From: Heiner Kallweit <hkallweit1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: "linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: [PATCH 4/4] spi: fsl-espi: improve and extend register bit definitions
Date: Tue, 13 Sep 2016 23:16:06 +0200 [thread overview]
Message-ID: <e510529b-8db6-a878-84c3-90ad07d39fbf@gmail.com> (raw)
In-Reply-To: <848f06e1-3cb9-bef1-bb41-455fa72822b1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Add definition of further register bits for use in upcoming
driver extensions and improve current bit definitions:
- use BIT macro
- use bit names as in the chip spec
Signed-off-by: Heiner Kallweit <hkallweit1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
drivers/spi/spi-fsl-espi.c | 52 +++++++++++++++++++++++++++++-----------------
1 file changed, 33 insertions(+), 19 deletions(-)
diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c
index 328b04a..a7984ae 100644
--- a/drivers/spi/spi-fsl-espi.c
+++ b/drivers/spi/spi-fsl-espi.c
@@ -37,18 +37,18 @@
#define ESPI_SPMODEx(x) (ESPI_SPMODE0 + (x) * 4)
/* eSPI Controller mode register definitions */
-#define SPMODE_ENABLE (1 << 31)
-#define SPMODE_LOOP (1 << 30)
+#define SPMODE_ENABLE BIT(31)
+#define SPMODE_LOOP BIT(30)
#define SPMODE_TXTHR(x) ((x) << 8)
#define SPMODE_RXTHR(x) ((x) << 0)
/* eSPI Controller CS mode register definitions */
-#define CSMODE_CI_INACTIVEHIGH (1 << 31)
-#define CSMODE_CP_BEGIN_EDGECLK (1 << 30)
-#define CSMODE_REV (1 << 29)
-#define CSMODE_DIV16 (1 << 28)
+#define CSMODE_CI_INACTIVEHIGH BIT(31)
+#define CSMODE_CP_BEGIN_EDGECLK BIT(30)
+#define CSMODE_REV BIT(29)
+#define CSMODE_DIV16 BIT(28)
#define CSMODE_PM(x) ((x) << 24)
-#define CSMODE_POL_1 (1 << 20)
+#define CSMODE_POL_1 BIT(20)
#define CSMODE_LEN(x) ((x) << 16)
#define CSMODE_BEF(x) ((x) << 12)
#define CSMODE_AFT(x) ((x) << 8)
@@ -60,18 +60,32 @@
| CSMODE_AFT(0) | CSMODE_CG(1))
/* SPIE register values */
-#define SPIE_NE 0x00000200 /* Not empty */
-#define SPIE_NF 0x00000100 /* Not full */
-
-/* SPIM register values */
-#define SPIM_NE 0x00000200 /* Not empty */
-#define SPIM_NF 0x00000100 /* Not full */
#define SPIE_RXCNT(reg) ((reg >> 24) & 0x3F)
#define SPIE_TXCNT(reg) ((reg >> 16) & 0x3F)
+#define SPIE_TXE BIT(15) /* TX FIFO empty */
+#define SPIE_DON BIT(14) /* TX done */
+#define SPIE_RXT BIT(13) /* RX FIFO threshold */
+#define SPIE_RXF BIT(12) /* RX FIFO full */
+#define SPIE_TXT BIT(11) /* TX FIFO threshold*/
+#define SPIE_RNE BIT(9) /* RX FIFO not empty */
+#define SPIE_TNF BIT(8) /* TX FIFO not full */
+
+/* SPIM register values */
+#define SPIM_TXE BIT(15) /* TX FIFO empty */
+#define SPIM_DON BIT(14) /* TX done */
+#define SPIM_RXT BIT(13) /* RX FIFO threshold */
+#define SPIM_RXF BIT(12) /* RX FIFO full */
+#define SPIM_TXT BIT(11) /* TX FIFO threshold*/
+#define SPIM_RNE BIT(9) /* RX FIFO not empty */
+#define SPIM_TNF BIT(8) /* TX FIFO not full */
/* SPCOM register values */
#define SPCOM_CS(x) ((x) << 30)
+#define SPCOM_DO BIT(28) /* Dual output */
+#define SPCOM_TO BIT(27) /* TX only */
+#define SPCOM_RXSKIP(x) ((x) << 16)
#define SPCOM_TRANLEN(x) ((x) << 0)
+
#define SPCOM_TRANLEN_MAX 0x10000 /* Max transaction length */
#define AUTOSUSPEND_TIMEOUT 2000
@@ -263,7 +277,7 @@ static int fsl_espi_bufs(struct spi_device *spi, struct spi_transfer *t)
(SPCOM_CS(spi->chip_select) | SPCOM_TRANLEN(t->len - 1)));
/* enable rx ints */
- fsl_espi_write_reg(mpc8xxx_spi, ESPI_SPIM, SPIM_NE);
+ fsl_espi_write_reg(mpc8xxx_spi, ESPI_SPIM, SPIM_RNE);
/* transmit word */
word = mpc8xxx_spi->get_tx(mpc8xxx_spi);
@@ -405,7 +419,7 @@ static void fsl_espi_cleanup(struct spi_device *spi)
static void fsl_espi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events)
{
/* We need handle RX first */
- if (events & SPIE_NE) {
+ if (events & SPIE_RNE) {
u32 rx_data, tmp;
u8 rx_data_8;
int rx_nr_bytes = 4;
@@ -427,7 +441,7 @@ static void fsl_espi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events)
rx_data = fsl_espi_read_reg(mspi, ESPI_SPIRF);
} else if (mspi->len <= 0) {
dev_err(mspi->dev,
- "unexpected RX(SPIE_NE) interrupt occurred,\n"
+ "unexpected RX(SPIE_RNE) interrupt occurred,\n"
"(local rxlen %d bytes, reg rxlen %d bytes)\n",
min(4, mspi->len), SPIE_RXCNT(events));
rx_nr_bytes = 0;
@@ -450,14 +464,14 @@ static void fsl_espi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events)
mspi->get_rx(rx_data, mspi);
}
- if (!(events & SPIE_NF)) {
+ if (!(events & SPIE_TNF)) {
int ret;
/* spin until TX is done */
ret = spin_event_timeout(((events = fsl_espi_read_reg(
- mspi, ESPI_SPIE)) & SPIE_NF), 1000, 0);
+ mspi, ESPI_SPIE)) & SPIE_TNF), 1000, 0);
if (!ret) {
- dev_err(mspi->dev, "tired waiting for SPIE_NF\n");
+ dev_err(mspi->dev, "tired waiting for SPIE_TNF\n");
complete(&mspi->done);
return;
}
--
2.9.2
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-09-13 21:16 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <848f06e1-3cb9-bef1-bb41-455fa72822b1@gmail.com>
[not found] ` <848f06e1-3cb9-bef1-bb41-455fa72822b1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-09-13 21:15 ` [PATCH 2/4] spi: fsl-espi: improve and simplify interrupt handler Heiner Kallweit
[not found] ` <5be7ab71-3401-0e9e-b374-d781afda98f1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-09-14 17:25 ` Applied "spi: fsl-espi: improve and simplify interrupt handler" to the spi tree Mark Brown
2016-09-13 21:16 ` [PATCH 3/4] spi: fsl-espi: align register access with other drivers Heiner Kallweit
[not found] ` <7d703c07-d2d9-e1e9-157c-030891bdc94c-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-09-14 17:25 ` Applied "spi: fsl-espi: align register access with other drivers" to the spi tree Mark Brown
2016-09-13 21:16 ` Heiner Kallweit [this message]
[not found] ` <e510529b-8db6-a878-84c3-90ad07d39fbf-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-09-14 17:25 ` Applied "spi: fsl-espi: improve and extend register bit definitions" " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e510529b-8db6-a878-84c3-90ad07d39fbf@gmail.com \
--to=hkallweit1-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).