Linux SPI subsystem development
 help / color / mirror / Atom feed
From: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Leilk Liu <leilk.liu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>,
	Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Applied "spi: support spi without dma channel to use can_dma()" to the spi tree
Date: Fri, 24 Jul 2015 18:49:44 +0100	[thread overview]
Message-ID: <E1ZIh6O-0002zu-1C@debutante> (raw)
In-Reply-To: <1435583070-9600-2-git-send-email-leilk.liu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>

The patch

   spi: support spi without dma channel to use can_dma()

has been applied to the spi tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From c37f45b5f1cdfcdc351d88950b32658c970582ca Mon Sep 17 00:00:00 2001
From: Leilk Liu <leilk.liu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Date: Thu, 23 Jul 2015 17:10:40 +0800
Subject: [PATCH] spi: support spi without dma channel to use can_dma()

For spi without dma channel and use can_dma(), it can
use master->dev for struct device.

Signed-off-by: Leilk Liu <leilk.liu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Signed-off-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 drivers/spi/spi.c | 22 ++++++++++++++++++----
 1 file changed, 18 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index cf8b91b23a76..f725085a5f07 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -539,8 +539,15 @@ static int __spi_map_msg(struct spi_master *master, struct spi_message *msg)
 	if (!master->can_dma)
 		return 0;
 
-	tx_dev = master->dma_tx->device->dev;
-	rx_dev = master->dma_rx->device->dev;
+	if (master->dma_tx)
+		tx_dev = master->dma_tx->device->dev;
+	else
+		tx_dev = &master->dev;
+
+	if (master->dma_rx)
+		rx_dev = master->dma_rx->device->dev;
+	else
+		rx_dev = &master->dev;
 
 	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
 		if (!master->can_dma(master, msg->spi, xfer))
@@ -579,8 +586,15 @@ static int __spi_unmap_msg(struct spi_master *master, struct spi_message *msg)
 	if (!master->cur_msg_mapped || !master->can_dma)
 		return 0;
 
-	tx_dev = master->dma_tx->device->dev;
-	rx_dev = master->dma_rx->device->dev;
+	if (master->dma_tx)
+		tx_dev = master->dma_tx->device->dev;
+	else
+		tx_dev = &master->dev;
+
+	if (master->dma_rx)
+		rx_dev = master->dma_rx->device->dev;
+	else
+		rx_dev = &master->dev;
 
 	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
 		if (!master->can_dma(master, msg->spi, xfer))
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2015-07-24 17:49 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-29 13:04 [PATCH v2 0/4] Add Mediatek SPI bus driver Leilk Liu
     [not found] ` <1435583070-9600-1-git-send-email-leilk.liu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2015-06-29 13:04   ` [PATCH v2 1/4] spi: support spi without dma channel to use can_dma() Leilk Liu
     [not found]     ` <1435583070-9600-2-git-send-email-leilk.liu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2015-07-24 17:49       ` Mark Brown [this message]
2015-06-29 13:04   ` [PATCH v2 4/4] arm64: dts: Add spi bus dts Leilk Liu
     [not found]     ` <1435583070-9600-5-git-send-email-leilk.liu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2015-06-30  4:43       ` Daniel Kurtz
2015-06-30  7:55       ` Daniel Kurtz
2015-06-29 13:04 ` [PATCH v2 2/4] dt-bindings: ARM: Mediatek: Document devicetree bindings for spi bus Leilk Liu
2015-07-03 22:15   ` Matthias Brugger
     [not found]   ` <1435583070-9600-3-git-send-email-leilk.liu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2015-07-02  3:04     ` Daniel Kurtz
     [not found]       ` <CAGS+omBLNWUnNCt5XEAAqiCxzCZOsNQOXSK0ij13Wxro+Q9qLQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-07-02  7:43         ` leilk liu
2015-07-05 16:55     ` Jonas Gorski
2015-06-29 13:04 ` [PATCH v2 3/4] spi: mediatek: Add spi bus for Mediatek MT8173 Leilk Liu
     [not found]   ` <1435583070-9600-4-git-send-email-leilk.liu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2015-06-30 13:35     ` Alexey Klimov
     [not found]       ` <CALW4P+++mD-pLFGmAF0__F-1nOqTzEi7ScXVkrKrKfOSN0K=vA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-07-02  8:20         ` leilk liu
2015-07-01  4:06     ` Daniel Kurtz
     [not found]       ` <CAGS+omD3anZyJST90QVoJ5N-OPsdYYj3_Fq0rJSXADt84EL6yg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-07-01  5:07         ` Sascha Hauer
2015-07-08 11:32       ` leilk liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1ZIh6O-0002zu-1C@debutante \
    --to=broonie-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
    --cc=leilk.liu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
    --cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox