Re: [PATCH 02/10] dt-bindings: spi: Add Aspeed SMC controllers device tree binding

[Rob Herring <robh@kernel.org>]

On Mon, Feb 14, 2022 at 10:42:23AM +0100, Cédric Le Goater wrote:
> The "interrupt" property is optional because it is only necessary for
> controllers supporting DMAs (Not implemented yet in the new driver).
> 
> Cc: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
> Signed-off-by: Cédric Le Goater <clg@kaod.org>
> ---
>  .../bindings/spi/aspeed,ast2600-fmc.yaml      | 92 +++++++++++++++++++
>  1 file changed, 92 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml b/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml
> new file mode 100644
> index 000000000000..ed71c4d86930
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml
> @@ -0,0 +1,92 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/spi/aspeed,ast2600-fmc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Aspeed SMC controllers bindings
> +
> +maintainers:
> +  - Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
> +  - Cédric Le Goater <clg@kaod.org>
> +
> +description: |
> +  This binding describes the Aspeed Static Memory Controllers (FMC and
> +  SPI) of the AST2400, AST2500 and AST2600 SOCs.
> +
> +allOf:
> +  - $ref: "spi-controller.yaml#"
> +
> +properties:
> +  compatible:
> +    enum:
> +      - aspeed,ast2600-fmc
> +      - aspeed,ast2600-spi
> +      - aspeed,ast2500-fmc
> +      - aspeed,ast2500-spi
> +      - aspeed,ast2400-fmc
> +      - aspeed,ast2400-spi
> +
> +  reg:
> +    items:
> +      - description: registers
> +      - description: memory mapping
> +
> +  clocks:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +patternProperties:
> +  "@[0-9a-f]+":
> +    type: object
> +
> +    properties:
> +      spi-rx-bus-width:
> +        enum: [1, 2, 4]
> +
> +    required:
> +      - reg
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
> +    #include <dt-bindings/clock/ast2600-clock.h>
> +
> +    spi@1e620000 {
> +        reg = < 0x1e620000 0xc4
> +                0x20000000 0x10000000 >;
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        compatible = "aspeed,ast2600-fmc";
> +        clocks = <&syscon ASPEED_CLK_AHB>;
> +        status = "disabled";

Why is your example disabled? Drop 'status'.

> +        interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
> +        flash@0 {
> +                reg = < 0 >;
> +                compatible = "jedec,spi-nor";
> +                spi-max-frequency = <50000000>;
> +                status = "disabled";

Ditto.

> +        };
> +        flash@1 {
> +                reg = < 1 >;
> +                compatible = "jedec,spi-nor";
> +                spi-max-frequency = <50000000>;
> +                status = "disabled";
> +        };
> +        flash@2 {
> +                reg = < 2 >;
> +                compatible = "jedec,spi-nor";
> +                spi-max-frequency = <50000000>;
> +                status = "disabled";
> +        };
> +    };
> -- 
> 2.34.1
> 
>