Linux SPI subsystem development
 help / color / mirror / Atom feed
From: Mark Brown <broonie@kernel.org>
To: stable@vger.kernel.org,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Mark Brown <broonie@kernel.org>
Cc: linux-spi@vger.kernel.org
Subject: Applied "spi: dw: explicitly free IRQ handler in dw_spi_remove_host()" to the spi tree
Date: Fri, 23 Oct 2015 08:11:01 +0900	[thread overview]
Message-ID: <E1ZpP0f-0000MP-5w@finisterre> (raw)
In-Reply-To: 

The patch

   spi: dw: explicitly free IRQ handler in dw_spi_remove_host()

has been applied to the spi tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 9f89566dac9ad776ad4d919922e99d799731e513 Mon Sep 17 00:00:00 2001
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Tue, 20 Oct 2015 11:39:36 +0300
Subject: [PATCH] spi: dw: explicitly free IRQ handler in dw_spi_remove_host()

The following warning occurs when DW SPI is compiled as a module and it's a PCI
device. On the removal stage pcibios_free_irq() is called earlier than
free_irq() due to the latter is called at managed resources free strage.

------------[ cut here ]------------
WARNING: CPU: 1 PID: 1003 at /home/andy/prj/linux/fs/proc/generic.c:575 remove_proc_entry+0x118/0x150()
remove_proc_entry: removing non-empty directory 'irq/38', leaking at least 'dw_spi1'
Modules linked in: spi_dw_midpci(-) spi_dw [last unloaded: dw_dmac_core]
CPU: 1 PID: 1003 Comm: modprobe Not tainted 4.3.0-rc5-next-20151013+ #32
 00000000 00000000 f5535d70 c12dc220 f5535db0 f5535da0 c104e912 c198a6bc
 f5535dcc 000003eb c198a638 0000023f c11b4098 c11b4098 f54f1ec8 f54f1ea0
 f642ba20 f5535db8 c104e96e 00000009 f5535db0 c198a6bc f5535dcc f5535df0
Call Trace:
 [<c12dc220>] dump_stack+0x41/0x61
 [<c104e912>] warn_slowpath_common+0x82/0xb0
 [<c11b4098>] ? remove_proc_entry+0x118/0x150
 [<c11b4098>] ? remove_proc_entry+0x118/0x150
 [<c104e96e>] warn_slowpath_fmt+0x2e/0x30
 [<c11b4098>] remove_proc_entry+0x118/0x150
 [<c109b96a>] unregister_irq_proc+0xaa/0xc0
 [<c109575e>] free_desc+0x1e/0x60
 [<c10957d2>] irq_free_descs+0x32/0x70
 [<c109b1a0>] irq_domain_free_irqs+0x120/0x150
 [<c1039e8c>] mp_unmap_irq+0x5c/0x60
 [<c16277b0>] intel_mid_pci_irq_disable+0x20/0x40
 [<c1627c7f>] pcibios_free_irq+0xf/0x20
 [<c13189f2>] pci_device_remove+0x52/0xb0
 [<c13f6367>] __device_release_driver+0x77/0x100
 [<c13f6da7>] driver_detach+0x87/0x90
 [<c13f5eaa>] bus_remove_driver+0x4a/0xc0
 [<c128bf0d>] ? selinux_capable+0xd/0x10
 [<c13f7483>] driver_unregister+0x23/0x60
 [<c10bad8a>] ? find_module_all+0x5a/0x80
 [<c1317413>] pci_unregister_driver+0x13/0x60
 [<f80ac654>] dw_spi_driver_exit+0xd/0xf [spi_dw_midpci]
 [<c10bce9a>] SyS_delete_module+0x17a/0x210

Explicitly call free_irq() at removal stage of the DW SPI driver.

Fixes: 04f421e7b0b1 (spi: dw: use managed resources)
Cc: stable@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/spi/spi-dw.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index cc2e980..ad66bc5 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -542,6 +542,8 @@ void dw_spi_remove_host(struct dw_spi *dws)
 {
 	dw_spi_debugfs_remove(dws);
 
+	free_irq(dws->irq, dws->master);
+
 	if (dws->dma_ops && dws->dma_ops->dma_exit)
 		dws->dma_ops->dma_exit(dws);
 
-- 
2.6.1

             reply	other threads:[~2015-10-22 23:11 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-22 23:11 Mark Brown [this message]
2015-10-23  7:40 ` Applied "spi: dw: explicitly free IRQ handler in dw_spi_remove_host()" to the spi tree Andy Shevchenko
     [not found]   ` <1445586058.22669.55.camel-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2015-10-23 16:18     ` Mark Brown
     [not found]       ` <20151023161810.GH29919-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2015-10-23 16:25         ` Andy Shevchenko
     [not found]           ` <1445617533.22669.64.camel-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2015-10-23 16:30             ` Shevchenko, Andriy
  -- strict thread matches above, loose matches on Subject: below --
2015-10-20  9:11 [PATCH v3 1/2] spi: dw: explicitly free IRQ handler in dw_spi_remove_host() Andy Shevchenko
     [not found] ` <1445332301-15126-2-git-send-email-andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2015-10-20 19:32   ` Applied "spi: dw: explicitly free IRQ handler in dw_spi_remove_host()" to the spi tree Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1ZpP0f-0000MP-5w@finisterre \
    --to=broonie@kernel.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=linux-spi@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox