Re: [PATCH v3 15/17] spi: spi-qcom-qspi: Use OPP API to set clk/perf state

[Rajendra Nayak <rnayak@codeaurora.org>]

On 4/29/2020 6:19 AM, Matthias Kaehlcke wrote:
> Hi,
> 
> On Tue, Apr 28, 2020 at 07:03:03PM +0530, Rajendra Nayak wrote:
>> QSPI needs to vote on a performance state of a power domain depending on
>> the clock rate. Add support for it by specifying the perf state/clock rate
>> as an OPP table in device tree.
>>
>> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
>> Cc: Mark Brown <broonie@kernel.org>
>> Cc: Alok Chauhan <alokc@codeaurora.org>
>> Cc: Akash Asthana <akashast@codeaurora.org>
>> Cc: linux-spi@vger.kernel.org
>> ---
>>   drivers/spi/spi-qcom-qspi.c | 29 ++++++++++++++++++++++++++++-
>>   1 file changed, 28 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/spi/spi-qcom-qspi.c b/drivers/spi/spi-qcom-qspi.c
>> index 3c4f83b..724a658 100644
>> --- a/drivers/spi/spi-qcom-qspi.c
>> +++ b/drivers/spi/spi-qcom-qspi.c
>> @@ -8,6 +8,7 @@
>>   #include <linux/of.h>
>>   #include <linux/of_platform.h>
>>   #include <linux/pm_runtime.h>
>> +#include <linux/pm_opp.h>
>>   #include <linux/spi/spi.h>
>>   #include <linux/spi/spi-mem.h>
>>   
>> @@ -139,6 +140,8 @@ struct qcom_qspi {
>>   	struct device *dev;
>>   	struct clk_bulk_data *clks;
>>   	struct qspi_xfer xfer;
>> +	struct opp_table *opp_table;
>> +	bool has_opp_table;
>>   	/* Lock to protect xfer and IRQ accessed registers */
>>   	spinlock_t lock;
>>   };
>> @@ -235,7 +238,7 @@ static int qcom_qspi_transfer_one(struct spi_master *master,
>>   		speed_hz = xfer->speed_hz;
>>   
>>   	/* In regular operation (SBL_EN=1) core must be 4x transfer clock */
>> -	ret = clk_set_rate(ctrl->clks[QSPI_CLK_CORE].clk, speed_hz * 4);
>> +	ret = dev_pm_opp_set_rate(ctrl->dev, speed_hz * 4);
>>   	if (ret) {
>>   		dev_err(ctrl->dev, "Failed to set core clk %d\n", ret);
>>   		return ret;
>> @@ -481,6 +484,20 @@ static int qcom_qspi_probe(struct platform_device *pdev)
>>   	master->handle_err = qcom_qspi_handle_err;
>>   	master->auto_runtime_pm = true;
>>   
>> +	ctrl->opp_table = dev_pm_opp_set_clkname(&pdev->dev, "core");
>> +	if (IS_ERR(ctrl->opp_table)) {
>> +		ret = PTR_ERR(ctrl->opp_table);
>> +		goto exit_probe_master_put;
>> +	}
>> +	/* OPP table is optional */
>> +	ret = dev_pm_opp_of_add_table(&pdev->dev);
>> +	if (!ret) {
>> +		ctrl->has_opp_table = true;
>> +	} else if (ret != -ENODEV) {
>> +		dev_err(&pdev->dev, "Invalid OPP table in Device tree\n");
>> +		return ret;
> 
> 		goto exit_probe_master_put;

thanks for catching this. will fix and respin.


-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation