From: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Vladimir Zapolskiy
<vladimir_zapolskiy-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>,
Anton Bondarenko
<anton.bondarenko.sama-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Applied "spi: imx: return error from dma channel request" to the spi tree
Date: Tue, 15 Dec 2015 22:41:25 +0000 [thread overview]
Message-ID: <E1a8yHd-0008IY-B6@debutante> (raw)
In-Reply-To: <1449557030-27525-4-git-send-email-anton.bondarenko.sama-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
The patch
spi: imx: return error from dma channel request
has been applied to the spi tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 3760047a7d83353163b69b96d216a13148a321d9 Mon Sep 17 00:00:00 2001
From: Anton Bondarenko <anton.bondarenko.sama-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date: Tue, 8 Dec 2015 07:43:45 +0100
Subject: [PATCH] spi: imx: return error from dma channel request
On SDMA initialization return exactly the same error, which is
reported by dma_request_slave_channel_reason(), it is a preceding
change to defer SPI DMA initialization, if SDMA module is not yet
available.
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>
Signed-off-by: Anton Bondarenko <anton.bondarenko.sama-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
drivers/spi/spi-imx.c | 27 ++++++++++++++++-----------
1 file changed, 16 insertions(+), 11 deletions(-)
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 17a90dcab328..c12306099d24 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -848,10 +848,11 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
spi_imx->wml = spi_imx_get_fifosize(spi_imx) / 2;
/* Prepare for TX DMA: */
- master->dma_tx = dma_request_slave_channel(dev, "tx");
- if (!master->dma_tx) {
- dev_err(dev, "cannot get the TX DMA channel!\n");
- ret = -EINVAL;
+ master->dma_tx = dma_request_slave_channel_reason(dev, "tx");
+ if (IS_ERR(master->dma_tx)) {
+ ret = PTR_ERR(master->dma_tx);
+ dev_dbg(dev, "can't get the TX DMA channel, error %d!\n", ret);
+ master->dma_tx = NULL;
goto err;
}
@@ -866,10 +867,11 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
}
/* Prepare for RX : */
- master->dma_rx = dma_request_slave_channel(dev, "rx");
- if (!master->dma_rx) {
- dev_dbg(dev, "cannot get the DMA channel.\n");
- ret = -EINVAL;
+ master->dma_rx = dma_request_slave_channel_reason(dev, "rx");
+ if (IS_ERR(master->dma_rx)) {
+ ret = PTR_ERR(master->dma_rx);
+ dev_dbg(dev, "can't get the RX DMA channel, error %d\n", ret);
+ master->dma_rx = NULL;
goto err;
}
@@ -1218,9 +1220,12 @@ static int spi_imx_probe(struct platform_device *pdev)
* Only validated on i.mx6 now, can remove the constrain if validated on
* other chips.
*/
- if (is_imx51_ecspi(spi_imx) &&
- spi_imx_sdma_init(&pdev->dev, spi_imx, master, res))
- dev_err(&pdev->dev, "dma setup error,use pio instead\n");
+ if (is_imx51_ecspi(spi_imx)) {
+ ret = spi_imx_sdma_init(&pdev->dev, spi_imx, master, res);
+ if (ret < 0)
+ dev_err(&pdev->dev, "dma setup error %d, use pio\n",
+ ret);
+ }
spi_imx->devtype_data->reset(spi_imx);
--
2.6.2
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-12-15 22:41 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-08 6:43 [PATCH v6 0/8] Improvements for SPI IMX driver for Freescale ECSPI controller, continuation Anton Bondarenko
2015-12-08 6:43 ` [PATCH v6 1/8] spi: imx: fix loopback mode setup after controller reset Anton Bondarenko
[not found] ` <1449557030-27525-2-git-send-email-anton.bondarenko.sama-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-12-15 22:41 ` Applied "spi: imx: fix loopback mode setup after controller reset" to the spi tree Mark Brown
2015-12-08 6:43 ` [PATCH v6 2/8] spi: imx: enable loopback only for ECSPI controller family Anton Bondarenko
[not found] ` <1449557030-27525-3-git-send-email-anton.bondarenko.sama-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-12-15 22:41 ` Applied "spi: imx: enable loopback only for ECSPI controller family" to the spi tree Mark Brown
2015-12-08 6:43 ` [PATCH v6 3/8] spi: imx: return error from dma channel request Anton Bondarenko
[not found] ` <1449557030-27525-4-git-send-email-anton.bondarenko.sama-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-12-15 22:41 ` Mark Brown [this message]
2015-12-08 6:43 ` [PATCH v6 4/8] spi: imx: defer spi initialization, if DMA engine is Anton Bondarenko
2015-12-08 6:43 ` [PATCH v6 5/8] spi: imx: allow only WML aligned transfers to use DMA Anton Bondarenko
2015-12-15 18:27 ` Mark Brown
2015-12-08 6:43 ` [PATCH v6 6/8] spi: imx: remove dead RX DMA tail handling code Anton Bondarenko
2015-12-08 6:43 ` [PATCH v6 7/8] spi: imx: replace fixed timeout with calculated Anton Bondarenko
2015-12-08 6:43 ` [PATCH v6 8/8] spi: imx: add support for all SPI word width for DMA Anton Bondarenko
[not found] ` <1449557030-27525-9-git-send-email-anton.bondarenko.sama-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-12-15 9:41 ` Robin Gong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1a8yHd-0008IY-B6@debutante \
--to=broonie-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
--cc=anton.bondarenko.sama-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=vladimir_zapolskiy-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox