linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Pratyush Yadav <p.yadav@ti.com>
Cc: Mark Brown <broonie@kernel.org>, Nishanth Menon <nm@ti.com>,
	Michael Walle <michael@walle.cc>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	Tudor Ambarus <tudor.ambarus@microchip.com>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-mtd@lists.infradead.org, linux-spi@vger.kernel.org
Subject: Re: [PATCH v2 2/3] spi: dt-bindings: cdns,qspi-nor: Move slave-specific properties out
Date: Mon, 8 Nov 2021 12:06:17 -0600	[thread overview]
Message-ID: <YYlnGfTw42nmg3sl@robh.at.kernel.org> (raw)
In-Reply-To: <20211028124518.17370-3-p.yadav@ti.com>

On Thu, Oct 28, 2021 at 06:15:17PM +0530, Pratyush Yadav wrote:
> The spi-slave-props.yaml schema contains slave-specific properties
> for SPI controllers that should be present in the slave node. Move
> slave-specific properties to a separate file and refer to it in
> spi-slave-props.yaml.

Other than s/slave/peripheral/, LGTM.

> 
> Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
> 
> ---
> 
> Changes in v2:
> - New in v2.
> 
>  .../spi/cdns,qspi-nor-slave-props.yaml        | 42 +++++++++++++++++++
>  .../bindings/spi/cdns,qspi-nor.yaml           | 33 ---------------
>  .../bindings/spi/spi-slave-props.yaml         |  2 +
>  3 files changed, 44 insertions(+), 33 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/spi/cdns,qspi-nor-slave-props.yaml
> 
> diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor-slave-props.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor-slave-props.yaml
> new file mode 100644
> index 000000000000..263382a5729a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor-slave-props.yaml
> @@ -0,0 +1,42 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/spi/cdns,qspi-nor-slave-props.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Slave-specific properties for the Cadence QSPI controller.
> +
> +description:
> +  See spi-slave-props.yaml for more info.
> +
> +maintainers:
> +  - Pratyush Yadav <p.yadav@ti.com>
> +
> +properties:
> +  # cdns,qspi-nor.yaml
> +  cdns,read-delay:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      Delay for read capture logic, in clock cycles.
> +
> +  cdns,tshsl-ns:
> +    description:
> +      Delay in nanoseconds for the length that the master mode chip select
> +      outputs are de-asserted between transactions.
> +
> +  cdns,tsd2d-ns:
> +    description:
> +      Delay in nanoseconds between one chip select being de-activated
> +      and the activation of another.
> +
> +  cdns,tchsh-ns:
> +    description:
> +      Delay in nanoseconds between last bit of current transaction and
> +      deasserting the device chip select (qspi_n_ss_out).
> +
> +  cdns,tslch-ns:
> +    description:
> +      Delay in nanoseconds between setting qspi_n_ss_out low and
> +      first bit transfer.
> +
> +additionalProperties: true
> diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
> index ca155abbda7a..a439e3ed753f 100644
> --- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
> +++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
> @@ -86,39 +86,6 @@ properties:
>      items:
>        enum: [ qspi, qspi-ocp ]
>  
> -# subnode's properties
> -patternProperties:
> -  "@[0-9a-f]+$":
> -    type: object
> -    description:
> -      Flash device uses the below defined properties in the subnode.
> -
> -    properties:
> -      cdns,read-delay:
> -        $ref: /schemas/types.yaml#/definitions/uint32
> -        description:
> -          Delay for read capture logic, in clock cycles.
> -
> -      cdns,tshsl-ns:
> -        description:
> -          Delay in nanoseconds for the length that the master mode chip select
> -          outputs are de-asserted between transactions.
> -
> -      cdns,tsd2d-ns:
> -        description:
> -          Delay in nanoseconds between one chip select being de-activated
> -          and the activation of another.
> -
> -      cdns,tchsh-ns:
> -        description:
> -          Delay in nanoseconds between last bit of current transaction and
> -          deasserting the device chip select (qspi_n_ss_out).
> -
> -      cdns,tslch-ns:
> -        description:
> -          Delay in nanoseconds between setting qspi_n_ss_out low and
> -          first bit transfer.
> -
>  required:
>    - compatible
>    - reg
> diff --git a/Documentation/devicetree/bindings/spi/spi-slave-props.yaml b/Documentation/devicetree/bindings/spi/spi-slave-props.yaml
> index 5166ec9b0353..4cc12a161da9 100644
> --- a/Documentation/devicetree/bindings/spi/spi-slave-props.yaml
> +++ b/Documentation/devicetree/bindings/spi/spi-slave-props.yaml
> @@ -87,5 +87,7 @@ properties:
>        Delay, in microseconds, after a write transfer.
>  
>  # The controller specific properties go here.
> +allOf:
> +  - $ref: cdns,qspi-nor-slave-props.yaml#
>  
>  additionalProperties: true
> -- 
> 2.33.1.835.ge9e5ba39a7
> 
> 

  reply	other threads:[~2021-11-08 18:06 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-28 12:45 [PATCH v2 0/3] Add bindings for slave-specific SPI controller properties Pratyush Yadav
2021-10-28 12:45 ` [PATCH v2 1/3] spi: dt-bindings: add schema listing slave-specific properties Pratyush Yadav
2021-11-08 18:04   ` Rob Herring
2021-11-08 18:21     ` Rob Herring
2021-10-28 12:45 ` [PATCH v2 2/3] spi: dt-bindings: cdns,qspi-nor: Move slave-specific properties out Pratyush Yadav
2021-11-08 18:06   ` Rob Herring [this message]
2021-10-28 12:45 ` [PATCH v2 3/3] dt-bindings: mtd: spi-nor: Add a reference to spi-slave-props.yaml Pratyush Yadav

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YYlnGfTw42nmg3sl@robh.at.kernel.org \
    --to=robh@kernel.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=michael@walle.cc \
    --cc=miquel.raynal@bootlin.com \
    --cc=nm@ti.com \
    --cc=p.yadav@ti.com \
    --cc=richard@nod.at \
    --cc=tudor.ambarus@microchip.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).