From: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Akinobu Mita <akinobu.mita-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Subject: Applied "spi: omap2-mcspi: Undo broken fix for dma transfer of vmalloced buffer" to the spi tree
Date: Tue, 12 Apr 2016 03:01:22 +0100 [thread overview]
Message-ID: <E1apndq-0002S5-8J@debutante> (raw)
In-Reply-To: <1460140995-4062-1-git-send-email-akinobu.mita-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
The patch
spi: omap2-mcspi: Undo broken fix for dma transfer of vmalloced buffer
has been applied to the spi tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 8070954d7c9fffa527e785292e901867338f79a9 Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date: Sat, 9 Apr 2016 03:43:15 +0900
Subject: [PATCH] spi: omap2-mcspi: Undo broken fix for dma transfer of
vmalloced buffer
This reverts commit 3525e0aac91c4de5d20b1f22a6c6e2b39db3cc96.
The DMA transfer for RX buffer was not handled correctly in this change.
The actual transfer length for DMA RX can be less than xfer->len in the
specific condition and the last words will be filled after the DMA
completion, but the commit doesn't consider it and the dmaengine is
started with rx_sg mapped by spi core.
The solution for this at least requires more lines than this commit
has inserted. So revert it for now.
Signed-off-by: Akinobu Mita <akinobu.mita-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
drivers/spi/spi-omap2-mcspi.c | 62 +++++++++++++++++++++++++++++++------------
1 file changed, 45 insertions(+), 17 deletions(-)
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 43a02e377b3b..0caa3c8bef46 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -423,12 +423,16 @@ static void omap2_mcspi_tx_dma(struct spi_device *spi,
if (mcspi_dma->dma_tx) {
struct dma_async_tx_descriptor *tx;
+ struct scatterlist sg;
dmaengine_slave_config(mcspi_dma->dma_tx, &cfg);
- tx = dmaengine_prep_slave_sg(mcspi_dma->dma_tx, xfer->tx_sg.sgl,
- xfer->tx_sg.nents, DMA_MEM_TO_DEV,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ sg_init_table(&sg, 1);
+ sg_dma_address(&sg) = xfer->tx_dma;
+ sg_dma_len(&sg) = xfer->len;
+
+ tx = dmaengine_prep_slave_sg(mcspi_dma->dma_tx, &sg, 1,
+ DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (tx) {
tx->callback = omap2_mcspi_tx_callback;
tx->callback_param = spi;
@@ -474,15 +478,20 @@ omap2_mcspi_rx_dma(struct spi_device *spi, struct spi_transfer *xfer,
if (mcspi_dma->dma_rx) {
struct dma_async_tx_descriptor *tx;
+ struct scatterlist sg;
dmaengine_slave_config(mcspi_dma->dma_rx, &cfg);
if ((l & OMAP2_MCSPI_CHCONF_TURBO) && mcspi->fifo_depth == 0)
dma_count -= es;
- tx = dmaengine_prep_slave_sg(mcspi_dma->dma_rx, xfer->rx_sg.sgl,
- xfer->rx_sg.nents, DMA_DEV_TO_MEM,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ sg_init_table(&sg, 1);
+ sg_dma_address(&sg) = xfer->rx_dma;
+ sg_dma_len(&sg) = dma_count;
+
+ tx = dmaengine_prep_slave_sg(mcspi_dma->dma_rx, &sg, 1,
+ DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT |
+ DMA_CTRL_ACK);
if (tx) {
tx->callback = omap2_mcspi_rx_callback;
tx->callback_param = spi;
@@ -496,6 +505,8 @@ omap2_mcspi_rx_dma(struct spi_device *spi, struct spi_transfer *xfer,
omap2_mcspi_set_dma_req(spi, 1, 1);
wait_for_completion(&mcspi_dma->dma_rx_completion);
