Linux SPI subsystem development
 help / color / mirror / Atom feed
From: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Andy Shevchenko
	<andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Cc: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Jan Kiszka <jan.kiszka-kv7WeFo6aLtBDgjK7y7TUQ@public.gmane.org>,
	Mika Westerberg
	<mika.westerberg-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>,
	linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Applied "spi: pxa2xx: Revert "Only claim CS GPIOs when the slave device is created"" to the spi tree
Date: Thu, 27 Jul 2017 20:02:36 +0100	[thread overview]
Message-ID: <E1dao3Q-0006Yz-PL@debutante> (raw)
In-Reply-To: <20170727100954.46801-1-andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>

The patch

   spi: pxa2xx: Revert "Only claim CS GPIOs when the slave device is created"

has been applied to the spi tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 6ac5a435ae6739c06ebbf79939e86e721b88a90f Mon Sep 17 00:00:00 2001
From: Andy Shevchenko <andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Date: Thu, 27 Jul 2017 14:37:08 +0300
Subject: [PATCH] spi: pxa2xx: Revert "Only claim CS GPIOs when the slave
 device is created"

There is a valid case to call setup() following by setup_cs() several
times for the same chip.

With the commit

  676a4e3bab44 ("spi: pxa2xx: Only claim CS GPIOs when the slave device is created")

it is not possible anymore due to GPIO line being requested already
during the first call to setup_cs().

For now, revert the commit to make things work again.

Signed-off-by: Andy Shevchenko <andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Signed-off-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 drivers/spi/spi-pxa2xx.c | 59 +++++++++++++++++++++++++++++++-----------------
 1 file changed, 38 insertions(+), 21 deletions(-)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index be991266a6ce..38d053682892 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1213,33 +1213,21 @@ static int setup_cs(struct spi_device *spi, struct chip_data *chip,
 		    struct pxa2xx_spi_chip *chip_info)
 {
 	struct driver_data *drv_data = spi_master_get_devdata(spi->master);
-	struct device *pdev = &drv_data->pdev->dev;
-	struct gpio_desc *gpiod;
 	int err = 0;
-	int count;
 
 	if (chip == NULL)
 		return 0;
 
-	count = gpiod_count(pdev, "cs");
-	if (count > 0) {
-		if (spi->chip_select >= count)
-			return -EINVAL;
-
-		gpiod = gpiod_get_index(pdev, "cs", spi->chip_select,
-					GPIOD_OUT_HIGH);
-		if (IS_ERR(gpiod)) {
-			/* Means use native chip select */
-			if (PTR_ERR(gpiod) == -ENOENT)
-				return 0;
+	if (drv_data->cs_gpiods) {
+		struct gpio_desc *gpiod;
 
-			return PTR_ERR(gpiod);
+		gpiod = drv_data->cs_gpiods[spi->chip_select];
+		if (gpiod) {
+			chip->gpio_cs = desc_to_gpio(gpiod);
+			chip->gpio_cs_inverted = spi->mode & SPI_CS_HIGH;
+			gpiod_set_value(gpiod, chip->gpio_cs_inverted);
 		}
 
-		chip->gpio_cs = desc_to_gpio(gpiod);
-		chip->gpio_cs_inverted = spi->mode & SPI_CS_HIGH;
-		gpiod_set_value(gpiod, chip->gpio_cs_inverted);
-
 		return 0;
 	}
 
@@ -1427,7 +1415,8 @@ static void cleanup(struct spi_device *spi)
 	if (!chip)
 		return;
 
-	if (drv_data->ssp_type != CE4100_SSP && gpio_is_valid(chip->gpio_cs))
+	if (drv_data->ssp_type != CE4100_SSP && !drv_data->cs_gpiods &&
+	    gpio_is_valid(chip->gpio_cs))
 		gpio_free(chip->gpio_cs);
 
 	kfree(chip);
@@ -1763,10 +1752,38 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
 	master->num_chipselect = platform_info->num_chipselect;
 
 	count = gpiod_count(&pdev->dev, "cs");
-	if (count > 0)
+	if (count > 0) {
+		int i;
+
 		master->num_chipselect = max_t(int, count,
 			master->num_chipselect);
 
+		drv_data->cs_gpiods = devm_kcalloc(&pdev->dev,
+			master->num_chipselect, sizeof(struct gpio_desc *),
+			GFP_KERNEL);
+		if (!drv_data->cs_gpiods) {
+			status = -ENOMEM;
+			goto out_error_clock_enabled;
+		}
+
+		for (i = 0; i < master->num_chipselect; i++) {
+			struct gpio_desc *gpiod;
+
+			gpiod = devm_gpiod_get_index(dev, "cs", i,
+						     GPIOD_OUT_HIGH);
+			if (IS_ERR(gpiod)) {
+				/* Means use native chip select */
+				if (PTR_ERR(gpiod) == -ENOENT)
+					continue;
+
+				status = (int)PTR_ERR(gpiod);
+				goto out_error_clock_enabled;
+			} else {
+				drv_data->cs_gpiods[i] = gpiod;
+			}
+		}
+	}
+
 	tasklet_init(&drv_data->pump_transfers, pump_transfers,
 		     (unsigned long)drv_data);
 
-- 
2.13.2

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

      parent reply	other threads:[~2017-07-27 19:02 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-27 10:09 [PATCH v1] Revert "spi: pxa2xx: Only claim CS GPIOs when the slave device is created" Andy Shevchenko
     [not found] ` <20170727100954.46801-1-andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2017-07-27 10:15   ` Mark Brown
2017-07-27 19:02   ` Mark Brown [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1dao3Q-0006Yz-PL@debutante \
    --to=broonie-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
    --cc=andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
    --cc=jan.kiszka-kv7WeFo6aLtBDgjK7y7TUQ@public.gmane.org \
    --cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mika.westerberg-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox