_spi_port_config exynos5433_spi_port_config = {
>  	.quirks		= S3C64XX_SPI_QUIRK_CS_AUTO,
>  };
>  
> +static const struct s3c64xx_spi_port_config exynos850_spi_port_config = {
> +	.fifo_lvl_mask	= { 0x7f, 0x7f, 0x7f },

I'll come with a follow up patch on top of this. Having the dt alias
used as an index in the fifo_lvl_mask to determine the FIFO depth is
wrong. Not only because of the dependency on the alias, but also because
the fifo_lvl_mask value does not reflect the FIFO level reg field.
Playing with what we have now is ok by me, I find the patch good.

> +	.rx_lvl_offset	= 15,
> +	.tx_st_done	= 25,
> +	.clk_div	= 4,
> +	.high_speed	= true,
> +	.clk_from_cmu	= true,
> +	.has_loopback	= true,
> +	.quirks		= S3C64XX_SPI_QUIRK_CS_AUTO,
> +};
> +
>  static const struct s3c64xx_spi_port_config exynosautov9_spi_port_config = {
>  	.fifo_lvl_mask	= { 0x1ff, 0x1ff, 0x7f, 0x7f, 0x7f, 0x7f, 0x1ff, 0x7f,
>  			    0x7f, 0x7f, 0x7f, 0x7f},
> @@ -1515,6 +1526,9 @@ static const struct of_device_id s3c64xx_spi_dt_match[] = {
>  	{ .compatible = "samsung,exynos5433-spi",
>  			.data = (void *)&exynos5433_spi_port_config,
>  	},
> +	{ .compatible = "samsung,exynos850-spi",
> +			.data = (void *)&exynos850_spi_port_config,
> +	},
>  	{ .compatible = "samsung,exynosautov9-spi",
>  			.data = (void *)&exynosautov9_spi_port_config,
>  	},