+ dma_unmap_single(mcspi->dev, xfer->rx_dma, count,
+ DMA_FROM_DEVICE);
if (mcspi->fifo_depth > 0)
return count;
@@ -608,6 +619,8 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
if (tx != NULL) {
wait_for_completion(&mcspi_dma->dma_tx_completion);
+ dma_unmap_single(mcspi->dev, xfer->tx_dma, xfer->len,
+ DMA_TO_DEVICE);
if (mcspi->fifo_depth > 0) {
irqstat_reg = mcspi->base + OMAP2_MCSPI_IRQSTATUS;
@@ -1074,16 +1087,6 @@ static void omap2_mcspi_cleanup(struct spi_device *spi)
gpio_free(spi->cs_gpio);
}
-static bool omap2_mcspi_can_dma(struct spi_master *master,
- struct spi_device *spi,
- struct spi_transfer *xfer)
-{
- if (xfer->len < DMA_MIN_BYTES)
- return false;
-
- return true;
-}
-
static int omap2_mcspi_work_one(struct omap2_mcspi *mcspi,
struct spi_device *spi, struct spi_transfer *t)
{
@@ -1265,6 +1268,32 @@ static int omap2_mcspi_transfer_one(struct spi_master *master,
return -EINVAL;
}
+ if (len < DMA_MIN_BYTES)
+ goto skip_dma_map;
+
+ if (mcspi_dma->dma_tx && tx_buf != NULL) {
+ t->tx_dma = dma_map_single(mcspi->dev, (void *) tx_buf,
+ len, DMA_TO_DEVICE);
+ if (dma_mapping_error(mcspi->dev, t->tx_dma)) {
+ dev_dbg(mcspi->dev, "dma %cX %d bytes error\n",
+ 'T', len);
+ return -EINVAL;
+ }
+ }
+ if (mcspi_dma->dma_rx && rx_buf != NULL) {
+ t->rx_dma = dma_map_single(mcspi->dev, rx_buf, t->len,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(mcspi->dev, t->rx_dma)) {
+ dev_dbg(mcspi->dev, "dma %cX %d bytes error\n",
+ 'R', len);
+ if (tx_buf != NULL)
+ dma_unmap_single(mcspi->dev, t->tx_dma,
+ len, DMA_TO_DEVICE);
+ return -EINVAL;
+ }
+ }
+
+skip_dma_map:
return omap2_mcspi_work_one(mcspi, spi, t);
}
@@ -1348,7 +1377,6 @@ static int omap2_mcspi_probe(struct platform_device *pdev)
master->transfer_one = omap2_mcspi_transfer_one;
master->set_cs = omap2_mcspi_set_cs;
master->cleanup = omap2_mcspi_cleanup;
- master->can_dma = omap2_mcspi_can_dma;
master->dev.of_node = node;
master->max_speed_hz = OMAP2_MCSPI_MAX_FREQ;
master->min_speed_hz = OMAP2_MCSPI_MAX_FREQ >> 15;
--
2.8.0.rc3
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-04-12 2:01 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-08 18:43 [PATCH] Revert "spi: omap2-mcspi: fix dma transfer for vmalloced buffer" Akinobu Mita
[not found] ` <1460140995-4062-1-git-send-email-akinobu.mita-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-04-12 1:22 ` Mark Brown
2016-04-12 2:01 ` Mark Brown [this message]
2016-05-11 15:39 ` Applied "spi: omap2-mcspi: Undo broken fix for dma transfer of vmalloced buffer" to the spi tree Akinobu Mita
[not found] ` <CAC5umyg2fJxYKOB4J96+3igkNx+eJs5MET8S8NnafZ3hcPPEag-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-05-11 16:20 ` Mark Brown
[not found] ` <20160511162030.GN6261-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2016-05-12 13:49 ` Akinobu Mita
[not found] ` <CAC5umyjoKfMBbO1JPyTjqsz4zuiZMQDZcKHxonZuEwqGpJxb_g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-05-12 15:44 ` Mark Brown
[not found] ` <20160512154436.GE6261-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2016-05-12 16:47 ` Akinobu Mita
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1apndq-0002S5-8J@debutante \
--to=broonie-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
--cc=akinobu.mita-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox