From: Vladimir Oltean <olteanv@gmail.com>
To: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Mark Brown <broonie@kernel.org>, Peng Ma <peng.ma@nxp.com>,
linux-spi <linux-spi@vger.kernel.org>,
lkml <linux-kernel@vger.kernel.org>,
Vladimir Oltean <vladimir.oltean@nxp.com>,
Wolfram Sang <wsa@kernel.org>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
stable@vger.kernel.org
Subject: Re: [PATCH v4 2/4] spi: spi-fsl-dspi: Fix lockup if device is shutdown during SPI transfer
Date: Mon, 22 Jun 2020 14:17:50 +0300 [thread overview]
Message-ID: <CA+h21hr+P6hq52jpLSR0xo8QKi-5aRUE2n4yeumSbrdUOJsgFQ@mail.gmail.com> (raw)
In-Reply-To: <20200622110543.5035-2-krzk@kernel.org>
On Mon, 22 Jun 2020 at 14:08, Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> During shutdown, the driver should unregister the SPI controller
> and stop the hardware. Otherwise the dspi_transfer_one_message() could
> wait on completion infinitely.
>
> Additionally, calling spi_unregister_controller() first in device
> shutdown reverse-matches the probe function, where SPI controller is
> registered at the end.
>
> Fixes: dc234825997e ("spi: spi-fsl-dspi: Adding shutdown hook")
> Cc: <stable@vger.kernel.org>
> Reported-by: Vladimir Oltean <olteanv@gmail.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
>
> ---
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
>
> kexec() not tested, only system shutdown.
>
> Changes since v3:
> 1. New patch.
> ---
> drivers/spi/spi-fsl-dspi.c | 15 +--------------
> 1 file changed, 1 insertion(+), 14 deletions(-)
>
> diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
> index ec0fd0d366eb..ec7919d9c0d9 100644
> --- a/drivers/spi/spi-fsl-dspi.c
> +++ b/drivers/spi/spi-fsl-dspi.c
> @@ -1452,20 +1452,7 @@ static int dspi_remove(struct platform_device *pdev)
>
> static void dspi_shutdown(struct platform_device *pdev)
> {
> - struct spi_controller *ctlr = platform_get_drvdata(pdev);
> - struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr);
> -
> - /* Disable RX and TX */
> - regmap_update_bits(dspi->regmap, SPI_MCR,
> - SPI_MCR_DIS_TXF | SPI_MCR_DIS_RXF,
> - SPI_MCR_DIS_TXF | SPI_MCR_DIS_RXF);
> -
> - /* Stop Running */
> - regmap_update_bits(dspi->regmap, SPI_MCR, SPI_MCR_HALT, SPI_MCR_HALT);
> -
> - dspi_release_dma(dspi);
> - clk_disable_unprepare(dspi->clk);
> - spi_unregister_controller(dspi->ctlr);
> + dspi_remove(pdev);
> }
>
> static struct platform_driver fsl_dspi_driver = {
> --
> 2.17.1
>
next prev parent reply other threads:[~2020-06-22 11:18 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-22 11:05 [PATCH v4 1/4] spi: spi-fsl-dspi: Fix lockup if device is removed during SPI transfer Krzysztof Kozlowski
2020-06-22 11:05 ` [PATCH v4 2/4] spi: spi-fsl-dspi: Fix lockup if device is shutdown " Krzysztof Kozlowski
2020-06-22 11:17 ` Vladimir Oltean [this message]
2020-06-22 11:05 ` [PATCH v4 3/4] spi: spi-fsl-dspi: Fix external abort on interrupt in resume or exit paths Krzysztof Kozlowski
2020-06-22 11:17 ` Vladimir Oltean
2020-06-22 11:05 ` [PATCH v4 4/4] spi: spi-fsl-dspi: Initialize completion before possible interrupt Krzysztof Kozlowski
2020-06-22 11:17 ` [PATCH v4 1/4] spi: spi-fsl-dspi: Fix lockup if device is removed during SPI transfer Vladimir Oltean
2020-06-22 14:59 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CA+h21hr+P6hq52jpLSR0xo8QKi-5aRUE2n4yeumSbrdUOJsgFQ@mail.gmail.com \
--to=olteanv@gmail.com \
--cc=broonie@kernel.org \
--cc=kernel@pengutronix.de \
--cc=krzk@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=peng.ma@nxp.com \
--cc=stable@vger.kernel.org \
--cc=vladimir.oltean@nxp.com \
--cc=wsa@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).