* [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems
@ 2024-05-22 19:25 Eddie James
2024-05-22 19:25 ` [PATCH v6 01/20] spi: dt-bindings: Document the IBM FSI-attached SPI controller Eddie James
` (21 more replies)
0 siblings, 22 replies; 51+ messages in thread
From: Eddie James @ 2024-05-22 19:25 UTC (permalink / raw)
To: linux-fsi
Cc: eajames, devicetree, linux-kernel, ninad, lakshmiy, linux-i2c,
linux-spi, linux-aspeed, andrew, joel, robh, conor+dt, krzk+dt,
andi.shyti, broonie
Add the Blueridge and Fuji BMC systems. Document many missing FSI related
properties, and fix existing warnings. Make some minor fixes in OCC and
SCOM drivers for the updated bindings.
Changes since v5:
- Switch from clock-frequency to bus-frequency for common FSI controller
properties
- Add reg properties for AST2700 FSI controller
- Fix patternProperties for i2c bus nodes under FSI-based I2C controller
- Add bus-frequency for P11 FSI device tree node
- Change model name from Blueridge to Blueridge 2U
- Add missing reset gpio to led controller on Fuji
- Add Huygens (Rainier with modified FSI wiring)
Eddie James (20):
spi: dt-bindings: Document the IBM FSI-attached SPI controller
dt-bindings: fsi: fsi2spi: Document SPI controller child nodes
dt-bindings: fsi: Document the IBM SCOM engine
dt-bindings: fsi: p9-occ: Convert to json-schema
dt-bindings: fsi: Document the IBM SBEFIFO engine
dt-bindings: fsi: Document the FSI controller common properties
dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller
dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema
dt-bindings: fsi: Document the AST2700 FSI controller
dt-bindings: fsi: Document the FSI Hub Controller
dt-bindings: i2c: i2c-fsi: Convert to json-schema
dt-bindings: arm: aspeed: add IBM P11 BMC boards
ARM: dts: aspeed: Add IBM P11 FSI devices
ARM: dts: aspeed: Add IBM P11 Blueridge BMC system
ARM: dts: aspeed: Add IBM P11 Blueridge 4U BMC system
ARM: dts: aspeed: Add IBM P11 Fuji BMC system
ARM: dts: aspeed: Add IBM Huygens BMC system
fsi: occ: Get device number from FSI minor number API
fsi: occ: Find next available child rather than node name match
fsi: scom: Update compatible string to match documentation
.../bindings/arm/aspeed/aspeed.yaml | 2 +
.../fsi/aspeed,ast2600-fsi-master.yaml | 121 +
.../bindings/fsi/fsi-controller.yaml | 66 +
.../bindings/fsi/fsi-master-aspeed.txt | 36 -
.../devicetree/bindings/fsi/ibm,fsi2spi.yaml | 36 +-
.../bindings/fsi/ibm,i2cr-fsi-master.yaml | 5 +-
.../bindings/fsi/ibm,p9-fsi-controller.yaml | 45 +
.../devicetree/bindings/fsi/ibm,p9-occ.txt | 16 -
.../devicetree/bindings/fsi/ibm,p9-occ.yaml | 40 +
.../bindings/fsi/ibm,p9-sbefifo.yaml | 46 +
.../devicetree/bindings/fsi/ibm,p9-scom.yaml | 37 +
.../devicetree/bindings/i2c/i2c-fsi.txt | 40 -
.../devicetree/bindings/i2c/ibm,i2c-fsi.yaml | 76 +
.../devicetree/bindings/spi/ibm,spi-fsi.yaml | 55 +
MAINTAINERS | 2 +-
arch/arm/boot/dts/aspeed/Makefile | 3 +
.../aspeed/aspeed-bmc-ibm-blueridge-4u.dts | 21 +
.../dts/aspeed/aspeed-bmc-ibm-blueridge.dts | 1691 +++++++
.../boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts | 3881 +++++++++++++++++
.../dts/aspeed/aspeed-bmc-ibm-huygens.dts | 23 +
.../arm/boot/dts/aspeed/ibm-power11-quad.dtsi | 1539 +++++++
drivers/fsi/fsi-occ.c | 49 +-
drivers/fsi/fsi-scom.c | 1 +
23 files changed, 7694 insertions(+), 137 deletions(-)
create mode 100644 Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml
create mode 100644 Documentation/devicetree/bindings/fsi/fsi-controller.yaml
delete mode 100644 Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-fsi-controller.yaml
delete mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml
create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.yaml
create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-scom.yaml
delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-fsi.txt
create mode 100644 Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml
create mode 100644 Documentation/devicetree/bindings/spi/ibm,spi-fsi.yaml
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge-4u.dts
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-huygens.dts
create mode 100644 arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi
--
2.39.3
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH v6 01/20] spi: dt-bindings: Document the IBM FSI-attached SPI controller
2024-05-22 19:25 [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems Eddie James
@ 2024-05-22 19:25 ` Eddie James
2024-05-22 19:25 ` [PATCH v6 02/20] dt-bindings: fsi: fsi2spi: Document SPI controller child nodes Eddie James
` (20 subsequent siblings)
21 siblings, 0 replies; 51+ messages in thread
From: Eddie James @ 2024-05-22 19:25 UTC (permalink / raw)
To: linux-fsi
Cc: eajames, devicetree, linux-kernel, ninad, lakshmiy, linux-i2c,
linux-spi, linux-aspeed, andrew, joel, robh, conor+dt, krzk+dt,
andi.shyti, broonie
IBM Power processors have a SPI controller that can be accessed
over FSI from a service processor. Document it.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../devicetree/bindings/spi/ibm,spi-fsi.yaml | 55 +++++++++++++++++++
1 file changed, 55 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/ibm,spi-fsi.yaml
diff --git a/Documentation/devicetree/bindings/spi/ibm,spi-fsi.yaml b/Documentation/devicetree/bindings/spi/ibm,spi-fsi.yaml
new file mode 100644
index 0000000000000..d7fec4c3a8016
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/ibm,spi-fsi.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/ibm,spi-fsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached SPI Controller
+
+maintainers:
+ - Eddie James <eajames@linux.ibm.com>
+
+description:
+ A SPI controller found on IBM Power processors, accessed over FSI from a
+ service processor. This node will always be a child node of an ibm,fsi2spi
+ node.
+
+properties:
+ compatible:
+ enum:
+ - ibm,spi-fsi
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: spi-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ fsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ spi@0 {
+ compatible = "ibm,spi-fsi";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ size = <0x80000>;
+ address-width = <24>;
+ pagesize = <256>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+ };
--
2.39.3
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH v6 02/20] dt-bindings: fsi: fsi2spi: Document SPI controller child nodes
2024-05-22 19:25 [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems Eddie James
2024-05-22 19:25 ` [PATCH v6 01/20] spi: dt-bindings: Document the IBM FSI-attached SPI controller Eddie James
@ 2024-05-22 19:25 ` Eddie James
2024-05-22 19:25 ` [PATCH v6 03/20] dt-bindings: fsi: Document the IBM SCOM engine Eddie James
` (19 subsequent siblings)
21 siblings, 0 replies; 51+ messages in thread
From: Eddie James @ 2024-05-22 19:25 UTC (permalink / raw)
To: linux-fsi
Cc: eajames, devicetree, linux-kernel, ninad, lakshmiy, linux-i2c,
linux-spi, linux-aspeed, andrew, joel, robh, conor+dt, krzk+dt,
andi.shyti, broonie
The FSI2SPI bridge has several SPI controllers behind it, which
should be documented. Also, therefore the node needs to specify
address and size cells.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../devicetree/bindings/fsi/ibm,fsi2spi.yaml | 36 ++++++++++++++++---
1 file changed, 32 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml
index e2ca0b0004714..ad5c83f484255 100644
--- a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml
+++ b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml
@@ -9,11 +9,10 @@ title: IBM FSI-attached SPI controllers
maintainers:
- Eddie James <eajames@linux.ibm.com>
-description: |
+description:
This binding describes an FSI CFAM engine called the FSI2SPI. Therefore this
- node will always be a child of an FSI CFAM node; see fsi.txt for details on
- FSI slave and CFAM nodes. This FSI2SPI engine provides access to a number of
- SPI controllers.
+ node will always be a child of an FSI CFAM node. This FSI2SPI engine provides
+ access to a number of SPI controllers.
properties:
compatible:
@@ -24,6 +23,17 @@ properties:
items:
- description: FSI slave address
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^spi@[0-9a-f]+$":
+ type: object
+ $ref: /schemas/spi/ibm,spi-fsi.yaml
+
required:
- compatible
- reg
@@ -35,4 +45,22 @@ examples:
fsi2spi@1c00 {
compatible = "ibm,fsi2spi";
reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ spi@0 {
+ compatible = "ibm,spi-fsi";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
};
--
2.39.3
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH v6 03/20] dt-bindings: fsi: Document the IBM SCOM engine
2024-05-22 19:25 [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems Eddie James
2024-05-22 19:25 ` [PATCH v6 01/20] spi: dt-bindings: Document the IBM FSI-attached SPI controller Eddie James
2024-05-22 19:25 ` [PATCH v6 02/20] dt-bindings: fsi: fsi2spi: Document SPI controller child nodes Eddie James
@ 2024-05-22 19:25 ` Eddie James
2024-05-23 9:28 ` Markus Elfring
2024-05-22 19:25 ` [PATCH v6 04/20] dt-bindings: fsi: p9-occ: Convert to json-schema Eddie James
` (18 subsequent siblings)
21 siblings, 1 reply; 51+ messages in thread
From: Eddie James @ 2024-05-22 19:25 UTC (permalink / raw)
To: linux-fsi
Cc: eajames, devicetree, linux-kernel, ninad, lakshmiy, linux-i2c,
linux-spi, linux-aspeed, andrew, joel, robh, conor+dt, krzk+dt,
andi.shyti, broonie
The SCOM engine provides an interface to the POWER processor PIB
(Pervasive Interconnect Bus).
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../devicetree/bindings/fsi/ibm,p9-scom.yaml | 37 +++++++++++++++++++
1 file changed, 37 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-scom.yaml
diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-scom.yaml b/Documentation/devicetree/bindings/fsi/ibm,p9-scom.yaml
new file mode 100644
index 0000000000000..8cd14a70bedf9
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/ibm,p9-scom.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,p9-scom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached SCOM engine
+
+maintainers:
+ - Eddie James <eajames@linux.ibm.com>
+
+description:
+ The SCOM engine is an interface to the POWER processor PIB (Pervasive
+ Interconnect Bus). This node will always be a child of an FSI CFAM node.
+
+properties:
+ compatible:
+ enum:
+ - ibm,p9-scom
+ - ibm,i2cr-scom
+
+ reg:
+ items:
+ - description: FSI slave address
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ scom@1000 {
+ compatible = "ibm,p9-scom";
+ reg = <0x1000 0x400>;
+ };
--
2.39.3
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH v6 04/20] dt-bindings: fsi: p9-occ: Convert to json-schema
2024-05-22 19:25 [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems Eddie James
` (2 preceding siblings ...)
2024-05-22 19:25 ` [PATCH v6 03/20] dt-bindings: fsi: Document the IBM SCOM engine Eddie James
@ 2024-05-22 19:25 ` Eddie James
2024-05-23 15:37 ` Markus Elfring
2024-05-22 19:25 ` [PATCH v6 05/20] dt-bindings: fsi: Document the IBM SBEFIFO engine Eddie James
` (17 subsequent siblings)
21 siblings, 1 reply; 51+ messages in thread
From: Eddie James @ 2024-05-22 19:25 UTC (permalink / raw)
To: linux-fsi
Cc: eajames, devicetree, linux-kernel, ninad, lakshmiy, linux-i2c,
linux-spi, linux-aspeed, andrew, joel, robh, conor+dt, krzk+dt,
andi.shyti, broonie
Conver to json-schema for the OCC documentation. Also document the fact
that the OCC "bridge" device will often have the hwmon node as a
child.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../devicetree/bindings/fsi/ibm,p9-occ.txt | 16 --------
.../devicetree/bindings/fsi/ibm,p9-occ.yaml | 40 +++++++++++++++++++
2 files changed, 40 insertions(+), 16 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml
diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
deleted file mode 100644
index e73358075a903..0000000000000
--- a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Device-tree bindings for FSI-attached POWER9/POWER10 On-Chip Controller (OCC)
------------------------------------------------------------------------------
-
-This is the binding for the P9 or P10 On-Chip Controller accessed over FSI from
-a service processor. See fsi.txt for details on bindings for FSI slave and CFAM
-nodes. The OCC is not an FSI slave device itself, rather it is accessed
-through the SBE FIFO.
-
-Required properties:
- - compatible = "ibm,p9-occ" or "ibm,p10-occ"
-
-Examples:
-
- occ {
- compatible = "ibm,p9-occ";
- };
diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml
new file mode 100644
index 0000000000000..537eac70447c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,p9-occ.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached On-Chip Controller (OCC)
+
+maintainers:
+ - Eddie James <eajames@linux.ibm.com>
+
+description:
+ The POWER processor On-Chip Controller (OCC) helps manage power and
+ thermals for the system, accessed through the FSI-attached SBEFIFO
+ from a service processor.
+
+properties:
+ compatible:
+ enum:
+ - ibm,p9-occ
+ - ibm,p10-occ
+
+ hwmon:
+ type: object
+ $ref: /schemas/hwmon/ibm,occ-hwmon.yaml
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ occ {
+ compatible = "ibm,p9-occ";
+
+ hwmon {
+ compatible = "ibm,p9-occ-hwmon";
+ };
+ };
--
2.39.3
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH v6 05/20] dt-bindings: fsi: Document the IBM SBEFIFO engine
2024-05-22 19:25 [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems Eddie James
` (3 preceding siblings ...)
2024-05-22 19:25 ` [PATCH v6 04/20] dt-bindings: fsi: p9-occ: Convert to json-schema Eddie James
@ 2024-05-22 19:25 ` Eddie James
2024-05-23 15:55 ` Markus Elfring
2024-05-22 19:25 ` [PATCH v6 06/20] dt-bindings: fsi: Document the FSI controller common properties Eddie James
` (16 subsequent siblings)
21 siblings, 1 reply; 51+ messages in thread
From: Eddie James @ 2024-05-22 19:25 UTC (permalink / raw)
To: linux-fsi
Cc: eajames, devicetree, linux-kernel, ninad, lakshmiy, linux-i2c,
linux-spi, linux-aspeed, andrew, joel, robh, conor+dt, krzk+dt,
andi.shyti, broonie
The SBEFIFO engine provides an interface to the POWER processor
Self Boot Engine (SBE).
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
---
.../bindings/fsi/ibm,p9-sbefifo.yaml | 46 +++++++++++++++++++
1 file changed, 46 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.yaml
diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.yaml b/Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.yaml
new file mode 100644
index 0000000000000..3cd966fb3c0df
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,p9-sbefifo.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached SBEFIFO engine
+
+maintainers:
+ - Eddie James <eajames@linux.ibm.com>
+
+description:
+ The SBEFIFO is an FSI CFAM engine that provides an interface to the
+ POWER processor Self Boot Engine (SBE). This node will always be a child
+ of an FSI CFAM node.
+
+properties:
+ compatible:
+ enum:
+ - ibm,p9-sbefifo
+ - ibm,odyssey-sbefifo
+
+ reg:
+ items:
+ - description: FSI slave address
+
+ occ:
+ type: object
+ $ref: ibm,p9-occ.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ fsi-slave-engine@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+
+ occ {
+ compatible = "ibm,p9-occ";
+ };
+ };
--
2.39.3
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH v6 06/20] dt-bindings: fsi: Document the FSI controller common properties
2024-05-22 19:25 [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems Eddie James
` (4 preceding siblings ...)
2024-05-22 19:25 ` [PATCH v6 05/20] dt-bindings: fsi: Document the IBM SBEFIFO engine Eddie James
@ 2024-05-22 19:25 ` Eddie James
2024-05-23 6:57 ` Krzysztof Kozlowski
2024-05-22 19:25 ` [PATCH v6 07/20] dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller Eddie James
` (15 subsequent siblings)
21 siblings, 1 reply; 51+ messages in thread
From: Eddie James @ 2024-05-22 19:25 UTC (permalink / raw)
To: linux-fsi
Cc: eajames, devicetree, linux-kernel, ninad, lakshmiy, linux-i2c,
linux-spi, linux-aspeed, andrew, joel, robh, conor+dt, krzk+dt,
andi.shyti, broonie
Since there are multiple FSI controllers documented, the common
properties should be documented separately and then referenced
from the specific controller documentation. Add bus-frequency for
the FSI bus and CFAM local bus frequencies. Add interrupt
controller properties.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
Changes since v5:
- Switch from clock-frequency to bus-frequency
.../bindings/fsi/fsi-controller.yaml | 66 +++++++++++++++++++
1 file changed, 66 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fsi/fsi-controller.yaml
diff --git a/Documentation/devicetree/bindings/fsi/fsi-controller.yaml b/Documentation/devicetree/bindings/fsi/fsi-controller.yaml
new file mode 100644
index 0000000000000..ffe191921b268
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/fsi-controller.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/fsi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FSI Controller Common Properties
+
+maintainers:
+ - Eddie James <eajames@linux.ibm.com>
+
+description:
+ FSI (FRU (Field Replaceable Unit) Service Interface) is a two wire bus. The
+ FSI bus is connected to a CFAM (Common FRU Access Macro) which contains
+ various engines such as I2C controllers, SPI controllers, etc.
+
+properties:
+ "#address-cells":
+ const: 2
+
+ "#size-cells":
+ const: 0
+
+ '#interrupt-cells':
+ const: 1
+
+ bus-frequency:
+ minimum: 1
+ maximum: 200000000
+
+ interrupt-controller: true
+
+ no-scan-on-init:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ The FSI controller cannot scan the bus during initialization.
+
+patternProperties:
+ "cfam@[0-9a-f],[0-9a-f]":
+ type: object
+ properties:
+ chip-id:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Processor index, a global unique chip ID which is used to identify
+ the physical location of the chip in a system specific way.
+
+ bus-frequency:
+ minimum: 1
+ maximum: 100000000
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ required:
+ - reg
+
+ additionalProperties: true
+
+additionalProperties: true
--
2.39.3
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH v6 07/20] dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller
2024-05-22 19:25 [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems Eddie James
` (5 preceding siblings ...)
2024-05-22 19:25 ` [PATCH v6 06/20] dt-bindings: fsi: Document the FSI controller common properties Eddie James
@ 2024-05-22 19:25 ` Eddie James
2024-05-22 19:25 ` [PATCH v6 08/20] dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema Eddie James
` (14 subsequent siblings)
21 siblings, 0 replies; 51+ messages in thread
From: Eddie James @ 2024-05-22 19:25 UTC (permalink / raw)
To: linux-fsi
Cc: eajames, devicetree, linux-kernel, ninad, lakshmiy, linux-i2c,
linux-spi, linux-aspeed, andrew, joel, robh, conor+dt, krzk+dt,
andi.shyti, broonie
Remove the common properties from the I2CR documentation and instead
point to the common FSI controller documentation.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml b/Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml
index 442cecdc57cb1..e49ace3ca339f 100644
--- a/Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml
+++ b/Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml
@@ -26,7 +26,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: fsi-controller.yaml#
+
+unevaluatedProperties: false
examples:
- |
--
2.39.3
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH v6 08/20] dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema
2024-05-22 19:25 [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems Eddie James
` (6 preceding siblings ...)
2024-05-22 19:25 ` [PATCH v6 07/20] dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller Eddie James
@ 2024-05-22 19:25 ` Eddie James
2024-05-22 19:25 ` [PATCH v6 09/20] dt-bindings: fsi: Document the AST2700 FSI controller Eddie James
` (13 subsequent siblings)
21 siblings, 0 replies; 51+ messages in thread
From: Eddie James @ 2024-05-22 19:25 UTC (permalink / raw)
To: linux-fsi
Cc: eajames, devicetree, linux-kernel, ninad, lakshmiy, linux-i2c,
linux-spi, linux-aspeed, andrew, joel, robh, conor+dt, krzk+dt,
andi.shyti, broonie
Convert to json-schema for the AST2600 FSI master documentation.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../fsi/aspeed,ast2600-fsi-master.yaml | 80 +++++++++++++++++++
.../bindings/fsi/fsi-master-aspeed.txt | 36 ---------
2 files changed, 80 insertions(+), 36 deletions(-)
create mode 100644 Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml
delete mode 100644 Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
diff --git a/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml b/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml
new file mode 100644
index 0000000000000..2f531c47994bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed FSI master
+
+maintainers:
+ - Eddie James <eajames@linux.ibm.com>
+
+description:
+ The AST2600 and later contain two identical FSI masters. They share a
+ clock and have a separate interrupt line and output pins.
+
+properties:
+ compatible:
+ enum:
+ - aspeed,ast2600-fsi-master
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ cfam-reset-gpios:
+ maxItems: 1
+ description:
+ Output GPIO pin for CFAM reset
+
+ fsi-routing-gpios:
+ maxItems: 1
+ description:
+ Output GPIO pin for setting the FSI mux (internal or cabled)
+
+ fsi-mux-gpios:
+ maxItems: 1
+ description:
+ Input GPIO pin for detecting the desired FSI mux state
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+allOf:
+ - $ref: fsi-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/ast2600-clock.h>
+ #include <dt-bindings/gpio/aspeed-gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ fsi-master@1e79b000 {
+ compatible = "aspeed,ast2600-fsi-master";
+ reg = <0x1e79b000 0x94>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fsi1_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+ fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
+ fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
+ cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt b/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
deleted file mode 100644
index 9853fefff5d83..0000000000000
--- a/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Device-tree bindings for AST2600 FSI master
--------------------------------------------
-
-The AST2600 contains two identical FSI masters. They share a clock and have a
-separate interrupt line and output pins.
-
-Required properties:
- - compatible: "aspeed,ast2600-fsi-master"
- - reg: base address and length
- - clocks: phandle and clock number
- - interrupts: platform dependent interrupt description
- - pinctrl-0: phandle to pinctrl node
- - pinctrl-names: pinctrl state
-
-Optional properties:
- - cfam-reset-gpios: GPIO for CFAM reset
-
- - fsi-routing-gpios: GPIO for setting the FSI mux (internal or cabled)
- - fsi-mux-gpios: GPIO for detecting the desired FSI mux state
-
-
-Examples:
-
- fsi-master {
- compatible = "aspeed,ast2600-fsi-master", "fsi-master";
- reg = <0x1e79b000 0x94>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fsi1_default>;
- clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
-
- fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
- fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
-
- cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
- };
--
2.39.3
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH v6 09/20] dt-bindings: fsi: Document the AST2700 FSI controller
2024-05-22 19:25 [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems Eddie James
` (7 preceding siblings ...)
2024-05-22 19:25 ` [PATCH v6 08/20] dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema Eddie James
@ 2024-05-22 19:25 ` Eddie James
2024-05-22 19:25 ` [PATCH v6 10/20] dt-bindings: fsi: Document the FSI Hub Controller Eddie James
` (12 subsequent siblings)
21 siblings, 0 replies; 51+ messages in thread
From: Eddie James @ 2024-05-22 19:25 UTC (permalink / raw)
To: linux-fsi
Cc: eajames, devicetree, linux-kernel, ninad, lakshmiy, linux-i2c,
linux-spi, linux-aspeed, andrew, joel, robh, conor+dt, krzk+dt,
andi.shyti, broonie
Add the appropriate compatible string, and document the new reg
properties of the AST2700 FSI controller, which can directly access
the FSI controller registers as well as the FSI link address space.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes since v5:
- Add the AST2700-specific regs properties since that controller can
map the FSI control registers and FSI link space.
.../fsi/aspeed,ast2600-fsi-master.yaml | 47 +++++++++++++++++--
1 file changed, 44 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml b/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml
index 2f531c47994bc..dfcc2fafa68dc 100644
--- a/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml
+++ b/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml
@@ -17,9 +17,7 @@ properties:
compatible:
enum:
- aspeed,ast2600-fsi-master
-
- reg:
- maxItems: 1
+ - aspeed,ast2700-fsi-master
clocks:
maxItems: 1
@@ -42,6 +40,30 @@ properties:
interrupts:
maxItems: 1
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - aspeed,ast2600-fsi-master
+then:
+ properties:
+ reg:
+ maxItems: 1
+else:
+ properties:
+ reg:
+ minItems: 1
+ items:
+ - description: OPB control registers
+ - description: FSI controller registers
+ - description: FSI link address space
+ reg-names:
+ items:
+ - const: opb
+ - const: ctrl
+ - const: fsi
+
required:
- compatible
- reg
@@ -78,3 +100,22 @@ examples:
chip-id = <0>;
};
};
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ fsi-master@21800000 {
+ compatible = "aspeed,ast2700-fsi-master";
+ reg = <0x0 0x21800000 0x0 0x100>,
+ <0x0 0x21000000 0x0 0x1000>,
+ <0x0 0x20000000 0x0 0x1000000>;
+ reg-names = "opb", "ctrl", "fsi";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupts-extended = <&intc 6>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fsi0_default>;
+ clocks = <&syscon 40>;
+ };
+ };
--
2.39.3
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH v6 10/20] dt-bindings: fsi: Document the FSI Hub Controller
2024-05-22 19:25 [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems Eddie James
` (8 preceding siblings ...)
2024-05-22 19:25 ` [PATCH v6 09/20] dt-bindings: fsi: Document the AST2700 FSI controller Eddie James
@ 2024-05-22 19:25 ` Eddie James
2024-05-22 19:25 ` [PATCH v6 11/20] dt-bindings: i2c: i2c-fsi: Convert to json-schema Eddie James
` (11 subsequent siblings)
21 siblings, 0 replies; 51+ messages in thread
From: Eddie James @ 2024-05-22 19:25 UTC (permalink / raw)
To: linux-fsi
Cc: eajames, devicetree, linux-kernel, ninad, lakshmiy, linux-i2c,
linux-spi, linux-aspeed, andrew, joel, robh, conor+dt, krzk+dt,
andi.shyti, broonie
Document the FSI Hub Controller CFAM engine.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../bindings/fsi/ibm,p9-fsi-controller.yaml | 45 +++++++++++++++++++
1 file changed, 45 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-fsi-controller.yaml
diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-fsi-controller.yaml b/Documentation/devicetree/bindings/fsi/ibm,p9-fsi-controller.yaml
new file mode 100644
index 0000000000000..29ea80ff915ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/ibm,p9-fsi-controller.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,p9-fsi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached FSI Hub Controller
+
+maintainers:
+ - Eddie James <eajames@linux.ibm.com>
+
+description:
+ The FSI Hub Controller is an FSI controller, providing a number of FSI links,
+ located on a CFAM. Therefore this node will always be a child of an FSI CFAM
+ node.
+
+properties:
+ compatible:
+ enum:
+ - ibm,p9-fsi-controller
+
+ reg:
+ items:
+ - description: FSI slave address
+
+allOf:
+ - $ref: fsi-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ fsi@3400 {
+ compatible = "ibm,p9-fsi-controller";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+ };
+ };
--
2.39.3
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH v6 11/20] dt-bindings: i2c: i2c-fsi: Convert to json-schema
2024-05-22 19:25 [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems Eddie James
` (9 preceding siblings ...)
2024-05-22 19:25 ` [PATCH v6 10/20] dt-bindings: fsi: Document the FSI Hub Controller Eddie James
@ 2024-05-22 19:25 ` Eddie James
2024-05-23 6:59 ` Krzysztof Kozlowski
2024-05-28 14:52 ` Ninad Palsule
2024-05-22 19:25 ` [PATCH v6 12/20] dt-bindings: arm: aspeed: add IBM P11 BMC boards Eddie James
` (10 subsequent siblings)
21 siblings, 2 replies; 51+ messages in thread
From: Eddie James @ 2024-05-22 19:25 UTC (permalink / raw)
To: linux-fsi
Cc: eajames, devicetree, linux-kernel, ninad, lakshmiy, linux-i2c,
linux-spi, linux-aspeed, andrew, joel, robh, conor+dt, krzk+dt,
andi.shyti, broonie
Convert to json-schema for the FSI-attached I2C controller.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
Changes since v5:
- Use more specific regex for node names
.../devicetree/bindings/i2c/i2c-fsi.txt | 40 ----------
.../devicetree/bindings/i2c/ibm,i2c-fsi.yaml | 76 +++++++++++++++++++
MAINTAINERS | 2 +-
3 files changed, 77 insertions(+), 41 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-fsi.txt
create mode 100644 Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml
diff --git a/Documentation/devicetree/bindings/i2c/i2c-fsi.txt b/Documentation/devicetree/bindings/i2c/i2c-fsi.txt
deleted file mode 100644
index b1be2ceb7e696..0000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-fsi.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Device-tree bindings for FSI-attached I2C master and busses
------------------------------------------------------------
-
-Required properties:
- - compatible = "ibm,i2c-fsi";
- - reg = < address size >; : The FSI CFAM address and address
- space size.
- - #address-cells = <1>; : Number of address cells in child
- nodes.
- - #size-cells = <0>; : Number of size cells in child nodes.
- - child nodes : Nodes to describe busses off the I2C
- master.
-
-Child node required properties:
- - reg = < port number > : The port number on the I2C master.
-
-Child node optional properties:
- - child nodes : Nodes to describe devices on the I2C
- bus.
-
-Examples:
-
- i2c@1800 {
- compatible = "ibm,i2c-fsi";
- reg = < 0x1800 0x400 >;
- #address-cells = <1>;
- #size-cells = <0>;
-
- i2c-bus@0 {
- reg = <0>;
- };
-
- i2c-bus@1 {
- reg = <1>;
-
- eeprom@50 {
- compatible = "vendor,dev-name";
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml b/Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml
new file mode 100644
index 0000000000000..40ea82942e4d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/ibm,i2c-fsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached I2C controller
+
+maintainers:
+ - Eddie James <eajames@linux.ibm.com>
+
+description:
+ This I2C controller is an FSI CFAM engine, providing access to a number of
+ I2C busses. Therefore this node will always be a child of an FSI CFAM node.
+
+properties:
+ compatible:
+ enum:
+ - ibm,i2c-fsi
+
+ reg:
+ items:
+ - description: FSI slave address
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^i2c-bus@[0-9a-f]+$":
+ type: object
+ properties:
+ reg:
+ maxItems: 1
+
+ required:
+ - reg
+
+ allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c@1800 {
+ compatible = "ibm,i2c-fsi";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c-bus@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c-bus@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index f0fe6b2032a21..7884dbe2374c7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8977,7 +8977,7 @@ M: Eddie James <eajames@linux.ibm.com>
L: linux-i2c@vger.kernel.org
L: openbmc@lists.ozlabs.org (moderated for non-subscribers)
S: Maintained
-F: Documentation/devicetree/bindings/i2c/i2c-fsi.txt
+F: Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml
F: drivers/i2c/busses/i2c-fsi.c
FSI-ATTACHED SPI DRIVER
--
2.39.3
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH v6 12/20] dt-bindings: arm: aspeed: add IBM P11 BMC boards
2024-05-22 19:25 [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems Eddie James
` (10 preceding siblings ...)
2024-05-22 19:25 ` [PATCH v6 11/20] dt-bindings: i2c: i2c-fsi: Convert to json-schema Eddie James
@ 2024-05-22 19:25 ` Eddie James
2024-05-28 14:24 ` Ninad Palsule
2024-05-22 19:25 ` [PATCH v6 13/20] ARM: dts: aspeed: Add IBM P11 FSI devices Eddie James
` (9 subsequent siblings)
21 siblings, 1 reply; 51+ messages in thread
From: Eddie James @ 2024-05-22 19:25 UTC (permalink / raw)
To: linux-fsi
Cc: eajames, devicetree, linux-kernel, ninad, lakshmiy, linux-i2c,
linux-spi, linux-aspeed, andrew, joel, robh, conor+dt, krzk+dt,
andi.shyti, broonie
Document two new AST2600 BMC boards for IBM P11 systems.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
index 95113df178cc5..e386d0ebfb14a 100644
--- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
+++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
@@ -86,7 +86,9 @@ properties:
- facebook,harma-bmc
- facebook,minerva-cmc
- facebook,yosemite4-bmc
+ - ibm,blueridge-bmc
- ibm,everest-bmc
+ - ibm,fuji-bmc
- ibm,rainier-bmc
- ibm,system1-bmc
- ibm,tacoma-bmc
--
2.39.3
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH v6 13/20] ARM: dts: aspeed: Add IBM P11 FSI devices
2024-05-22 19:25 [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems Eddie James
` (11 preceding siblings ...)
2024-05-22 19:25 ` [PATCH v6 12/20] dt-bindings: arm: aspeed: add IBM P11 BMC boards Eddie James
@ 2024-05-22 19:25 ` Eddie James
2024-05-22 19:25 ` [PATCH v6 14/20] ARM: dts: aspeed: Add IBM P11 Blueridge BMC system Eddie James
` (8 subsequent siblings)
21 siblings, 0 replies; 51+ messages in thread
From: Eddie James @ 2024-05-22 19:25 UTC (permalink / raw)
To: linux-fsi
Cc: eajames, devicetree, linux-kernel, ninad, lakshmiy, linux-i2c,
linux-spi, linux-aspeed, andrew, joel, robh, conor+dt, krzk+dt,
andi.shyti, broonie
Add the P11 FSI device tree for use in upcoming BMC systems.
Unlike P10, there is no system with only two processors, so
only the quad processor FSI layout is necessary.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
Changes since v5:
- Add bus-frequency
.../arm/boot/dts/aspeed/ibm-power11-quad.dtsi | 1539 +++++++++++++++++
1 file changed, 1539 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi
diff --git a/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi b/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi
new file mode 100644
index 0000000000000..68c941a194b64
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi
@@ -0,0 +1,1539 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 IBM Corp.
+
+/ {
+ aliases {
+ i2c100 = &cfam0_i2c0;
+ i2c101 = &cfam0_i2c1;
+ i2c110 = &cfam0_i2c10;
+ i2c111 = &cfam0_i2c11;
+ i2c112 = &cfam0_i2c12;
+ i2c113 = &cfam0_i2c13;
+ i2c114 = &cfam0_i2c14;
+ i2c115 = &cfam0_i2c15;
+ i2c202 = &cfam1_i2c2;
+ i2c203 = &cfam1_i2c3;
+ i2c210 = &cfam1_i2c10;
+ i2c211 = &cfam1_i2c11;
+ i2c214 = &cfam1_i2c14;
+ i2c215 = &cfam1_i2c15;
+ i2c216 = &cfam1_i2c16;
+ i2c217 = &cfam1_i2c17;
+ i2c300 = &cfam2_i2c0;
+ i2c301 = &cfam2_i2c1;
+ i2c310 = &cfam2_i2c10;
+ i2c311 = &cfam2_i2c11;
+ i2c312 = &cfam2_i2c12;
+ i2c313 = &cfam2_i2c13;
+ i2c314 = &cfam2_i2c14;
+ i2c315 = &cfam2_i2c15;
+ i2c402 = &cfam3_i2c2;
+ i2c403 = &cfam3_i2c3;
+ i2c410 = &cfam3_i2c10;
+ i2c411 = &cfam3_i2c11;
+ i2c414 = &cfam3_i2c14;
+ i2c415 = &cfam3_i2c15;
+ i2c416 = &cfam3_i2c16;
+ i2c417 = &cfam3_i2c17;
+
+ sbefifo100 = &sbefifo100;
+ sbefifo101 = &sbefifo101;
+ sbefifo110 = &sbefifo110;
+ sbefifo111 = &sbefifo111;
+ sbefifo112 = &sbefifo112;
+ sbefifo113 = &sbefifo113;
+ sbefifo114 = &sbefifo114;
+ sbefifo115 = &sbefifo115;
+ sbefifo202 = &sbefifo202;
+ sbefifo203 = &sbefifo203;
+ sbefifo210 = &sbefifo210;
+ sbefifo211 = &sbefifo211;
+ sbefifo214 = &sbefifo214;
+ sbefifo215 = &sbefifo215;
+ sbefifo216 = &sbefifo216;
+ sbefifo217 = &sbefifo217;
+ sbefifo300 = &sbefifo300;
+ sbefifo301 = &sbefifo301;
+ sbefifo310 = &sbefifo310;
+ sbefifo311 = &sbefifo311;
+ sbefifo312 = &sbefifo312;
+ sbefifo313 = &sbefifo313;
+ sbefifo314 = &sbefifo314;
+ sbefifo315 = &sbefifo315;
+ sbefifo402 = &sbefifo402;
+ sbefifo403 = &sbefifo403;
+ sbefifo410 = &sbefifo410;
+ sbefifo411 = &sbefifo411;
+ sbefifo414 = &sbefifo414;
+ sbefifo415 = &sbefifo415;
+ sbefifo416 = &sbefifo416;
+ sbefifo417 = &sbefifo417;
+
+ scom100 = &scom100;
+ scom101 = &scom101;
+ scom110 = &scom110;
+ scom111 = &scom111;
+ scom112 = &scom112;
+ scom113 = &scom113;
+ scom114 = &scom114;
+ scom115 = &scom115;
+ scom202 = &scom202;
+ scom203 = &scom203;
+ scom210 = &scom210;
+ scom211 = &scom211;
+ scom214 = &scom214;
+ scom215 = &scom215;
+ scom216 = &scom216;
+ scom217 = &scom217;
+ scom300 = &scom300;
+ scom301 = &scom301;
+ scom310 = &scom310;
+ scom311 = &scom311;
+ scom312 = &scom312;
+ scom313 = &scom313;
+ scom314 = &scom314;
+ scom315 = &scom315;
+ scom402 = &scom402;
+ scom403 = &scom403;
+ scom410 = &scom410;
+ scom411 = &scom411;
+ scom414 = &scom414;
+ scom415 = &scom415;
+ scom416 = &scom416;
+ scom417 = &scom417;
+
+ spi10 = &cfam0_spi0;
+ spi11 = &cfam0_spi1;
+ spi12 = &cfam0_spi2;
+ spi13 = &cfam0_spi3;
+ spi20 = &cfam1_spi0;
+ spi21 = &cfam1_spi1;
+ spi22 = &cfam1_spi2;
+ spi23 = &cfam1_spi3;
+ spi30 = &cfam2_spi0;
+ spi31 = &cfam2_spi1;
+ spi32 = &cfam2_spi2;
+ spi33 = &cfam2_spi3;
+ spi40 = &cfam3_spi0;
+ spi41 = &cfam3_spi1;
+ spi42 = &cfam3_spi2;
+ spi43 = &cfam3_spi3;
+ };
+};
+
+&fsim0 {
+ #address-cells = <2>;
+ #size-cells = <0>;
+ status = "okay";
+ bus-frequency = <100000000>;
+ cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom@1000 {
+ compatible = "ibm,p9-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,i2c-fsi";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam0_i2c0: i2c-bus@0 {
+ reg = <0>; /* OMI01 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom100: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo100: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam0_i2c1: i2c-bus@1 {
+ reg = <1>; /* OMI23 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom101: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo101: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam0_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom110: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo110: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam0_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom111: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo111: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam0_i2c12: i2c-bus@c {
+ reg = <12>; /* OP4A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom112: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo112: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam0_i2c13: i2c-bus@d {
+ reg = <13>; /* OP4B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom113: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo113: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam0_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom114: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo114: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam0_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom115: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo115: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam0_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam0_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam0_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam0_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+
+ occ {
+ compatible = "ibm,p10-occ";
+
+ hwmon {
+ compatible = "ibm,p10-occ-hwmon";
+ ibm,no-poll-on-init;
+ };
+ };
+ };
+
+ fsi_hub0: fsi@3400 {
+ compatible = "ibm,p9-fsi-controller";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&fsi_hub0 {
+ cfam@1,0 {
+ reg = <1 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <1>;
+
+ scom@1000 {
+ compatible = "ibm,p9-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,i2c-fsi";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam1_i2c2: i2c-bus@2 {
+ reg = <2>; /* OMI45 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom202: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo202: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam1_i2c3: i2c-bus@3 {
+ reg = <3>; /* OMI67 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom203: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo203: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam1_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom210: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo210: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam1_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom211: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo211: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam1_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom214: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo214: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam1_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom215: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo215: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam1_i2c16: i2c-bus@10 {
+ reg = <16>; /* OP6A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom216: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo216: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam1_i2c17: i2c-bus@11 {
+ reg = <17>; /* OP6B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom217: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo217: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam1_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam1_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam1_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam1_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+
+ occ {
+ compatible = "ibm,p10-occ";
+
+ hwmon {
+ compatible = "ibm,p10-occ-hwmon";
+ ibm,no-poll-on-init;
+ };
+ };
+ };
+
+ fsi@3400 {
+ compatible = "ibm,p9-fsi-controller";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-scan-on-init;
+ };
+ };
+
+ cfam@2,0 {
+ reg = <2 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <2>;
+
+ scom@1000 {
+ compatible = "ibm,p9-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,i2c-fsi";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam2_i2c0: i2c-bus@0 {
+ reg = <0>; /* OM01 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom300: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo300: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam2_i2c1: i2c-bus@1 {
+ reg = <1>; /* OM23 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom301: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo301: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam2_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom310: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo310: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam2_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom311: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo311: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam2_i2c12: i2c-bus@c {
+ reg = <12>; /* OP4A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom312: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo312: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam2_i2c13: i2c-bus@d {
+ reg = <13>; /* OP4B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom313: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo313: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam2_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom314: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo314: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam2_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom315: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo315: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam2_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam2_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam2_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam2_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+
+ occ {
+ compatible = "ibm,p10-occ";
+
+ hwmon {
+ compatible = "ibm,p10-occ-hwmon";
+ ibm,no-poll-on-init;
+ };
+ };
+ };
+
+ fsi@3400 {
+ compatible = "ibm,p9-fsi-controller";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-scan-on-init;
+ };
+ };
+
+ cfam@3,0 {
+ reg = <3 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <3>;
+
+ scom@1000 {
+ compatible = "ibm,p9-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,i2c-fsi";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam3_i2c2: i2c-bus@2 {
+ reg = <2>; /* OM45 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom402: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo402: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam3_i2c3: i2c-bus@3 {
+ reg = <3>; /* OM67 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom403: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo403: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam3_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom410: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo410: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam3_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom411: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo411: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam3_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom414: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo414: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam3_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom415: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo415: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam3_i2c16: i2c-bus@10 {
+ reg = <16>; /* OP6A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom416: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo416: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam3_i2c17: i2c-bus@11 {
+ reg = <17>; /* OP6B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom417: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo417: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam3_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam3_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam3_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam3_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+
+ occ {
+ compatible = "ibm,p10-occ";
+
+ hwmon {
+ compatible = "ibm,p10-occ-hwmon";
+ ibm,no-poll-on-init;
+ };
+ };
+ };
+
+ fsi@3400 {
+ compatible = "ibm,p9-fsi-controller";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-scan-on-init;
+ };
+ };
+};
--
2.39.3
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH v6 14/20] ARM: dts: aspeed: Add IBM P11 Blueridge BMC system
2024-05-22 19:25 [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems Eddie James
` (12 preceding siblings ...)
2024-05-22 19:25 ` [PATCH v6 13/20] ARM: dts: aspeed: Add IBM P11 FSI devices Eddie James
@ 2024-05-22 19:25 ` Eddie James
[not found] ` <dca4ac91-c18b-4271-a3f9-fbf3b5a3c43d@linux.ibm.com>
2024-05-22 19:25 ` [PATCH v6 15/20] ARM: dts: aspeed: Add IBM P11 Blueridge 4U " Eddie James
` (7 subsequent siblings)
21 siblings, 1 reply; 51+ messages in thread
From: Eddie James @ 2024-05-22 19:25 UTC (permalink / raw)
To: linux-fsi
Cc: eajames, devicetree, linux-kernel, ninad, lakshmiy, linux-i2c,
linux-spi, linux-aspeed, andrew, joel, robh, conor+dt, krzk+dt,
andi.shyti, broonie
Add the device tree for the new BMC system. The Blueridge is a
P11 system with four processors.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
Changes since v5:
- Change model from "Blueridge" to "Blueridge 2U"
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../dts/aspeed/aspeed-bmc-ibm-blueridge.dts | 1691 +++++++++++++++++
2 files changed, 1692 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index e51c6d2037255..f3db9ee156429 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -32,6 +32,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-facebook-yamp.dtb \
aspeed-bmc-facebook-yosemitev2.dtb \
aspeed-bmc-facebook-yosemite4.dtb \
+ aspeed-bmc-ibm-blueridge.dtb \
aspeed-bmc-ibm-bonnell.dtb \
aspeed-bmc-ibm-everest.dtb \
aspeed-bmc-ibm-rainier.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts
new file mode 100644
index 0000000000000..a170b4b7c0fb7
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts
@@ -0,0 +1,1691 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 IBM Corp.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include "aspeed-g6.dtsi"
+#include "ibm-power11-quad.dtsi"
+
+/ {
+ model = "Blueridge 2U";
+ compatible = "ibm,blueridge-bmc", "aspeed,ast2600";
+
+ aliases {
+ serial4 = &uart5;
+ i2c16 = &i2c2mux0;
+ i2c17 = &i2c2mux1;
+ i2c18 = &i2c2mux2;
+ i2c19 = &i2c2mux3;
+ i2c20 = &i2c4mux0chn0;
+ i2c21 = &i2c4mux0chn1;
+ i2c22 = &i2c4mux0chn2;
+ i2c23 = &i2c5mux0chn0;
+ i2c24 = &i2c5mux0chn1;
+ i2c25 = &i2c6mux0chn0;
+ i2c26 = &i2c6mux0chn1;
+ i2c27 = &i2c6mux0chn2;
+ i2c28 = &i2c6mux0chn3;
+ i2c29 = &i2c11mux0chn0;
+ i2c30 = &i2c11mux0chn1;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ event_log: region@b3d00000 {
+ reg = <0xb3d00000 0x100000>;
+ no-map;
+ };
+
+ ramoops@b3e00000 {
+ compatible = "ramoops";
+ reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+ record-size = <0x8000>;
+ console-size = <0x8000>;
+ ftrace-size = <0x8000>;
+ pmsg-size = <0x8000>;
+ max-reason = <3>; /* KMSG_DUMP_EMERG */
+ };
+
+ /* LPC FW cycle bridge region requires natural alignment */
+ flash_memory: region@b4000000 {
+ reg = <0xb4000000 0x04000000>; /* 64M */
+ no-map;
+ };
+
+ /* VGA region is dictated by hardware strapping */
+ vga_memory: region@bf000000 {
+ compatible = "shared-dma-pool";
+ reg = <0xbf000000 0x01000000>; /* 16M */
+ no-map;
+ };
+ };
+
+ i2c-mux {
+ compatible = "i2c-mux-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-parent = <&i2c2>;
+ idle-state = <0>;
+ mux-gpios = <&gpio0 ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>,
+ <&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
+
+ i2c2mux0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2mux1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2mux2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2mux3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ /* BMC Card fault LED at the back */
+ led-bmc-ingraham0 {
+ gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+ };
+
+ /* Enclosure ID LED at the back */
+ led-rear-enc-id0 {
+ gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ /* Enclosure fault LED at the back */
+ led-rear-enc-fault0 {
+ gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+ };
+
+ /* PCIE slot power LED */
+ led-pcieslot-power {
+ gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ poll-interval = <1000>;
+
+ event-fan0-presence {
+ gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+ label = "fan0-presence";
+ linux,code = <6>;
+ };
+
+ event-fan1-presence {
+ gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+ label = "fan1-presence";
+ linux,code = <7>;
+ };
+
+ event-fan2-presence {
+ gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
+ label = "fan2-presence";
+ linux,code = <8>;
+ };
+
+ event-fan3-presence {
+ gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
+ label = "fan3-presence";
+ linux,code = <9>;
+ };
+
+ event-fan4-presence {
+ gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
+ label = "fan4-presence";
+ linux,code = <10>;
+ };
+
+ event-fan5-presence {
+ gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
+ label = "fan5-presence";
+ linux,code = <11>;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc1 7>;
+ };
+};
+
+&adc1 {
+ status = "okay";
+ aspeed,int-vref-microvolt = <2500000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+ &pinctrl_adc10_default &pinctrl_adc11_default
+ &pinctrl_adc12_default &pinctrl_adc13_default
+ &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
+
+&gpio0 {
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "bmc-management-ready","","","","","","checkstop","",
+ /*C0-C7*/ "","","","","","","","",
+ /*D0-D7*/ "","","","","","","","",
+ /*E0-E7*/ "","","","","","","","",
+ /*F0-F7*/ "","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","",
+ "factory-reset-toggle","",
+ /*G0-G7*/ "","","","","","","","",
+ /*H0-H7*/ "","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","",
+ /*I0-I7*/ "","","","","","","bmc-secure-boot","",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "","","","","","","","",
+ /*N0-N7*/ "","","","","","","","",
+ /*O0-O7*/ "","","","usb-power","","","","",
+ /*P0-P7*/ "","","","","pcieslot-power","","","",
+ /*Q0-Q7*/ "cfam-reset","","regulator-standby-faulted","","","","","",
+ /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","",
+ "",
+ /*S0-S7*/ "presence-ps0","presence-ps1","presence-ps2","presence-ps3",
+ "power-ffs-sync-history","","","",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "","","","","","","","",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","","","","","","","",
+ /*Z0-Z7*/ "","","","","","","","";
+
+ i2c3-mux-oe-n-hog {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>;
+ line-name = "I2C3_MUX_OE_N";
+ output-high;
+ };
+
+ usb-power-hog {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+ output-high;
+ };
+};
+
+&emmc_controller {
+ status = "okay";
+};
+
+&pinctrl_emmc_default {
+ bias-disable;
+};
+
+&emmc {
+ status = "okay";
+ clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&ibt {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ gpio@20 {
+ compatible = "ti,tca9554";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names = "",
+ "RUSSEL_FW_I2C_ENABLE_N",
+ "RUSSEL_OPPANEL_PRESENCE_N",
+ "BLYTH_OPPANEL_PRESENCE_N",
+ "CPU_TPM_CARD_PRESENT_N",
+ "DASD_BP2_PRESENT_N",
+ "DASD_BP1_PRESENT_N",
+ "DASD_BP0_PRESENT_N";
+ };
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+
+ power-supply@68 {
+ compatible = "ibm,cffps";
+ reg = <0x68>;
+ };
+
+ power-supply@69 {
+ compatible = "ibm,cffps";
+ reg = <0x69>;
+ };
+
+ led-controller@61 {
+ compatible = "nxp,pca9552";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "SLOT0_PRSNT_EN_RSVD", "SLOT1_PRSNT_EN_RSVD",
+ "SLOT2_PRSNT_EN_RSVD", "SLOT3_PRSNT_EN_RSVD",
+ "SLOT4_PRSNT_EN_RSVD", "SLOT0_EXPANDER_PRSNT_N",
+ "SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N",
+ "SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N",
+ "", "", "", "", "", "";
+ };
+};
+
+&i2c4 {
+ status = "okay";
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ temperature-sensor@49 {
+ compatible = "ti,tmp275";
+ reg = <0x49>;
+ };
+
+ temperature-sensor@4a {
+ compatible = "ti,tmp275";
+ reg = <0x4a>;
+ };
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c4mux0chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard0-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard0-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c4mux0chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+ };
+
+ i2c4mux0chn2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+ };
+ };
+};
+
+&i2c5 {
+ status = "okay";
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ temperature-sensor@49 {
+ compatible = "ti,tmp275";
+ reg = <0x49>;
+ };
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c5mux0chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard3-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard3-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c5mux0chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ led-controller@61 {
+ compatible = "nxp,pca9551";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard4-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard4-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+ };
+};
+
+&i2c6 {
+ status = "okay";
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ temperature-sensor@4a {
+ compatible = "ti,tmp275";
+ reg = <0x4a>;
+ };
+
+ temperature-sensor@4b {
+ compatible = "ti,tmp275";
+ reg = <0x4b>;
+ };
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c6mux0chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+
+ i2c6mux0chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+ };
+
+ i2c6mux0chn2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c6mux0chn3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+ };
+ };
+};
+
+&i2c7 {
+ multi-master;
+ status = "okay";
+
+ led-controller@30 {
+ compatible = "ibm,pca9552";
+ reg = <0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "pcieslot0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "pcieslot1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "pcieslot2";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "pcieslot3";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "pcieslot4";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "cpu1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "cpu-vrm1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "lcd-russel";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ led-controller@31 {
+ compatible = "ibm,pca9552";
+ reg = <0x31>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "ddimm0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "ddimm1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "ddimm2";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "ddimm3";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "ddimm4";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "ddimm5";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "ddimm6";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "ddimm7";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "ddimm8";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "ddimm9";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "ddimm10";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "ddimm11";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ reg = <12>;
+ default-state = "keep";
+ label = "ddimm12";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ reg = <13>;
+ default-state = "keep";
+ label = "ddimm13";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ reg = <14>;
+ default-state = "keep";
+ label = "ddimm14";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ reg = <15>;
+ default-state = "keep";
+ label = "ddimm15";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ led-controller@32 {
+ compatible = "ibm,pca9552";
+ reg = <0x32>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "ddimm16";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "ddimm17";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "ddimm18";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "ddimm19";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "ddimm20";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "ddimm21";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "ddimm22";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "ddimm23";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "ddimm24";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "ddimm25";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "ddimm26";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "ddimm27";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ reg = <12>;
+ default-state = "keep";
+ label = "ddimm28";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ reg = <13>;
+ default-state = "keep";
+ label = "ddimm29";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ reg = <14>;
+ default-state = "keep";
+ label = "ddimm30";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ reg = <15>;
+ default-state = "keep";
+ label = "ddimm31";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ led-controller@33 {
+ compatible = "ibm,pca9552";
+ reg = <0x33>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "planar";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cpu0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "dasd-pyramid0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "dasd-pyramid1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "dasd-pyramid2";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "cpu0-vrm0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "rtc-battery";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "base-blyth";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "pcieslot6";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "pcieslot7";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "pcieslot8";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ reg = <12>;
+ default-state = "keep";
+ label = "pcieslot9";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ reg = <13>;
+ default-state = "keep";
+ label = "pcieslot10";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ reg = <14>;
+ default-state = "keep";
+ label = "pcieslot11";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ reg = <15>;
+ default-state = "keep";
+ label = "tpm-wilson";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ humidity-sensor@40 {
+ compatible = "silabs,si7020";
+ reg = <0x40>;
+ };
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ pwm@52 {
+ compatible = "maxim,max31785a";
+ reg = <0x52>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "front-sys-id0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "front-check-log0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "front-enc-fault1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "front-sys-pwron0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ pca0: led-controller@61 {
+ compatible = "nxp,pca9552";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "fan0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "fan1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "fan2";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "fan3";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "fan4";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "fan5";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ lcd-controller@62 {
+ compatible = "ibm,op-panel";
+ reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+ };
+
+ pressure-sensor@76 {
+ compatible = "infineon,dps310";
+ reg = <0x76>;
+ #io-channel-cells = <0>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+};
+
+&i2c8 {
+ status = "okay";
+
+ pmic@11 {
+ compatible = "ti,ucd90320";
+ reg = <0x11>;
+ };
+
+ rtc@32 {
+ compatible = "epson,rx8900";
+ reg = <0x32>;
+ };
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ temperature-sensor@4a {
+ compatible = "ti,tmp275";
+ reg = <0x4a>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "power-config-full-load", "";
+ };
+
+ led-controller@61 {
+ compatible = "nxp,pca9552";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD",
+ "SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD",
+ "SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD",
+ "SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N",
+ "SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N",
+ "SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N",
+ "", "", "", "";
+ };
+
+};
+
+&i2c9 {
+ status = "okay";
+
+ temperature-sensor@4c {
+ compatible = "ti,tmp423";
+ reg = <0x4c>;
+ };
+
+ temperature-sensor@4d {
+ compatible = "ti,tmp423";
+ reg = <0x4d>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+};
+
+&i2c10 {
+ status = "okay";
+
+ temperature-sensor@4c {
+ compatible = "ti,tmp423";
+ reg = <0x4c>;
+ };
+
+ temperature-sensor@4d {
+ compatible = "ti,tmp423";
+ reg = <0x4d>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ temperature-sensor@49 {
+ compatible = "ti,tmp275";
+ reg = <0x49>;
+ };
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c11mux0chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard10-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard10-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c11mux0chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+ };
+ };
+};
+
+&i2c12 {
+ status = "okay";
+
+ tpm@2e {
+ compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+ reg = <0x2e>;
+ memory-region = <&event_log>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+};
+
+&i2c13 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "nvme0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "nvme1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "nvme2";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "nvme3";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "nvme4";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "nvme5";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "nvme6";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "nvme7";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+};
+
+&i2c14 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "nvme8";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "nvme9";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "nvme10";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "nvme11";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "nvme12";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "nvme13";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "nvme14";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "nvme15";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+};
+
+&i2c15 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "nvme16";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "nvme17";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "nvme18";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "nvme19";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "nvme20";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "nvme21";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "nvme22";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "nvme23";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&vuart1 {
+ status = "okay";
+};
+
+&vuart2 {
+ status = "okay";
+};
+
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+};
+
+&mac2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii3_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+ <&syscon ASPEED_CLK_MAC3RCLK>;
+ clock-names = "MACCLK", "RCLK";
+ use-ncsi;
+};
+
+&mac3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii4_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+ <&syscon ASPEED_CLK_MAC4RCLK>;
+ clock-names = "MACCLK", "RCLK";
+ use-ncsi;
+};
+
+&wdt1 {
+ aspeed,reset-type = "none";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+ status = "okay";
+};
+
+&xdma {
+ status = "okay";
+ memory-region = <&vga_memory>;
+};
+
+&kcs2 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca2>;
+ aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
--
2.39.3
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH v6 15/20] ARM: dts: aspeed: Add IBM P11 Blueridge 4U BMC system
2024-05-22 19:25 [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems Eddie James
` (13 preceding siblings ...)
2024-05-22 19:25 ` [PATCH v6 14/20] ARM: dts: aspeed: Add IBM P11 Blueridge BMC system Eddie James
@ 2024-05-22 19:25 ` Eddie James
2024-05-24 22:27 ` Ninad Palsule
2024-05-22 19:25 ` [PATCH v6 16/20] ARM: dts: aspeed: Add IBM P11 Fuji " Eddie James
` (6 subsequent siblings)
21 siblings, 1 reply; 51+ messages in thread
From: Eddie James @ 2024-05-22 19:25 UTC (permalink / raw)
To: linux-fsi
Cc: eajames, devicetree, linux-kernel, ninad, lakshmiy, linux-i2c,
linux-spi, linux-aspeed, andrew, joel, robh, conor+dt, krzk+dt,
andi.shyti, broonie
The 4U Blueridge is identical to the Blueridge system but has two extra
power supplies.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
.../aspeed/aspeed-bmc-ibm-blueridge-4u.dts | 21 +++++++++++++++++++
1 file changed, 21 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge-4u.dts
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge-4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge-4u.dts
new file mode 100644
index 0000000000000..839aad4ddd917
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge-4u.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-bmc-ibm-blueridge.dts"
+
+/ {
+ model = "Blueridge 4U";
+};
+
+&i2c3 {
+ power-supply@6a {
+ compatible = "ibm,cffps";
+ reg = <0x6a>;
+ };
+
+ power-supply@6b {
+ compatible = "ibm,cffps";
+ reg = <0x6b>;
+ };
+};
--
2.39.3
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH v6 16/20] ARM: dts: aspeed: Add IBM P11 Fuji BMC system
2024-05-22 19:25 [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems Eddie James
` (14 preceding siblings ...)
2024-05-22 19:25 ` [PATCH v6 15/20] ARM: dts: aspeed: Add IBM P11 Blueridge 4U " Eddie James
@ 2024-05-22 19:25 ` Eddie James
[not found] ` <3ac517f0-0394-4310-8840-d806de5ec082@linux.ibm.com>
2024-05-22 19:25 ` [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens " Eddie James
` (5 subsequent siblings)
21 siblings, 1 reply; 51+ messages in thread
From: Eddie James @ 2024-05-22 19:25 UTC (permalink / raw)
To: linux-fsi
Cc: eajames, devicetree, linux-kernel, ninad, lakshmiy, linux-i2c,
linux-spi, linux-aspeed, andrew, joel, robh, conor+dt, krzk+dt,
andi.shyti, broonie
Add the device tree for the new BMC system. The Fuji is a P11
system with eight processors.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
Changes since v5:
- Add missing reset gpio for led controller on i2c bus 8
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts | 3881 +++++++++++++++++
2 files changed, 3882 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index f3db9ee156429..5e3392621697a 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -35,6 +35,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-ibm-blueridge.dtb \
aspeed-bmc-ibm-bonnell.dtb \
aspeed-bmc-ibm-everest.dtb \
+ aspeed-bmc-ibm-fuji.dtb \
aspeed-bmc-ibm-rainier.dtb \
aspeed-bmc-ibm-rainier-1s4u.dtb \
aspeed-bmc-ibm-rainier-4u.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts
new file mode 100644
index 0000000000000..d2aa961eea313
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts
@@ -0,0 +1,3881 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 IBM Corp.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include "aspeed-g6.dtsi"
+#include "ibm-power11-quad.dtsi"
+
+/ {
+ model = "Fuji";
+ compatible = "ibm,fuji-bmc", "aspeed,ast2600";
+
+ aliases {
+ i2c500 = &cfam4_i2c0;
+ i2c501 = &cfam4_i2c1;
+ i2c510 = &cfam4_i2c10;
+ i2c511 = &cfam4_i2c11;
+ i2c512 = &cfam4_i2c12;
+ i2c513 = &cfam4_i2c13;
+ i2c514 = &cfam4_i2c14;
+ i2c515 = &cfam4_i2c15;
+ i2c602 = &cfam5_i2c2;
+ i2c603 = &cfam5_i2c3;
+ i2c610 = &cfam5_i2c10;
+ i2c611 = &cfam5_i2c11;
+ i2c614 = &cfam5_i2c14;
+ i2c615 = &cfam5_i2c15;
+ i2c616 = &cfam5_i2c16;
+ i2c617 = &cfam5_i2c17;
+ i2c700 = &cfam6_i2c0;
+ i2c701 = &cfam6_i2c1;
+ i2c710 = &cfam6_i2c10;
+ i2c711 = &cfam6_i2c11;
+ i2c712 = &cfam6_i2c12;
+ i2c713 = &cfam6_i2c13;
+ i2c714 = &cfam6_i2c14;
+ i2c715 = &cfam6_i2c15;
+ i2c802 = &cfam7_i2c2;
+ i2c803 = &cfam7_i2c3;
+ i2c810 = &cfam7_i2c10;
+ i2c811 = &cfam7_i2c11;
+ i2c814 = &cfam7_i2c14;
+ i2c815 = &cfam7_i2c15;
+ i2c816 = &cfam7_i2c16;
+ i2c817 = &cfam7_i2c17;
+
+ i2c16 = &i2c4mux0chn0;
+ i2c17 = &i2c4mux0chn1;
+ i2c18 = &i2c4mux0chn2;
+ i2c19 = &i2c5mux0chn0;
+ i2c20 = &i2c5mux0chn1;
+ i2c21 = &i2c5mux0chn2;
+ i2c22 = &i2c5mux0chn3;
+ i2c23 = &i2c6mux0chn0;
+ i2c24 = &i2c6mux0chn1;
+ i2c25 = &i2c6mux0chn2;
+ i2c26 = &i2c6mux0chn3;
+ i2c27 = &i2c14mux0chn0;
+ i2c28 = &i2c14mux0chn1;
+ i2c29 = &i2c14mux0chn2;
+ i2c30 = &i2c14mux0chn3;
+ i2c31 = &i2c14mux1chn0;
+ i2c32 = &i2c14mux1chn1;
+ i2c33 = &i2c14mux1chn2;
+ i2c34 = &i2c14mux1chn3;
+ i2c35 = &i2c15mux0chn0;
+ i2c36 = &i2c15mux0chn1;
+ i2c37 = &i2c15mux0chn2;
+ i2c38 = &i2c15mux0chn3;
+ i2c39 = &i2c15mux1chn0;
+ i2c40 = &i2c15mux1chn1;
+ i2c41 = &i2c15mux1chn2;
+ i2c42 = &i2c15mux1chn3;
+ i2c43 = &i2c15mux2chn0;
+ i2c44 = &i2c15mux2chn1;
+ i2c45 = &i2c15mux2chn2;
+ i2c46 = &i2c15mux2chn3;
+ i2c47 = &i2c8mux0chn0;
+ i2c48 = &i2c8mux0chn1;
+
+ serial4 = &uart5;
+
+ sbefifo500 = &sbefifo500;
+ sbefifo501 = &sbefifo501;
+ sbefifo510 = &sbefifo510;
+ sbefifo511 = &sbefifo511;
+ sbefifo512 = &sbefifo512;
+ sbefifo513 = &sbefifo513;
+ sbefifo514 = &sbefifo514;
+ sbefifo515 = &sbefifo515;
+ sbefifo602 = &sbefifo602;
+ sbefifo603 = &sbefifo603;
+ sbefifo610 = &sbefifo610;
+ sbefifo611 = &sbefifo611;
+ sbefifo614 = &sbefifo614;
+ sbefifo615 = &sbefifo615;
+ sbefifo616 = &sbefifo616;
+ sbefifo617 = &sbefifo617;
+ sbefifo700 = &sbefifo700;
+ sbefifo701 = &sbefifo701;
+ sbefifo710 = &sbefifo710;
+ sbefifo711 = &sbefifo711;
+ sbefifo712 = &sbefifo712;
+ sbefifo713 = &sbefifo713;
+ sbefifo714 = &sbefifo714;
+ sbefifo715 = &sbefifo715;
+ sbefifo802 = &sbefifo802;
+ sbefifo803 = &sbefifo803;
+ sbefifo810 = &sbefifo810;
+ sbefifo811 = &sbefifo811;
+ sbefifo814 = &sbefifo814;
+ sbefifo815 = &sbefifo815;
+ sbefifo816 = &sbefifo816;
+ sbefifo817 = &sbefifo817;
+
+ scom500 = &scom500;
+ scom501 = &scom501;
+ scom510 = &scom510;
+ scom511 = &scom511;
+ scom512 = &scom512;
+ scom513 = &scom513;
+ scom514 = &scom514;
+ scom515 = &scom515;
+ scom602 = &scom602;
+ scom603 = &scom603;
+ scom610 = &scom610;
+ scom611 = &scom611;
+ scom614 = &scom614;
+ scom615 = &scom615;
+ scom616 = &scom616;
+ scom617 = &scom617;
+ scom700 = &scom700;
+ scom701 = &scom701;
+ scom710 = &scom710;
+ scom711 = &scom711;
+ scom712 = &scom712;
+ scom713 = &scom713;
+ scom714 = &scom714;
+ scom715 = &scom715;
+ scom802 = &scom802;
+ scom803 = &scom803;
+ scom810 = &scom810;
+ scom811 = &scom811;
+ scom814 = &scom814;
+ scom815 = &scom815;
+ scom816 = &scom816;
+ scom817 = &scom817;
+
+ spi50 = &cfam4_spi0;
+ spi51 = &cfam4_spi1;
+ spi52 = &cfam4_spi2;
+ spi53 = &cfam4_spi3;
+ spi60 = &cfam5_spi0;
+ spi61 = &cfam5_spi1;
+ spi62 = &cfam5_spi2;
+ spi63 = &cfam5_spi3;
+ spi70 = &cfam6_spi0;
+ spi71 = &cfam6_spi1;
+ spi72 = &cfam6_spi2;
+ spi73 = &cfam6_spi3;
+ spi80 = &cfam7_spi0;
+ spi81 = &cfam7_spi1;
+ spi82 = &cfam7_spi2;
+ spi83 = &cfam7_spi3;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ event_log: region@b3d00000 {
+ reg = <0xb3d00000 0x100000>;
+ no-map;
+ };
+
+ ramoops@b3e00000 {
+ compatible = "ramoops";
+ reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+ record-size = <0x8000>;
+ console-size = <0x8000>;
+ ftrace-size = <0x8000>;
+ pmsg-size = <0x8000>;
+ max-reason = <3>; /* KMSG_DUMP_EMERG */
+ };
+
+ /* LPC FW cycle bridge region requires natural alignment */
+ flash_memory: region@b4000000 {
+ reg = <0xb4000000 0x04000000>; /* 64M */
+ no-map;
+ };
+
+ /* VGA region is dictated by hardware strapping */
+ vga_memory: region@bf000000 {
+ compatible = "shared-dma-pool";
+ reg = <0xbf000000 0x01000000>; /* 16M */
+ no-map;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ poll-interval = <1000>;
+
+ event-fan0-presence {
+ gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
+ label = "fan0-presence";
+ linux,code = <15>;
+ };
+
+ event-fan1-presence {
+ gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
+ label = "fan1-presence";
+ linux,code = <14>;
+ };
+
+ event-fan2-presence {
+ gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
+ label = "fan2-presence";
+ linux,code = <13>;
+ };
+
+ event-fan3-presence {
+ gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
+ label = "fan3-presence";
+ linux,code = <12>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ /* RTC battery fault LED at the back */
+ led-rtc-battery {
+ gpios = <&gpio0 ASPEED_GPIO(H, 0) GPIO_ACTIVE_LOW>;
+ };
+
+ /* BMC Card fault LED at the back */
+ led-bmc {
+ gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+ };
+
+ /* Enclosure Identify LED at the back */
+ led-rear-enc-id0 {
+ gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ /* Enclosure fault LED at the back */
+ led-rear-enc-fault0 {
+ gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+ };
+
+ /* PCIE slot power LED */
+ led-pcieslot-power {
+ gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc1 7>;
+ };
+};
+
+&adc1 {
+ status = "okay";
+ aspeed,int-vref-microvolt = <2500000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+ &pinctrl_adc10_default &pinctrl_adc11_default
+ &pinctrl_adc12_default &pinctrl_adc13_default
+ &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&gpio0 {
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "bmc-management-ready","","","","","","checkstop","",
+ /*C0-C7*/ "","","","","","","","",
+ /*D0-D7*/ "","","","","","","","",
+ /*E0-E7*/ "","","","","","","","",
+ /*F0-F7*/ "","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","",
+ "factory-reset-toggle","",
+ /*G0-G7*/ "","","","","","","","",
+ /*H0-H7*/ "led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","",
+ "","",
+ /*I0-I7*/ "","","","","","","bmc-secure-boot","",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "","","","","","","","",
+ /*N0-N7*/ "","","","","","","","",
+ /*O0-O7*/ "","","","usb-power","","","","",
+ /*P0-P7*/ "","","","","led-pcieslot-power","","","",
+ /*Q0-Q7*/ "","","regulator-standby-faulted","","","","","",
+ /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","",
+ "I2C_FLASH_MICRO_N","","",
+ /*S0-S7*/ "","","","","power-ffs-sync-history","","","",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "","BMC_3RESTART_ATTEMPT_P","","","","","","",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","","","","","","","",
+ /*Z0-Z7*/ "","","","","","","","";
+
+ usb-power-hog {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+ output-high;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ led-controller@62 {
+ compatible = "nxp,pca9552";
+ reg = <0x62>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "presence-ps0",
+ "presence-ps1",
+ "presence-ps2",
+ "presence-ps3",
+ "presence-pdb",
+ "presence-tpm",
+ "", "",
+ "presence-cp0",
+ "presence-cp1",
+ "presence-cp2",
+ "presence-cp3",
+ "presence-dasd",
+ "presence-lcd-op",
+ "presence-base-op",
+ "";
+ };
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+
+ eeprom@54 {
+ compatible = "atmel,24c128";
+ reg = <0x54>;
+ };
+
+ power-supply@68 {
+ compatible = "ibm,cffps";
+ reg = <0x68>;
+ };
+
+ power-supply@69 {
+ compatible = "ibm,cffps";
+ reg = <0x69>;
+ };
+
+ power-supply@6b {
+ compatible = "ibm,cffps";
+ reg = <0x6b>;
+ };
+
+ power-supply@6d {
+ compatible = "ibm,cffps";
+ reg = <0x6d>;
+ };
+};
+
+&i2c4 {
+ status = "okay";
+
+ led-controller@65 {
+ compatible = "nxp,pca9552";
+ reg = <0x65>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "presence-cable-card1",
+ "presence-cable-card2",
+ "presence-cable-card3",
+ "presence-cable-card4",
+ "presence-cable-card5",
+ "expander-cable-card1",
+ "expander-cable-card2",
+ "expander-cable-card3",
+ "expander-cable-card4",
+ "expander-cable-card5";
+ };
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c4mux0chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+
+ led-controller@62 {
+ compatible = "nxp,pca9551";
+ reg = <0x62>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c01-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c01-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c4mux0chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c02-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c02-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c4mux0chn2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ led-controller@61 {
+ compatible = "nxp,pca9551";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c03-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c03-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+ };
+};
+
+&i2c5 {
+ status = "okay";
+
+ led-controller@66 {
+ compatible = "nxp,pca9552";
+ reg = <0x66>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "presence-cable-card6",
+ "presence-cable-card7",
+ "presence-cable-card8",
+ "presence-cable-card9",
+ "presence-cable-card10",
+ "presence-cable-card11",
+ "expander-cable-card6",
+ "expander-cable-card7",
+ "expander-cable-card8",
+ "expander-cable-card9",
+ "expander-cable-card10",
+ "expander-cable-card11";
+ };
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c5mux0chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c04-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c04-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c5mux0chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ led-controller@61 {
+ compatible = "nxp,pca9551";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c05-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c05-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c5mux0chn2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+
+ led-controller@62 {
+ compatible = "nxp,pca9551";
+ reg = <0x62>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c06-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c06-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c5mux0chn3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+
+ led-controller@63 {
+ compatible = "nxp,pca9551";
+ reg = <0x63>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c07-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c07-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+ };
+};
+
+&i2c6 {
+ status = "okay";
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c6mux0chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c08-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c08-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c6mux0chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+
+ led-controller@62 {
+ compatible = "nxp,pca9551";
+ reg = <0x62>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c09-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c09-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c6mux0chn2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+
+ led-controller@63 {
+ compatible = "nxp,pca9551";
+ reg = <0x63>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c10-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c10-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c6mux0chn3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ led-controller@61 {
+ compatible = "nxp,pca9551";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c11-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c11-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+ };
+
+ led-controller@65 {
+ compatible = "nxp,pca9552";
+ reg = <0x65>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "pcieslot-c01";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "pcieslot-c02";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "pcieslot-c03";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "pcieslot-c04";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "pcieslot-c05";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "pcieslot-c06";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "pcieslot-c07";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "pcieslot-c08";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "pcieslot-c09";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "pcieslot-c10";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "pcieslot-c11";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+};
+
+&i2c7 {
+ status = "okay";
+
+ led-controller@31 {
+ compatible = "ibm,pca9552";
+ reg = <0x31>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "ddimm0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "ddimm1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "ddimm2";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "ddimm3";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "ddimm4";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "ddimm5";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "ddimm6";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "ddimm7";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "ddimm8";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "ddimm9";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "ddimm10";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "ddimm11";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ reg = <12>;
+ default-state = "keep";
+ label = "ddimm12";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ reg = <13>;
+ default-state = "keep";
+ label = "ddimm13";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ reg = <14>;
+ default-state = "keep";
+ label = "ddimm14";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ reg = <15>;
+ default-state = "keep";
+ label = "ddimm15";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ led-controller@32 {
+ compatible = "ibm,pca9552";
+ reg = <0x32>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "ddimm16";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "ddimm17";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "ddimm18";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "ddimm19";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "ddimm20";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "ddimm21";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "ddimm22";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "ddimm23";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "ddimm24";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "ddimm25";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "ddimm26";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "ddimm27";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ reg = <12>;
+ default-state = "keep";
+ label = "ddimm28";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ reg = <13>;
+ default-state = "keep";
+ label = "ddimm29";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ reg = <14>;
+ default-state = "keep";
+ label = "ddimm30";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ reg = <15>;
+ default-state = "keep";
+ label = "ddimm31";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ led-controller@33 {
+ compatible = "ibm,pca9552";
+ reg = <0x33>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "ddimm32";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "ddimm33";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "ddimm34";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "ddimm35";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "ddimm36";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "ddimm37";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "ddimm38";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "ddimm39";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "ddimm40";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "ddimm41";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "ddimm42";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "ddimm43";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ reg = <12>;
+ default-state = "keep";
+ label = "ddimm44";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ reg = <13>;
+ default-state = "keep";
+ label = "ddimm45";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ reg = <14>;
+ default-state = "keep";
+ label = "ddimm46";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ reg = <15>;
+ default-state = "keep";
+ label = "ddimm47";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ led-controller@30 {
+ compatible = "ibm,pca9552";
+ reg = <0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "ddimm48";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "ddimm49";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "ddimm50";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "ddimm51";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "ddimm52";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "ddimm53";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "ddimm54";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "ddimm55";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "ddimm56";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "ddimm57";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "ddimm58";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "ddimm59";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ reg = <12>;
+ default-state = "keep";
+ label = "ddimm60";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ reg = <13>;
+ default-state = "keep";
+ label = "ddimm61";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ reg = <14>;
+ default-state = "keep";
+ label = "ddimm62";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ reg = <15>;
+ default-state = "keep";
+ label = "ddimm63";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ led-controller@34 {
+ compatible = "ibm,pca9552";
+ reg = <0x34>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "planar";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "tpm";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "cpu3-c61";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "cpu0-c14";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "opencapi-connector3";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "opencapi-connector4";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "opencapi-connector5";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "vrm4";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "vrm5";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "vrm6";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "vrm7";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ reg = <12>;
+ default-state = "keep";
+ label = "vrm12";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ reg = <13>;
+ default-state = "keep";
+ label = "vrm13";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ reg = <14>;
+ default-state = "keep";
+ label = "vrm14";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ reg = <15>;
+ default-state = "keep";
+ label = "vrm15";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ led-controller@35 {
+ compatible = "ibm,pca9552";
+ reg = <0x35>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "dasd-backplane";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "power-distribution";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "cpu1-c19";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "cpu2-c56";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "opencapi-connector0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "opencapi-connector1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "opencapi-connector2";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "vrm0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "vrm1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "vrm2";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "vrm3";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ reg = <12>;
+ default-state = "keep";
+ label = "vrm8";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ reg = <13>;
+ default-state = "keep";
+ label = "vrm9";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ reg = <14>;
+ default-state = "keep";
+ label = "vrm10";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ reg = <15>;
+ default-state = "keep";
+ label = "vrm11";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+};
+
+&i2c8 {
+ status = "okay";
+
+ pmic@11 {
+ compatible = "ti,ucd90320";
+ reg = <0x11>;
+ };
+
+ rtc@32 {
+ compatible = "epson,rx8900";
+ reg = <0x32>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+ reset-gpio = <&gpio0 ASPEED_GPIO(S, 5) GPIO_ACTIVE_LOW>;
+
+ i2c8mux0chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c8mux0chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&i2c9 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+
+ eeprom@53 {
+ compatible = "atmel,24c128";
+ reg = <0x53>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c128";
+ reg = <0x52>;
+ };
+};
+
+&i2c10 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ eeprom@53 {
+ compatible = "atmel,24c128";
+ reg = <0x53>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c128";
+ reg = <0x52>;
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ eeprom@53 {
+ compatible = "atmel,24c128";
+ reg = <0x53>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c128";
+ reg = <0x52>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+
+ tpm@2e {
+ compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+ reg = <0x2e>;
+ memory-region = <&event_log>;
+ };
+};
+
+&i2c13 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ eeprom@53 {
+ compatible = "atmel,24c128";
+ reg = <0x53>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c128";
+ reg = <0x52>;
+ };
+};
+
+&i2c14 {
+ multi-master;
+ status = "okay";
+
+ lcd-controller@62 {
+ compatible = "ibm,op-panel";
+ reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+ };
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ idle-state = <1>;
+
+ i2c14mux0chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c14mux0chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@51 {
+ compatible = "atmel,24c32";
+ reg = <0x51>;
+ };
+ };
+
+ i2c14mux0chn2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "front-sys-id0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "front-check-log0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "front-enc-fault1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "front-sys-pwron0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c14mux0chn3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pwm@52 {
+ compatible = "maxim,max31785a";
+ reg = <0x52>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "nvme0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "nvme1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "nvme2";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "nvme3";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "nvme4";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "nvme5";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "nvme6";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "nvme7";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "nvme8";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "nvme9";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "fan0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "fan1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ reg = <12>;
+ default-state = "keep";
+ label = "fan2";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ reg = <13>;
+ default-state = "keep";
+ label = "fan3";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ pca0: led-controller@61 {
+ compatible = "nxp,pca9552";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x61>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "","","","",
+ "","","","",
+ "","","","",
+ "presence-fan3",
+ "presence-fan2",
+ "presence-fan1",
+ "presence-fan0";
+ };
+ };
+ };
+
+ i2c-mux@71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c14mux1chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ };
+ };
+
+ i2c14mux1chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ };
+ };
+
+ i2c14mux1chn2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ };
+ };
+
+ i2c14mux1chn3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ };
+ };
+ };
+};
+
+&i2c15 {
+ status = "okay";
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c15mux0chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+
+ i2c15mux0chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+
+ i2c15mux0chn2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+
+ i2c15mux0chn3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+ };
+
+ i2c-mux@71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c15mux1chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+
+ i2c15mux1chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+
+ i2c15mux1chn2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+
+ i2c15mux1chn3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+ };
+
+ i2c-mux@72 {
+ compatible = "nxp,pca9546";
+ reg = <0x72>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c15mux2chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+
+ i2c15mux2chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+
+ i2c15mux2chn2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c15mux2chn3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
+
+&emmc_controller {
+ status = "okay";
+};
+
+&pinctrl_emmc_default {
+ bias-disable;
+};
+
+&emmc {
+ status = "okay";
+ clk-phase-mmc-hs200 = <210>, <228>;
+};
+
+&ibt {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&vuart1 {
+ status = "okay";
+};
+
+&vuart2 {
+ status = "okay";
+};
+
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+};
+
+&mac2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii3_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+ <&syscon ASPEED_CLK_MAC3RCLK>;
+ clock-names = "MACCLK", "RCLK";
+ use-ncsi;
+};
+
+&mac3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii4_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+ <&syscon ASPEED_CLK_MAC4RCLK>;
+ clock-names = "MACCLK", "RCLK";
+ use-ncsi;
+};
+
+&wdt1 {
+ aspeed,reset-type = "none";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+ status = "okay";
+};
+
+&xdma {
+ status = "okay";
+ memory-region = <&vga_memory>;
+};
+
+&kcs2 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca2>;
+ aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&fsi_hub0 {
+ cfam@4,0 { /* DCM2_C0 */
+ reg = <4 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <4>;
+
+ scom@1000 {
+ compatible = "ibm,p9-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,i2c-fsi";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam4_i2c0: i2c-bus@0 {
+ reg = <0>; /* OM01 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom500: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo500: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam4_i2c1: i2c-bus@1 {
+ reg = <1>; /* OM23 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom501: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo501: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam4_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom510: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo510: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam4_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom511: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo511: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam4_i2c12: i2c-bus@c {
+ reg = <12>; /* OP4A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom512: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo512: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam4_i2c13: i2c-bus@d {
+ reg = <13>; /* OP4B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom513: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo513: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam4_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom514: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo514: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam4_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom515: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo515: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam4_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam4_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam4_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam4_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+
+ occ {
+ compatible = "ibm,p10-occ";
+
+ hwmon {
+ compatible = "ibm,p10-occ-hwmon";
+ ibm,no-poll-on-init;
+ };
+ };
+ };
+
+ fsi@3400 {
+ compatible = "ibm,p9-fsi-controller";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-scan-on-init;
+ };
+ };
+
+ cfam@5,0 { /* DCM2_C1 */
+ reg = <5 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <5>;
+
+ scom@1000 {
+ compatible = "ibm,p9-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,i2c-fsi";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam5_i2c2: i2c-bus@2 {
+ reg = <2>; /* OM45 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom602: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo602: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam5_i2c3: i2c-bus@3 {
+ reg = <3>; /* OM67 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom603: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo603: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam5_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom610: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo610: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam5_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom611: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo611: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam5_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom614: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo614: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam5_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom615: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo615: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam5_i2c16: i2c-bus@10 {
+ reg = <16>; /* OP6A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom616: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo616: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam5_i2c17: i2c-bus@11 {
+ reg = <17>; /* OP6B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom617: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo617: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam5_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam5_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam5_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam5_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+
+ occ {
+ compatible = "ibm,p10-occ";
+
+ hwmon {
+ compatible = "ibm,p10-occ-hwmon";
+ ibm,no-poll-on-init;
+ };
+ };
+ };
+
+ fsi@3400 {
+ compatible = "ibm,p9-fsi-controller";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-scan-on-init;
+ };
+ };
+
+ cfam@6,0 { /* DCM3_C0 */
+ reg = <6 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <6>;
+
+ scom@1000 {
+ compatible = "ibm,p9-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,i2c-fsi";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam6_i2c0: i2c-bus@0 {
+ reg = <0>; /* OM01 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom700: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo700: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam6_i2c1: i2c-bus@1 {
+ reg = <1>; /* OM23 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom701: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo701: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam6_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom710: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo710: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam6_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom711: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo711: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam6_i2c12: i2c-bus@c {
+ reg = <12>; /* OP4A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom712: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo712: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam6_i2c13: i2c-bus@d {
+ reg = <13>; /* OP4B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom713: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo713: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam6_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom714: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo714: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam6_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom715: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo715: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam6_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam6_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam6_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam6_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+
+ occ {
+ compatible = "ibm,p10-occ";
+
+ hwmon {
+ compatible = "ibm,p10-occ-hwmon";
+ ibm,no-poll-on-init;
+ };
+ };
+ };
+
+ fsi@3400 {
+ compatible = "ibm,p9-fsi-controller";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-scan-on-init;
+ };
+ };
+
+ cfam@7,0 { /* DCM3_C1 */
+ reg = <7 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <7>;
+
+ scom@1000 {
+ compatible = "ibm,p9-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,i2c-fsi";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam7_i2c2: i2c-bus@2 {
+ reg = <2>; /* OM45 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom802: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo802: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam7_i2c3: i2c-bus@3 {
+ reg = <3>; /* OM67 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom803: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo803: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam7_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom810: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo810: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam7_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom811: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo811: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam7_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom814: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo814: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam7_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom815: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo815: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam7_i2c16: i2c-bus@10 {
+ reg = <16>; /* OP6A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom816: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo816: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam7_i2c17: i2c-bus@11 {
+ reg = <17>; /* OP6B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom817: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo817: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam7_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam7_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam7_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam7_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+
+ occ {
+ compatible = "ibm,p10-occ";
+
+ hwmon {
+ compatible = "ibm,p10-occ-hwmon";
+ ibm,no-poll-on-init;
+ };
+ };
+ };
+
+ fsi@3400 {
+ compatible = "ibm,p9-fsi-controller";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-scan-on-init;
+ };
+ };
+};
--
2.39.3
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
2024-05-22 19:25 [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems Eddie James
` (15 preceding siblings ...)
2024-05-22 19:25 ` [PATCH v6 16/20] ARM: dts: aspeed: Add IBM P11 Fuji " Eddie James
@ 2024-05-22 19:25 ` Eddie James
2024-05-23 12:48 ` kernel test robot
` (2 more replies)
2024-05-22 19:25 ` [PATCH v6 18/20] fsi: occ: Get device number from FSI minor number API Eddie James
` (4 subsequent siblings)
21 siblings, 3 replies; 51+ messages in thread
From: Eddie James @ 2024-05-22 19:25 UTC (permalink / raw)
To: linux-fsi
Cc: eajames, devicetree, linux-kernel, ninad, lakshmiy, linux-i2c,
linux-spi, linux-aspeed, andrew, joel, robh, conor+dt, krzk+dt,
andi.shyti, broonie
The Huygens is a Rainier with modifed FSI wiring.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../dts/aspeed/aspeed-bmc-ibm-huygens.dts | 23 +++++++++++++++++++
2 files changed, 24 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-huygens.dts
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index 5e3392621697a..ac2804c96554a 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -36,6 +36,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-ibm-bonnell.dtb \
aspeed-bmc-ibm-everest.dtb \
aspeed-bmc-ibm-fuji.dtb \
+ aspeed-bmc-ibm-huygens.dtb \
aspeed-bmc-ibm-rainier.dtb \
aspeed-bmc-ibm-rainier-1s4u.dtb \
aspeed-bmc-ibm-rainier-4u.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-huygens.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-huygens.dts
new file mode 100644
index 0000000000000..4a731b772fc0b
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-huygens.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-bmc-ibm-rainier.dts"
+
+/ {
+ model = "Huygens";
+};
+
+&fsim0 {
+ /delete-node/ cfam@0,0;
+ /delete-property/ cfam-reset-gpios;
+
+ bus-frequency = <100000000>;
+};
+
+&fsim1 {
+ #address-cells = <2>;
+ #size-cells = <0>;
+ status = "okay";
+ bus-frequency = <100000000>;
+};
--
2.39.3
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH v6 18/20] fsi: occ: Get device number from FSI minor number API
2024-05-22 19:25 [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems Eddie James
` (16 preceding siblings ...)
2024-05-22 19:25 ` [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens " Eddie James
@ 2024-05-22 19:25 ` Eddie James
2024-05-23 21:36 ` Ninad Palsule
2024-05-22 19:25 ` [PATCH v6 19/20] fsi: occ: Find next available child rather than node name match Eddie James
` (3 subsequent siblings)
21 siblings, 1 reply; 51+ messages in thread
From: Eddie James @ 2024-05-22 19:25 UTC (permalink / raw)
To: linux-fsi
Cc: eajames, devicetree, linux-kernel, ninad, lakshmiy, linux-i2c,
linux-spi, linux-aspeed, andrew, joel, robh, conor+dt, krzk+dt,
andi.shyti, broonie
Remove the IDA indexing for OCC devices and instead use the FSI
minor number API. This will make the OCC numbering consistent
with other FSI engines and make the "reg" device tree property
unnecessary.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
drivers/fsi/fsi-occ.c | 47 +++++++++----------------------------------
1 file changed, 9 insertions(+), 38 deletions(-)
diff --git a/drivers/fsi/fsi-occ.c b/drivers/fsi/fsi-occ.c
index da35ca9e84a6e..2023355b39805 100644
--- a/drivers/fsi/fsi-occ.c
+++ b/drivers/fsi/fsi-occ.c
@@ -4,9 +4,9 @@
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/fs.h>
+#include <linux/fsi.h>
#include <linux/fsi-sbefifo.h>
#include <linux/gfp.h>
-#include <linux/idr.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/miscdevice.h>
@@ -44,6 +44,7 @@ struct occ {
struct device *sbefifo;
char name[32];
int idx;
+ dev_t devt;
bool platform_hwmon;
u8 sequence_number;
void *buffer;
@@ -75,8 +76,6 @@ struct occ_client {
#define to_client(x) container_of((x), struct occ_client, xfr)
-static DEFINE_IDA(occ_ida);
-
static int occ_open(struct inode *inode, struct file *file)
{
struct occ_client *client = kzalloc(sizeof(*client), GFP_KERNEL);
@@ -622,7 +621,6 @@ static int occ_unregister_of_child(struct device *dev, void *data)
static int occ_probe(struct platform_device *pdev)
{
int rc;
- u32 reg;
char child_name[32];
struct occ *occ;
struct platform_device *hwmon_dev = NULL;
@@ -637,6 +635,10 @@ static int occ_probe(struct platform_device *pdev)
if (!occ)
return -ENOMEM;
+ rc = fsi_get_new_minor(to_fsi_dev(dev->parent), fsi_dev_occ, &occ->devt, &occ->idx);
+ if (rc)
+ return rc;
+
/* SBE words are always four bytes */
occ->buffer = kvmalloc(OCC_MAX_RESP_WORDS * 4, GFP_KERNEL);
if (!occ->buffer)
@@ -651,24 +653,6 @@ static int occ_probe(struct platform_device *pdev)
*/
occ->sequence_number = (u8)((jiffies % 0xff) + 1);
mutex_init(&occ->occ_lock);
-
- if (dev->of_node) {
- rc = of_property_read_u32(dev->of_node, "reg", ®);
- if (!rc) {
- /* make sure we don't have a duplicate from dts */
- occ->idx = ida_simple_get(&occ_ida, reg, reg + 1,
- GFP_KERNEL);
- if (occ->idx < 0)
- occ->idx = ida_simple_get(&occ_ida, 1, INT_MAX,
- GFP_KERNEL);
- } else {
- occ->idx = ida_simple_get(&occ_ida, 1, INT_MAX,
- GFP_KERNEL);
- }
- } else {
- occ->idx = ida_simple_get(&occ_ida, 1, INT_MAX, GFP_KERNEL);
- }
-
platform_set_drvdata(pdev, occ);
snprintf(occ->name, sizeof(occ->name), "occ%d", occ->idx);
@@ -680,7 +664,7 @@ static int occ_probe(struct platform_device *pdev)
rc = misc_register(&occ->mdev);
if (rc) {
dev_err(dev, "failed to register miscdevice: %d\n", rc);
- ida_simple_remove(&occ_ida, occ->idx);
+ fsi_free_minor(occ->devt);
kvfree(occ->buffer);
return rc;
}
@@ -719,7 +703,7 @@ static int occ_remove(struct platform_device *pdev)
else
device_for_each_child(&pdev->dev, NULL, occ_unregister_of_child);
- ida_simple_remove(&occ_ida, occ->idx);
+ fsi_free_minor(occ->devt);
return 0;
}
@@ -746,20 +730,7 @@ static struct platform_driver occ_driver = {
.remove = occ_remove,
};
-static int occ_init(void)
-{
- return platform_driver_register(&occ_driver);
-}
-
-static void occ_exit(void)
-{
- platform_driver_unregister(&occ_driver);
-
- ida_destroy(&occ_ida);
-}
-
-module_init(occ_init);
-module_exit(occ_exit);
+module_platform_driver(occ_driver);
MODULE_AUTHOR("Eddie James <eajames@linux.ibm.com>");
MODULE_DESCRIPTION("BMC P9 OCC driver");
--
2.39.3
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH v6 19/20] fsi: occ: Find next available child rather than node name match
2024-05-22 19:25 [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems Eddie James
` (17 preceding siblings ...)
2024-05-22 19:25 ` [PATCH v6 18/20] fsi: occ: Get device number from FSI minor number API Eddie James
@ 2024-05-22 19:25 ` Eddie James
2024-05-22 19:25 ` [PATCH v6 20/20] fsi: scom: Update compatible string to match documentation Eddie James
` (2 subsequent siblings)
21 siblings, 0 replies; 51+ messages in thread
From: Eddie James @ 2024-05-22 19:25 UTC (permalink / raw)
To: linux-fsi
Cc: eajames, devicetree, linux-kernel, ninad, lakshmiy, linux-i2c,
linux-spi, linux-aspeed, andrew, joel, robh, conor+dt, krzk+dt,
andi.shyti, broonie
There's no reason to restrict the creation of the hwmon device to
a matching child node name. Just get the first available one. There
should only be one child node anyway.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
drivers/fsi/fsi-occ.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/fsi/fsi-occ.c b/drivers/fsi/fsi-occ.c
index 2023355b39805..9a3658d863792 100644
--- a/drivers/fsi/fsi-occ.c
+++ b/drivers/fsi/fsi-occ.c
@@ -669,7 +669,7 @@ static int occ_probe(struct platform_device *pdev)
return rc;
}
- hwmon_node = of_get_child_by_name(dev->of_node, hwmon_dev_info.name);
+ hwmon_node = of_get_next_available_child(dev->of_node, NULL);
if (hwmon_node) {
snprintf(child_name, sizeof(child_name), "%s.%d", hwmon_dev_info.name, occ->idx);
hwmon_dev = of_platform_device_create(hwmon_node, child_name, dev);
--
2.39.3
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH v6 20/20] fsi: scom: Update compatible string to match documentation
2024-05-22 19:25 [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems Eddie James
` (18 preceding siblings ...)
2024-05-22 19:25 ` [PATCH v6 19/20] fsi: occ: Find next available child rather than node name match Eddie James
@ 2024-05-22 19:25 ` Eddie James
2024-05-23 21:29 ` Ninad Palsule
2024-05-23 21:31 ` [PATCH v6 19/20] fsi: occ: Find next available child rather than node name match Ninad Palsule
2024-06-05 15:47 ` [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems Eddie James
2024-07-08 13:47 ` Rob Herring
21 siblings, 2 replies; 51+ messages in thread
From: Eddie James @ 2024-05-22 19:25 UTC (permalink / raw)
To: linux-fsi
Cc: eajames, devicetree, linux-kernel, ninad, lakshmiy, linux-i2c,
linux-spi, linux-aspeed, andrew, joel, robh, conor+dt, krzk+dt,
andi.shyti, broonie
Use p9-scom instead of fsi2pib.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
drivers/fsi/fsi-scom.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/fsi/fsi-scom.c b/drivers/fsi/fsi-scom.c
index 61dbda9dbe2b0..4558b96474e09 100644
--- a/drivers/fsi/fsi-scom.c
+++ b/drivers/fsi/fsi-scom.c
@@ -590,6 +590,7 @@ static int scom_remove(struct device *dev)
static const struct of_device_id scom_of_ids[] = {
{ .compatible = "ibm,fsi2pib" },
+ { .compatible = "ibm,p9-scom" },
{ }
};
MODULE_DEVICE_TABLE(of, scom_of_ids);
--
2.39.3
^ permalink raw reply related [flat|nested] 51+ messages in thread
* Re: [PATCH v6 06/20] dt-bindings: fsi: Document the FSI controller common properties
2024-05-22 19:25 ` [PATCH v6 06/20] dt-bindings: fsi: Document the FSI controller common properties Eddie James
@ 2024-05-23 6:57 ` Krzysztof Kozlowski
0 siblings, 0 replies; 51+ messages in thread
From: Krzysztof Kozlowski @ 2024-05-23 6:57 UTC (permalink / raw)
To: Eddie James, linux-fsi
Cc: devicetree, linux-kernel, ninad, lakshmiy, linux-i2c, linux-spi,
linux-aspeed, andrew, joel, robh, conor+dt, krzk+dt, andi.shyti,
broonie
On 22/05/2024 21:25, Eddie James wrote:
> Since there are multiple FSI controllers documented, the common
> properties should be documented separately and then referenced
> from the specific controller documentation. Add bus-frequency for
> the FSI bus and CFAM local bus frequencies. Add interrupt
> controller properties.
>
> Signed-off-by: Eddie James <eajames@linux.ibm.com>
> ---
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v6 11/20] dt-bindings: i2c: i2c-fsi: Convert to json-schema
2024-05-22 19:25 ` [PATCH v6 11/20] dt-bindings: i2c: i2c-fsi: Convert to json-schema Eddie James
@ 2024-05-23 6:59 ` Krzysztof Kozlowski
2024-05-28 14:52 ` Ninad Palsule
1 sibling, 0 replies; 51+ messages in thread
From: Krzysztof Kozlowski @ 2024-05-23 6:59 UTC (permalink / raw)
To: Eddie James, linux-fsi
Cc: devicetree, linux-kernel, ninad, lakshmiy, linux-i2c, linux-spi,
linux-aspeed, andrew, joel, robh, conor+dt, krzk+dt, andi.shyti,
broonie
On 22/05/2024 21:25, Eddie James wrote:
> Convert to json-schema for the FSI-attached I2C controller.
>
> Signed-off-by: Eddie James <eajames@linux.ibm.com>
> ---
> Changes since v5:
> - Use more specific regex for node names
>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v6 03/20] dt-bindings: fsi: Document the IBM SCOM engine
2024-05-22 19:25 ` [PATCH v6 03/20] dt-bindings: fsi: Document the IBM SCOM engine Eddie James
@ 2024-05-23 9:28 ` Markus Elfring
2024-05-23 9:43 ` Conor Dooley
0 siblings, 1 reply; 51+ messages in thread
From: Markus Elfring @ 2024-05-23 9:28 UTC (permalink / raw)
To: Eddie James, linux-fsi, linux-aspeed, devicetree, linux-i2c,
linux-spi, kernel-janitors
Cc: LKML, Andi Shyti, Andrew Jeffery, Conor Dooley, Joel Stanley,
Krzysztof Kozlowski, Lakshmi Yadlapati, Mark Brown, Ninad Palsule,
Rob Herring
> The SCOM engine provides an interface to the POWER processor PIB
> (Pervasive Interconnect Bus).
Please improve this change description with a corresponding imperative wording.
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/process/submitting-patches.rst?h=v6.9#n94
Regards,
Markus
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v6 03/20] dt-bindings: fsi: Document the IBM SCOM engine
2024-05-23 9:28 ` Markus Elfring
@ 2024-05-23 9:43 ` Conor Dooley
2024-05-23 11:05 ` [v6 " Markus Elfring
0 siblings, 1 reply; 51+ messages in thread
From: Conor Dooley @ 2024-05-23 9:43 UTC (permalink / raw)
To: Markus Elfring
Cc: Eddie James, linux-fsi, linux-aspeed, devicetree, linux-i2c,
linux-spi, kernel-janitors, LKML, Andi Shyti, Andrew Jeffery,
Conor Dooley, Joel Stanley, Krzysztof Kozlowski,
Lakshmi Yadlapati, Mark Brown, Ninad Palsule, Rob Herring
[-- Attachment #1: Type: text/plain, Size: 420 bytes --]
On Thu, May 23, 2024 at 11:28:13AM +0200, Markus Elfring wrote:
> > The SCOM engine provides an interface to the POWER processor PIB
> > (Pervasive Interconnect Bus).
>
> Please improve this change description with a corresponding imperative wording.
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/process/submitting-patches.rst?h=v6.9#n94
The tense used here is fine.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [v6 03/20] dt-bindings: fsi: Document the IBM SCOM engine
2024-05-23 9:43 ` Conor Dooley
@ 2024-05-23 11:05 ` Markus Elfring
0 siblings, 0 replies; 51+ messages in thread
From: Markus Elfring @ 2024-05-23 11:05 UTC (permalink / raw)
To: Conor Dooley, Eddie James, linux-fsi, linux-aspeed, devicetree,
linux-i2c, linux-spi, kernel-janitors
Cc: LKML, Andi Shyti, Andrew Jeffery, Conor Dooley, Joel Stanley,
Krzysztof Kozlowski, Lakshmi Yadlapati, Mark Brown, Ninad Palsule,
Rob Herring
>>> The SCOM engine provides an interface to the POWER processor PIB
>>> (Pervasive Interconnect Bus).
>>
>> Please improve this change description with a corresponding imperative wording.
>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/process/submitting-patches.rst?h=v6.9#n94
>
> The tense used here is fine.
Is the imperative mood preferred for the final commit message (besides the summary phrase)?
Regards,
Markus
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
2024-05-22 19:25 ` [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens " Eddie James
@ 2024-05-23 12:48 ` kernel test robot
2024-05-23 19:07 ` Eddie James
2024-05-23 18:45 ` Markus Elfring
2024-05-23 21:38 ` [PATCH v6 " Ninad Palsule
2 siblings, 1 reply; 51+ messages in thread
From: kernel test robot @ 2024-05-23 12:48 UTC (permalink / raw)
To: Eddie James, linux-fsi
Cc: oe-kbuild-all, eajames, devicetree, linux-kernel, ninad, lakshmiy,
linux-i2c, linux-spi, linux-aspeed, andrew, joel, robh, conor+dt,
krzk+dt, andi.shyti, broonie
Hi Eddie,
kernel test robot noticed the following build errors:
[auto build test ERROR on andi-shyti/i2c/i2c-host]
[also build test ERROR on linus/master v6.9 next-20240523]
[cannot apply to robh/for-next broonie-spi/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Eddie-James/spi-dt-bindings-Document-the-IBM-FSI-attached-SPI-controller/20240523-033334
base: git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux.git i2c/i2c-host
patch link: https://lore.kernel.org/r/20240522192524.3286237-18-eajames%40linux.ibm.com
patch subject: [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
config: arm-randconfig-001-20240523 (https://download.01.org/0day-ci/archive/20240523/202405232008.olE9azVd-lkp@intel.com/config)
compiler: arm-linux-gnueabi-gcc (GCC) 13.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240523/202405232008.olE9azVd-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202405232008.olE9azVd-lkp@intel.com/
All errors (new ones prefixed by >>):
>> Error: arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-huygens.dts:13.2-37 Properties must precede subnodes
FATAL ERROR: Unable to parse input tree
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v6 04/20] dt-bindings: fsi: p9-occ: Convert to json-schema
2024-05-22 19:25 ` [PATCH v6 04/20] dt-bindings: fsi: p9-occ: Convert to json-schema Eddie James
@ 2024-05-23 15:37 ` Markus Elfring
0 siblings, 0 replies; 51+ messages in thread
From: Markus Elfring @ 2024-05-23 15:37 UTC (permalink / raw)
To: Eddie James, linux-fsi, linux-aspeed, devicetree, linux-i2c,
linux-spi
Cc: LKML, Andi Shyti, Andrew Jeffery, Conor Dooley, Joel Stanley,
Krzysztof Kozlowski, Lakshmi Yadlapati, Mark Brown, Ninad Palsule,
Rob Herring
> Conver to json-schema for the OCC documentation. …
Convert?
Regards,
Markus
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v6 05/20] dt-bindings: fsi: Document the IBM SBEFIFO engine
2024-05-22 19:25 ` [PATCH v6 05/20] dt-bindings: fsi: Document the IBM SBEFIFO engine Eddie James
@ 2024-05-23 15:55 ` Markus Elfring
0 siblings, 0 replies; 51+ messages in thread
From: Markus Elfring @ 2024-05-23 15:55 UTC (permalink / raw)
To: Eddie James, linux-fsi, linux-aspeed, devicetree, linux-i2c,
linux-spi, kernel-janitors, Andrew Jeffery, Conor Dooley
Cc: LKML, Andi Shyti, Joel Stanley, Krzysztof Kozlowski,
Lakshmi Yadlapati, Mark Brown, Ninad Palsule, Rob Herring
> The SBEFIFO engine provides an interface to the POWER processor
> Self Boot Engine (SBE).
Under which circumstances will imperative wordings be applied for
another improved change description?
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/process/submitting-patches.rst?h=v6.9#n94
Regards,
Markus
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
2024-05-22 19:25 ` [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens " Eddie James
2024-05-23 12:48 ` kernel test robot
@ 2024-05-23 18:45 ` Markus Elfring
2024-05-23 19:00 ` Eddie James
2024-05-23 21:38 ` [PATCH v6 " Ninad Palsule
2 siblings, 1 reply; 51+ messages in thread
From: Markus Elfring @ 2024-05-23 18:45 UTC (permalink / raw)
To: Eddie James, linux-fsi, linux-aspeed, devicetree, linux-i2c,
linux-spi, kernel-janitors
Cc: LKML, Andi Shyti, Andrew Jeffery, Conor Dooley, Joel Stanley,
Krzysztof Kozlowski, Lakshmi Yadlapati, Mark Brown, Ninad Palsule,
Rob Herring
> The Huygens is a Rainier with modifed FSI wiring.
Will imperative wordings become helpful for a better commit message here?
Regards,
Markus
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
2024-05-23 18:45 ` Markus Elfring
@ 2024-05-23 19:00 ` Eddie James
2024-05-23 19:30 ` [v6 " Markus Elfring
2024-05-23 20:24 ` [PATCH v6 " Krzysztof Kozlowski
0 siblings, 2 replies; 51+ messages in thread
From: Eddie James @ 2024-05-23 19:00 UTC (permalink / raw)
To: Markus Elfring, linux-fsi, linux-aspeed, devicetree, linux-i2c,
linux-spi, kernel-janitors
Cc: LKML, Andi Shyti, Andrew Jeffery, Conor Dooley, Joel Stanley,
Krzysztof Kozlowski, Lakshmi Yadlapati, Mark Brown, Ninad Palsule,
Rob Herring
On 5/23/24 13:45, Markus Elfring wrote:
>> The Huygens is a Rainier with modifed FSI wiring.
> Will imperative wordings become helpful for a better commit message here?
This statement is a description of hardware. I cannot word that
imperatively. The commit message is imperative - "Add Huygens system".
>
> Regards,
> Markus
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
2024-05-23 12:48 ` kernel test robot
@ 2024-05-23 19:07 ` Eddie James
0 siblings, 0 replies; 51+ messages in thread
From: Eddie James @ 2024-05-23 19:07 UTC (permalink / raw)
To: linux-fsi
Cc: oe-kbuild-all, devicetree, linux-kernel, ninad, lakshmiy,
linux-i2c, linux-spi, linux-aspeed, andrew, joel, robh, conor+dt,
krzk+dt, andi.shyti, broonie
On 5/23/24 07:48, kernel test robot wrote:
> Hi Eddie,
>
> kernel test robot noticed the following build errors:
Silly mistake. If this patch can be dropped from the series, I can send
an updated Huygens DTS after this series is merged, unless I need to do
a v7.
Thanks,
Eddie
>
> [auto build test ERROR on andi-shyti/i2c/i2c-host]
> [also build test ERROR on linus/master v6.9 next-20240523]
> [cannot apply to robh/for-next broonie-spi/for-next]
> [If your patch is applied to the wrong git tree, kindly drop us a note.
> And when submitting patch, we suggest to use '--base' as documented in
> https://git-scm.com/docs/git-format-patch#_base_tree_information]
>
> url: https://github.com/intel-lab-lkp/linux/commits/Eddie-James/spi-dt-bindings-Document-the-IBM-FSI-attached-SPI-controller/20240523-033334
> base: git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux.git i2c/i2c-host
> patch link: https://lore.kernel.org/r/20240522192524.3286237-18-eajames%40linux.ibm.com
> patch subject: [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
> config: arm-randconfig-001-20240523 (https://download.01.org/0day-ci/archive/20240523/202405232008.olE9azVd-lkp@intel.com/config)
> compiler: arm-linux-gnueabi-gcc (GCC) 13.2.0
> reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240523/202405232008.olE9azVd-lkp@intel.com/reproduce)
>
> If you fix the issue in a separate patch/commit (i.e. not just a new version of
> the same patch/commit), kindly add following tags
> | Reported-by: kernel test robot <lkp@intel.com>
> | Closes: https://lore.kernel.org/oe-kbuild-all/202405232008.olE9azVd-lkp@intel.com/
>
> All errors (new ones prefixed by >>):
>
>>> Error: arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-huygens.dts:13.2-37 Properties must precede subnodes
> FATAL ERROR: Unable to parse input tree
>
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
2024-05-23 19:00 ` Eddie James
@ 2024-05-23 19:30 ` Markus Elfring
2024-05-23 19:33 ` Conor Dooley
2024-05-23 20:24 ` [PATCH v6 " Krzysztof Kozlowski
1 sibling, 1 reply; 51+ messages in thread
From: Markus Elfring @ 2024-05-23 19:30 UTC (permalink / raw)
To: Eddie James, linux-fsi, linux-aspeed, devicetree, linux-i2c,
linux-spi, kernel-janitors
Cc: LKML, Andi Shyti, Andrew Jeffery, Conor Dooley, Joel Stanley,
Krzysztof Kozlowski, Lakshmi Yadlapati, Mark Brown, Ninad Palsule,
Rob Herring
>>> The Huygens is a Rainier with modifed FSI wiring.
>> Will imperative wordings become helpful for a better commit message here?
>
>
> This statement is a description of hardware. I cannot word that imperatively.
Please take another look at corresponding improvement possibilities.
> The commit message is imperative - "Add Huygens system".
This information fits to the summary phrase.
Would you like to mention in the changelog that a hardware description
should be extended anyhow?
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/process/submitting-patches.rst?h=v6.9#n94
Regards,
Markus
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
2024-05-23 19:30 ` [v6 " Markus Elfring
@ 2024-05-23 19:33 ` Conor Dooley
2024-05-23 19:46 ` Markus Elfring
0 siblings, 1 reply; 51+ messages in thread
From: Conor Dooley @ 2024-05-23 19:33 UTC (permalink / raw)
To: Markus Elfring
Cc: Eddie James, linux-fsi, linux-aspeed, devicetree, linux-i2c,
linux-spi, kernel-janitors, LKML, Andi Shyti, Andrew Jeffery,
Conor Dooley, Joel Stanley, Krzysztof Kozlowski,
Lakshmi Yadlapati, Mark Brown, Ninad Palsule, Rob Herring
[-- Attachment #1: Type: text/plain, Size: 856 bytes --]
Markus,
On Thu, May 23, 2024 at 09:30:55PM +0200, Markus Elfring wrote:
> >>> The Huygens is a Rainier with modifed FSI wiring.
> >> Will imperative wordings become helpful for a better commit message here?
> >
> >
> > This statement is a description of hardware. I cannot word that imperatively.
>
> Please take another look at corresponding improvement possibilities.
>
>
> > The commit message is imperative - "Add Huygens system".
>
> This information fits to the summary phrase.
>
> Would you like to mention in the changelog that a hardware description
> should be extended anyhow?
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/process/submitting-patches.rst?h=v6.9#n94
You are talking absolute crap here. Stop harassing contributors with
your inane comments.
Thanks,
Conor.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
2024-05-23 19:33 ` Conor Dooley
@ 2024-05-23 19:46 ` Markus Elfring
2024-05-23 20:33 ` Al Viro
0 siblings, 1 reply; 51+ messages in thread
From: Markus Elfring @ 2024-05-23 19:46 UTC (permalink / raw)
To: Conor Dooley, linux-fsi, linux-aspeed, devicetree, linux-i2c,
linux-spi, kernel-janitors
Cc: Eddie James, LKML, Andi Shyti, Andrew Jeffery, Conor Dooley,
Joel Stanley, Krzysztof Kozlowski, Lakshmi Yadlapati, Mark Brown,
Ninad Palsule, Rob Herring
>> Would you like to mention in the changelog that a hardware description
>> should be extended anyhow?
>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/process/submitting-patches.rst?h=v6.9#n94
>
> You are talking absolute crap here. Stop harassing contributors with
> your inane comments.
Why do you interpret my patch review contributions in this direction
when the official Linux development documentation provides special advice
on affected wording details?
Regards,
Markus
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
2024-05-23 19:00 ` Eddie James
2024-05-23 19:30 ` [v6 " Markus Elfring
@ 2024-05-23 20:24 ` Krzysztof Kozlowski
2024-05-23 20:33 ` [v6 " Markus Elfring
1 sibling, 1 reply; 51+ messages in thread
From: Krzysztof Kozlowski @ 2024-05-23 20:24 UTC (permalink / raw)
To: Eddie James, Markus Elfring, linux-fsi, linux-aspeed, devicetree,
linux-i2c, linux-spi, kernel-janitors
Cc: LKML, Andi Shyti, Andrew Jeffery, Conor Dooley, Joel Stanley,
Lakshmi Yadlapati, Mark Brown, Ninad Palsule, Rob Herring
On 23/05/2024 21:00, Eddie James wrote:
>
> On 5/23/24 13:45, Markus Elfring wrote:
>>> The Huygens is a Rainier with modifed FSI wiring.
>> Will imperative wordings become helpful for a better commit message here?
>
>
> This statement is a description of hardware. I cannot word that
> imperatively. The commit message is imperative - "Add Huygens system".
Feel free to ignore all comments coming from Markus (or implement,
entirely up to you).
Markus is banned from mailing lists and most of maintainers already
ignore him or already marked as spam.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
2024-05-23 20:24 ` [PATCH v6 " Krzysztof Kozlowski
@ 2024-05-23 20:33 ` Markus Elfring
0 siblings, 0 replies; 51+ messages in thread
From: Markus Elfring @ 2024-05-23 20:33 UTC (permalink / raw)
To: Krzysztof Kozlowski, Eddie James, linux-fsi, linux-aspeed,
devicetree, linux-i2c, linux-spi, kernel-janitors
Cc: LKML, Andi Shyti, Andrew Jeffery, Conor Dooley, Joel Stanley,
Lakshmi Yadlapati, Mark Brown, Ninad Palsule, Rob Herring
> Markus is banned from mailing lists and most of maintainers already
> ignore him or already marked as spam.
The running patch review can eventually become more constructive
despite of recurring communication difficulties.
Regards,
Markus
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
2024-05-23 19:46 ` Markus Elfring
@ 2024-05-23 20:33 ` Al Viro
2024-05-24 6:38 ` Markus Elfring
0 siblings, 1 reply; 51+ messages in thread
From: Al Viro @ 2024-05-23 20:33 UTC (permalink / raw)
To: Markus Elfring
Cc: Conor Dooley, linux-fsi, linux-aspeed, devicetree, linux-i2c,
linux-spi, kernel-janitors, Eddie James, LKML, Andi Shyti,
Andrew Jeffery, Conor Dooley, Joel Stanley, Krzysztof Kozlowski,
Lakshmi Yadlapati, Mark Brown, Ninad Palsule, Rob Herring
On Thu, May 23, 2024 at 09:46:48PM +0200, Markus Elfring wrote:
> >> Would you like to mention in the changelog that a hardware description
> >> should be extended anyhow?
> >> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/process/submitting-patches.rst?h=v6.9#n94
> >
> > You are talking absolute crap here. Stop harassing contributors with
> > your inane comments.
>
> Why do you interpret my patch review contributions in this direction
> when the official Linux development documentation provides special advice
> on affected wording details?
Your "contributions" are garbage in general, and this thread is not an exception.
More specifically, you are picking an advice that is inapplicable, transforming
it into a question and "contributing" the result.
And your entire modus operandi fits that pattern - you spew random garbage and
expect the contributors to spend their time and efforts on checking if your
(contents-free) "advice" happens to make any sense.
That. Is. Worthless.
According to people who'd met you in person you *are* a member of our species,
and I can't exclude the possibility that in some other environments you might
be capable of sentience. Unfortunately, the kernel development is clearly
not among those.
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v6 20/20] fsi: scom: Update compatible string to match documentation
2024-05-22 19:25 ` [PATCH v6 20/20] fsi: scom: Update compatible string to match documentation Eddie James
@ 2024-05-23 21:29 ` Ninad Palsule
2024-05-23 21:31 ` [PATCH v6 19/20] fsi: occ: Find next available child rather than node name match Ninad Palsule
1 sibling, 0 replies; 51+ messages in thread
From: Ninad Palsule @ 2024-05-23 21:29 UTC (permalink / raw)
To: eajames
Cc: andi.shyti, andrew, broonie, conor+dt, devicetree, joel, krzk+dt,
lakshmiy, linux-aspeed, linux-fsi, linux-i2c, linux-kernel,
linux-spi, ninad, robh
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v6 19/20] fsi: occ: Find next available child rather than node name match
2024-05-22 19:25 ` [PATCH v6 20/20] fsi: scom: Update compatible string to match documentation Eddie James
2024-05-23 21:29 ` Ninad Palsule
@ 2024-05-23 21:31 ` Ninad Palsule
1 sibling, 0 replies; 51+ messages in thread
From: Ninad Palsule @ 2024-05-23 21:31 UTC (permalink / raw)
To: eajames
Cc: andi.shyti, andrew, broonie, conor+dt, devicetree, joel, krzk+dt,
lakshmiy, linux-aspeed, linux-fsi, linux-i2c, linux-kernel,
linux-spi, ninad, robh
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v6 18/20] fsi: occ: Get device number from FSI minor number API
2024-05-22 19:25 ` [PATCH v6 18/20] fsi: occ: Get device number from FSI minor number API Eddie James
@ 2024-05-23 21:36 ` Ninad Palsule
0 siblings, 0 replies; 51+ messages in thread
From: Ninad Palsule @ 2024-05-23 21:36 UTC (permalink / raw)
To: eajames
Cc: andi.shyti, andrew, broonie, conor+dt, devicetree, joel, krzk+dt,
lakshmiy, linux-aspeed, linux-fsi, linux-i2c, linux-kernel,
linux-spi, ninad, robh
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
2024-05-22 19:25 ` [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens " Eddie James
2024-05-23 12:48 ` kernel test robot
2024-05-23 18:45 ` Markus Elfring
@ 2024-05-23 21:38 ` Ninad Palsule
2 siblings, 0 replies; 51+ messages in thread
From: Ninad Palsule @ 2024-05-23 21:38 UTC (permalink / raw)
To: eajames
Cc: andi.shyti, andrew, broonie, conor+dt, devicetree, joel, krzk+dt,
lakshmiy, linux-aspeed, linux-fsi, linux-i2c, linux-kernel,
linux-spi, ninad, robh
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
2024-05-23 20:33 ` Al Viro
@ 2024-05-24 6:38 ` Markus Elfring
0 siblings, 0 replies; 51+ messages in thread
From: Markus Elfring @ 2024-05-24 6:38 UTC (permalink / raw)
To: Al Viro, linux-fsi, linux-aspeed, devicetree, linux-i2c,
linux-spi, kernel-janitors
Cc: Eddie James, LKML, Andi Shyti, Andrew Jeffery, Conor Dooley,
Joel Stanley, Krzysztof Kozlowski, Lakshmi Yadlapati, Mark Brown,
Ninad Palsule, Rob Herring
>> Why do you interpret my patch review contributions in this direction
>> when the official Linux development documentation provides special advice
>> on affected wording details?
>
> Your "contributions" are garbage in general,
My contributions are also varying (as usual) through the years.
> and this thread is not an exception.
It is just another example for involved communication challenges.
> More specifically, you are picking an advice
Some development activities are reminders according to known information sources.
> that is inapplicable,
> transforming it into a question and "contributing" the result.
>
> And your entire modus operandi fits that pattern - you spew random garbage and
> expect the contributors to spend their time and efforts on checking if your
> (contents-free) "advice" happens to make any sense.
Do you express special concerns here which can be reconsidered because of
advices and requirements from software development guidelines?
…
> Unfortunately, the kernel development is clearly
> not among those.
How does such a view fit to an other data representation?
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/log/?qt=author&q=Elfring
Regards,
Markus
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v6 15/20] ARM: dts: aspeed: Add IBM P11 Blueridge 4U BMC system
2024-05-22 19:25 ` [PATCH v6 15/20] ARM: dts: aspeed: Add IBM P11 Blueridge 4U " Eddie James
@ 2024-05-24 22:27 ` Ninad Palsule
0 siblings, 0 replies; 51+ messages in thread
From: Ninad Palsule @ 2024-05-24 22:27 UTC (permalink / raw)
To: Eddie James, linux-fsi
Cc: devicetree, linux-kernel, lakshmiy, linux-i2c, linux-spi,
linux-aspeed, andrew, joel, robh, conor+dt, krzk+dt, andi.shyti,
broonie
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
On 5/22/24 14:25, Eddie James wrote:
> The 4U Blueridge is identical to the Blueridge system but has two extra
> power supplies.
>
> Signed-off-by: Eddie James <eajames@linux.ibm.com>
> ---
> .../aspeed/aspeed-bmc-ibm-blueridge-4u.dts | 21 +++++++++++++++++++
> 1 file changed, 21 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge-4u.dts
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v6 12/20] dt-bindings: arm: aspeed: add IBM P11 BMC boards
2024-05-22 19:25 ` [PATCH v6 12/20] dt-bindings: arm: aspeed: add IBM P11 BMC boards Eddie James
@ 2024-05-28 14:24 ` Ninad Palsule
0 siblings, 0 replies; 51+ messages in thread
From: Ninad Palsule @ 2024-05-28 14:24 UTC (permalink / raw)
To: Eddie James, linux-fsi
Cc: devicetree, linux-kernel, lakshmiy, linux-i2c, linux-spi,
linux-aspeed, andrew, joel, robh, conor+dt, krzk+dt, andi.shyti,
broonie
Hi Eddie
On 5/22/24 14:25, Eddie James wrote:
> Document two new AST2600 BMC boards for IBM P11 systems.
>
> Signed-off-by: Eddie James <eajames@linux.ibm.com>
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
> index 95113df178cc5..e386d0ebfb14a 100644
> --- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
> +++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
> @@ -86,7 +86,9 @@ properties:
> - facebook,harma-bmc
> - facebook,minerva-cmc
> - facebook,yosemite4-bmc
> + - ibm,blueridge-bmc
> - ibm,everest-bmc
> + - ibm,fuji-bmc
> - ibm,rainier-bmc
> - ibm,system1-bmc
> - ibm,tacoma-bmc
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v6 16/20] ARM: dts: aspeed: Add IBM P11 Fuji BMC system
[not found] ` <3ac517f0-0394-4310-8840-d806de5ec082@linux.ibm.com>
@ 2024-05-28 14:47 ` Eddie James
0 siblings, 0 replies; 51+ messages in thread
From: Eddie James @ 2024-05-28 14:47 UTC (permalink / raw)
To: Ninad Palsule, linux-fsi
Cc: devicetree, linux-kernel, lakshmiy, linux-i2c, linux-spi,
linux-aspeed, andrew, joel, robh, conor+dt, krzk+dt, andi.shyti,
broonie
On 5/28/24 09:08, Ninad Palsule wrote:
>
> Hi Eddie,
>
>> +
>> + led@6 {
>> + reg = <6>;
>> + default-state = "keep";
>> + label = "opencapi-connector5";
>> + retain-state-shutdown;
>> + type = <PCA955X_TYPE_LED>;
>> + };
> is led@7 not connected?
Correct.
>> +
>> + led@8 {
>> + reg = <8>;
>> + default-state = "keep";
>> + label = "vrm4";
>> + retain-state-shutdown;
>> + type = <PCA955X_TYPE_LED>;
>> + };
>> +
>> + led@9 {
>> + reg = <9>;
>> + default-state = "keep";
>> + label = "vrm5";
>> + retain-state-shutdown;
>> + type = <PCA955X_TYPE_LED>;
>> + };
>> +
>> + led@10 {
>> + reg = <10>;
>> + default-state = "keep";
>> + label = "vrm6";
>> + retain-state-shutdown;
>> + type = <PCA955X_TYPE_LED>;
>> + };
>> +
>> + led@11 {
>> + reg = <11>;
>> + default-state = "keep";
>> + label = "vrm7";
>> + retain-state-shutdown;
>> + type = <PCA955X_TYPE_LED>;
>> + };
>> +
>> + led@12 {
>> + reg = <12>;
>> + default-state = "keep";
>> + label = "vrm12";
>> + retain-state-shutdown;
>> + type = <PCA955X_TYPE_LED>;
>> + };
> curious about label jump from vrm7 to vrm12.
vrm0-3 and 8-11 are on the previous pca chip. I believe this is correct
based on the wiring in the spec, though the numberings are really just
convention established by the guy who managed the LEDs on the system.
>> + cfam4_i2c10: i2c-bus@a {
>> + reg = <10>; /* OP3A */
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> It will be more readable to have "reg" value in hex too. I have seen similar stuff in this FSI nodes. It will be consistent with other places.
>> +
>
> Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
>
Sure, thanks!
Eddie
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v6 14/20] ARM: dts: aspeed: Add IBM P11 Blueridge BMC system
[not found] ` <dca4ac91-c18b-4271-a3f9-fbf3b5a3c43d@linux.ibm.com>
@ 2024-05-28 14:50 ` Eddie James
0 siblings, 0 replies; 51+ messages in thread
From: Eddie James @ 2024-05-28 14:50 UTC (permalink / raw)
To: Ninad Palsule, linux-fsi
Cc: devicetree, linux-kernel, lakshmiy, linux-i2c, linux-spi,
linux-aspeed, andrew, joel, robh, conor+dt, krzk+dt, andi.shyti,
broonie
On 5/24/24 17:47, Ninad Palsule wrote:
>> + led@6 {
>> + reg = <6>;
>> + default-state = "keep";
>> + label = "cpu-vrm1";
>> + retain-state-shutdown;
>> + type = <PCA955X_TYPE_LED>;
>> + };
>> +
> Is there a specific reason for skipping led@7? Its not connected?
Yes, again not connected.
>> + led@8 {
>> + reg = <8>;
>> + default-state = "keep";
>> + label = "lcd-russel";
>> + retain-state-shutdown;
>> + type = <PCA955X_TYPE_LED>;
>> + };
>> + };
>> +
>
> Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
>
Thanks,
Eddie
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v6 11/20] dt-bindings: i2c: i2c-fsi: Convert to json-schema
2024-05-22 19:25 ` [PATCH v6 11/20] dt-bindings: i2c: i2c-fsi: Convert to json-schema Eddie James
2024-05-23 6:59 ` Krzysztof Kozlowski
@ 2024-05-28 14:52 ` Ninad Palsule
1 sibling, 0 replies; 51+ messages in thread
From: Ninad Palsule @ 2024-05-28 14:52 UTC (permalink / raw)
To: Eddie James, linux-fsi
Cc: devicetree, linux-kernel, lakshmiy, linux-i2c, linux-spi,
linux-aspeed, andrew, joel, robh, conor+dt, krzk+dt, andi.shyti,
broonie
Hi Eddie,
On 5/22/24 14:25, Eddie James wrote:
> Convert to json-schema for the FSI-attached I2C controller.
>
> Signed-off-by: Eddie James <eajames@linux.ibm.com>
> ---
> Changes since v5:
> - Use more specific regex for node names
>
> .../devicetree/bindings/i2c/i2c-fsi.txt | 40 ----------
> .../devicetree/bindings/i2c/ibm,i2c-fsi.yaml | 76 +++++++++++++++++++
> MAINTAINERS | 2 +-
> 3 files changed, 77 insertions(+), 41 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-fsi.txt
> create mode 100644 Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Thanks & Regards,
Ninad
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems
2024-05-22 19:25 [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems Eddie James
` (19 preceding siblings ...)
2024-05-22 19:25 ` [PATCH v6 20/20] fsi: scom: Update compatible string to match documentation Eddie James
@ 2024-06-05 15:47 ` Eddie James
2024-06-06 1:31 ` Andrew Jeffery
2024-07-08 13:47 ` Rob Herring
21 siblings, 1 reply; 51+ messages in thread
From: Eddie James @ 2024-06-05 15:47 UTC (permalink / raw)
To: linux-fsi
Cc: devicetree, linux-kernel, ninad, lakshmiy, linux-i2c, linux-spi,
linux-aspeed, andrew, joel, robh, conor+dt, krzk+dt, andi.shyti,
broonie
On 5/22/24 14:25, Eddie James wrote:
> Add the Blueridge and Fuji BMC systems. Document many missing FSI related
> properties, and fix existing warnings. Make some minor fixes in OCC and
> SCOM drivers for the updated bindings.
Hi Joel/Andrew, what else needs to be fixed before this can be merged
(minus Huygens patch which I will resend)? I believe all the patches
have been reviewed.
Thanks,
Eddie
>
> Changes since v5:
> - Switch from clock-frequency to bus-frequency for common FSI controller
> properties
> - Add reg properties for AST2700 FSI controller
> - Fix patternProperties for i2c bus nodes under FSI-based I2C controller
> - Add bus-frequency for P11 FSI device tree node
> - Change model name from Blueridge to Blueridge 2U
> - Add missing reset gpio to led controller on Fuji
> - Add Huygens (Rainier with modified FSI wiring)
>
> Eddie James (20):
> spi: dt-bindings: Document the IBM FSI-attached SPI controller
> dt-bindings: fsi: fsi2spi: Document SPI controller child nodes
> dt-bindings: fsi: Document the IBM SCOM engine
> dt-bindings: fsi: p9-occ: Convert to json-schema
> dt-bindings: fsi: Document the IBM SBEFIFO engine
> dt-bindings: fsi: Document the FSI controller common properties
> dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller
> dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema
> dt-bindings: fsi: Document the AST2700 FSI controller
> dt-bindings: fsi: Document the FSI Hub Controller
> dt-bindings: i2c: i2c-fsi: Convert to json-schema
> dt-bindings: arm: aspeed: add IBM P11 BMC boards
> ARM: dts: aspeed: Add IBM P11 FSI devices
> ARM: dts: aspeed: Add IBM P11 Blueridge BMC system
> ARM: dts: aspeed: Add IBM P11 Blueridge 4U BMC system
> ARM: dts: aspeed: Add IBM P11 Fuji BMC system
> ARM: dts: aspeed: Add IBM Huygens BMC system
> fsi: occ: Get device number from FSI minor number API
> fsi: occ: Find next available child rather than node name match
> fsi: scom: Update compatible string to match documentation
>
> .../bindings/arm/aspeed/aspeed.yaml | 2 +
> .../fsi/aspeed,ast2600-fsi-master.yaml | 121 +
> .../bindings/fsi/fsi-controller.yaml | 66 +
> .../bindings/fsi/fsi-master-aspeed.txt | 36 -
> .../devicetree/bindings/fsi/ibm,fsi2spi.yaml | 36 +-
> .../bindings/fsi/ibm,i2cr-fsi-master.yaml | 5 +-
> .../bindings/fsi/ibm,p9-fsi-controller.yaml | 45 +
> .../devicetree/bindings/fsi/ibm,p9-occ.txt | 16 -
> .../devicetree/bindings/fsi/ibm,p9-occ.yaml | 40 +
> .../bindings/fsi/ibm,p9-sbefifo.yaml | 46 +
> .../devicetree/bindings/fsi/ibm,p9-scom.yaml | 37 +
> .../devicetree/bindings/i2c/i2c-fsi.txt | 40 -
> .../devicetree/bindings/i2c/ibm,i2c-fsi.yaml | 76 +
> .../devicetree/bindings/spi/ibm,spi-fsi.yaml | 55 +
> MAINTAINERS | 2 +-
> arch/arm/boot/dts/aspeed/Makefile | 3 +
> .../aspeed/aspeed-bmc-ibm-blueridge-4u.dts | 21 +
> .../dts/aspeed/aspeed-bmc-ibm-blueridge.dts | 1691 +++++++
> .../boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts | 3881 +++++++++++++++++
> .../dts/aspeed/aspeed-bmc-ibm-huygens.dts | 23 +
> .../arm/boot/dts/aspeed/ibm-power11-quad.dtsi | 1539 +++++++
> drivers/fsi/fsi-occ.c | 49 +-
> drivers/fsi/fsi-scom.c | 1 +
> 23 files changed, 7694 insertions(+), 137 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml
> create mode 100644 Documentation/devicetree/bindings/fsi/fsi-controller.yaml
> delete mode 100644 Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
> create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-fsi-controller.yaml
> delete mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
> create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml
> create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.yaml
> create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-scom.yaml
> delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-fsi.txt
> create mode 100644 Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml
> create mode 100644 Documentation/devicetree/bindings/spi/ibm,spi-fsi.yaml
> create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge-4u.dts
> create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts
> create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts
> create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-huygens.dts
> create mode 100644 arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi
>
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems
2024-06-05 15:47 ` [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems Eddie James
@ 2024-06-06 1:31 ` Andrew Jeffery
0 siblings, 0 replies; 51+ messages in thread
From: Andrew Jeffery @ 2024-06-06 1:31 UTC (permalink / raw)
To: Eddie James, linux-fsi
Cc: devicetree, linux-kernel, ninad, lakshmiy, linux-i2c, linux-spi,
linux-aspeed, joel, robh, conor+dt, krzk+dt, andi.shyti, broonie
Hi Eddie,
On Wed, 2024-06-05 at 10:47 -0500, Eddie James wrote:
> On 5/22/24 14:25, Eddie James wrote:
> > Add the Blueridge and Fuji BMC systems. Document many missing FSI related
> > properties, and fix existing warnings. Make some minor fixes in OCC and
> > SCOM drivers for the updated bindings.
>
>
> Hi Joel/Andrew, what else needs to be fixed before this can be merged
> (minus Huygens patch which I will resend)? I believe all the patches
> have been reviewed.
>
Firstly, thanks for your work here on the FSI bindings.
However, the series is a bit awkward, as it sandwiches Aspeed
devicetree patches that should go through Joel's bmc tree between the
bindings and driver fixes that should go through the FSI tree.
This is potentially less of a problem for Joel as he's the maintainer
for both, but it's not my place to be touching the FSI tree.
For now I've applied the dts patches and pushed them here after
dropping the Huygens patch:
https://github.com/amboar/linux/commits/for/bmc/dt-6.11/
But I would appreciate it if you split series by subsystem in the
future (see my comments on the other FSI series you have out for
review).
Andrew
>
> Thanks,
>
> Eddie
>
>
> >
> > Changes since v5:
> > - Switch from clock-frequency to bus-frequency for common FSI controller
> > properties
> > - Add reg properties for AST2700 FSI controller
> > - Fix patternProperties for i2c bus nodes under FSI-based I2C controller
> > - Add bus-frequency for P11 FSI device tree node
> > - Change model name from Blueridge to Blueridge 2U
> > - Add missing reset gpio to led controller on Fuji
> > - Add Huygens (Rainier with modified FSI wiring)
> >
> > Eddie James (20):
> > spi: dt-bindings: Document the IBM FSI-attached SPI controller
> > dt-bindings: fsi: fsi2spi: Document SPI controller child nodes
> > dt-bindings: fsi: Document the IBM SCOM engine
> > dt-bindings: fsi: p9-occ: Convert to json-schema
> > dt-bindings: fsi: Document the IBM SBEFIFO engine
> > dt-bindings: fsi: Document the FSI controller common properties
> > dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller
> > dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema
> > dt-bindings: fsi: Document the AST2700 FSI controller
> > dt-bindings: fsi: Document the FSI Hub Controller
> > dt-bindings: i2c: i2c-fsi: Convert to json-schema
> > dt-bindings: arm: aspeed: add IBM P11 BMC boards
> > ARM: dts: aspeed: Add IBM P11 FSI devices
> > ARM: dts: aspeed: Add IBM P11 Blueridge BMC system
> > ARM: dts: aspeed: Add IBM P11 Blueridge 4U BMC system
> > ARM: dts: aspeed: Add IBM P11 Fuji BMC system
> > ARM: dts: aspeed: Add IBM Huygens BMC system
> > fsi: occ: Get device number from FSI minor number API
> > fsi: occ: Find next available child rather than node name match
> > fsi: scom: Update compatible string to match documentation
> >
> > .../bindings/arm/aspeed/aspeed.yaml | 2 +
> > .../fsi/aspeed,ast2600-fsi-master.yaml | 121 +
> > .../bindings/fsi/fsi-controller.yaml | 66 +
> > .../bindings/fsi/fsi-master-aspeed.txt | 36 -
> > .../devicetree/bindings/fsi/ibm,fsi2spi.yaml | 36 +-
> > .../bindings/fsi/ibm,i2cr-fsi-master.yaml | 5 +-
> > .../bindings/fsi/ibm,p9-fsi-controller.yaml | 45 +
> > .../devicetree/bindings/fsi/ibm,p9-occ.txt | 16 -
> > .../devicetree/bindings/fsi/ibm,p9-occ.yaml | 40 +
> > .../bindings/fsi/ibm,p9-sbefifo.yaml | 46 +
> > .../devicetree/bindings/fsi/ibm,p9-scom.yaml | 37 +
> > .../devicetree/bindings/i2c/i2c-fsi.txt | 40 -
> > .../devicetree/bindings/i2c/ibm,i2c-fsi.yaml | 76 +
> > .../devicetree/bindings/spi/ibm,spi-fsi.yaml | 55 +
> > MAINTAINERS | 2 +-
> > arch/arm/boot/dts/aspeed/Makefile | 3 +
> > .../aspeed/aspeed-bmc-ibm-blueridge-4u.dts | 21 +
> > .../dts/aspeed/aspeed-bmc-ibm-blueridge.dts | 1691 +++++++
> > .../boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts | 3881 +++++++++++++++++
> > .../dts/aspeed/aspeed-bmc-ibm-huygens.dts | 23 +
> > .../arm/boot/dts/aspeed/ibm-power11-quad.dtsi | 1539 +++++++
> > drivers/fsi/fsi-occ.c | 49 +-
> > drivers/fsi/fsi-scom.c | 1 +
> > 23 files changed, 7694 insertions(+), 137 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml
> > create mode 100644 Documentation/devicetree/bindings/fsi/fsi-controller.yaml
> > delete mode 100644 Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
> > create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-fsi-controller.yaml
> > delete mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
> > create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml
> > create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.yaml
> > create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-scom.yaml
> > delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-fsi.txt
> > create mode 100644 Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml
> > create mode 100644 Documentation/devicetree/bindings/spi/ibm,spi-fsi.yaml
> > create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge-4u.dts
> > create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts
> > create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts
> > create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-huygens.dts
> > create mode 100644 arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi
> >
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems
2024-05-22 19:25 [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems Eddie James
` (20 preceding siblings ...)
2024-06-05 15:47 ` [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems Eddie James
@ 2024-07-08 13:47 ` Rob Herring
21 siblings, 0 replies; 51+ messages in thread
From: Rob Herring @ 2024-07-08 13:47 UTC (permalink / raw)
To: Eddie James
Cc: linux-fsi, devicetree, linux-kernel, ninad, lakshmiy, linux-i2c,
linux-spi, linux-aspeed, andrew, joel, conor+dt, krzk+dt,
andi.shyti, broonie
On Wed, May 22, 2024 at 02:25:04PM -0500, Eddie James wrote:
> Add the Blueridge and Fuji BMC systems. Document many missing FSI related
> properties, and fix existing warnings. Make some minor fixes in OCC and
> SCOM drivers for the updated bindings.
>
> Changes since v5:
> - Switch from clock-frequency to bus-frequency for common FSI controller
> properties
> - Add reg properties for AST2700 FSI controller
> - Fix patternProperties for i2c bus nodes under FSI-based I2C controller
> - Add bus-frequency for P11 FSI device tree node
> - Change model name from Blueridge to Blueridge 2U
> - Add missing reset gpio to led controller on Fuji
> - Add Huygens (Rainier with modified FSI wiring)
>
> Eddie James (20):
> spi: dt-bindings: Document the IBM FSI-attached SPI controller
> dt-bindings: fsi: fsi2spi: Document SPI controller child nodes
> dt-bindings: fsi: Document the IBM SCOM engine
> dt-bindings: fsi: p9-occ: Convert to json-schema
> dt-bindings: fsi: Document the IBM SBEFIFO engine
> dt-bindings: fsi: Document the FSI controller common properties
> dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller
> dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema
> dt-bindings: fsi: Document the AST2700 FSI controller
> dt-bindings: fsi: Document the FSI Hub Controller
> dt-bindings: i2c: i2c-fsi: Convert to json-schema
Looks like these haven't been applied, so I applied patches 2-11.
> dt-bindings: arm: aspeed: add IBM P11 BMC boards
> ARM: dts: aspeed: Add IBM P11 FSI devices
> ARM: dts: aspeed: Add IBM P11 Blueridge BMC system
> ARM: dts: aspeed: Add IBM P11 Blueridge 4U BMC system
> ARM: dts: aspeed: Add IBM P11 Fuji BMC system
> ARM: dts: aspeed: Add IBM Huygens BMC system
> fsi: occ: Get device number from FSI minor number API
> fsi: occ: Find next available child rather than node name match
> fsi: scom: Update compatible string to match documentation
^ permalink raw reply [flat|nested] 51+ messages in thread
end of thread, other threads:[~2024-07-08 13:47 UTC | newest]
Thread overview: 51+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-05-22 19:25 [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems Eddie James
2024-05-22 19:25 ` [PATCH v6 01/20] spi: dt-bindings: Document the IBM FSI-attached SPI controller Eddie James
2024-05-22 19:25 ` [PATCH v6 02/20] dt-bindings: fsi: fsi2spi: Document SPI controller child nodes Eddie James
2024-05-22 19:25 ` [PATCH v6 03/20] dt-bindings: fsi: Document the IBM SCOM engine Eddie James
2024-05-23 9:28 ` Markus Elfring
2024-05-23 9:43 ` Conor Dooley
2024-05-23 11:05 ` [v6 " Markus Elfring
2024-05-22 19:25 ` [PATCH v6 04/20] dt-bindings: fsi: p9-occ: Convert to json-schema Eddie James
2024-05-23 15:37 ` Markus Elfring
2024-05-22 19:25 ` [PATCH v6 05/20] dt-bindings: fsi: Document the IBM SBEFIFO engine Eddie James
2024-05-23 15:55 ` Markus Elfring
2024-05-22 19:25 ` [PATCH v6 06/20] dt-bindings: fsi: Document the FSI controller common properties Eddie James
2024-05-23 6:57 ` Krzysztof Kozlowski
2024-05-22 19:25 ` [PATCH v6 07/20] dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller Eddie James
2024-05-22 19:25 ` [PATCH v6 08/20] dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema Eddie James
2024-05-22 19:25 ` [PATCH v6 09/20] dt-bindings: fsi: Document the AST2700 FSI controller Eddie James
2024-05-22 19:25 ` [PATCH v6 10/20] dt-bindings: fsi: Document the FSI Hub Controller Eddie James
2024-05-22 19:25 ` [PATCH v6 11/20] dt-bindings: i2c: i2c-fsi: Convert to json-schema Eddie James
2024-05-23 6:59 ` Krzysztof Kozlowski
2024-05-28 14:52 ` Ninad Palsule
2024-05-22 19:25 ` [PATCH v6 12/20] dt-bindings: arm: aspeed: add IBM P11 BMC boards Eddie James
2024-05-28 14:24 ` Ninad Palsule
2024-05-22 19:25 ` [PATCH v6 13/20] ARM: dts: aspeed: Add IBM P11 FSI devices Eddie James
2024-05-22 19:25 ` [PATCH v6 14/20] ARM: dts: aspeed: Add IBM P11 Blueridge BMC system Eddie James
[not found] ` <dca4ac91-c18b-4271-a3f9-fbf3b5a3c43d@linux.ibm.com>
2024-05-28 14:50 ` Eddie James
2024-05-22 19:25 ` [PATCH v6 15/20] ARM: dts: aspeed: Add IBM P11 Blueridge 4U " Eddie James
2024-05-24 22:27 ` Ninad Palsule
2024-05-22 19:25 ` [PATCH v6 16/20] ARM: dts: aspeed: Add IBM P11 Fuji " Eddie James
[not found] ` <3ac517f0-0394-4310-8840-d806de5ec082@linux.ibm.com>
2024-05-28 14:47 ` Eddie James
2024-05-22 19:25 ` [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens " Eddie James
2024-05-23 12:48 ` kernel test robot
2024-05-23 19:07 ` Eddie James
2024-05-23 18:45 ` Markus Elfring
2024-05-23 19:00 ` Eddie James
2024-05-23 19:30 ` [v6 " Markus Elfring
2024-05-23 19:33 ` Conor Dooley
2024-05-23 19:46 ` Markus Elfring
2024-05-23 20:33 ` Al Viro
2024-05-24 6:38 ` Markus Elfring
2024-05-23 20:24 ` [PATCH v6 " Krzysztof Kozlowski
2024-05-23 20:33 ` [v6 " Markus Elfring
2024-05-23 21:38 ` [PATCH v6 " Ninad Palsule
2024-05-22 19:25 ` [PATCH v6 18/20] fsi: occ: Get device number from FSI minor number API Eddie James
2024-05-23 21:36 ` Ninad Palsule
2024-05-22 19:25 ` [PATCH v6 19/20] fsi: occ: Find next available child rather than node name match Eddie James
2024-05-22 19:25 ` [PATCH v6 20/20] fsi: scom: Update compatible string to match documentation Eddie James
2024-05-23 21:29 ` Ninad Palsule
2024-05-23 21:31 ` [PATCH v6 19/20] fsi: occ: Find next available child rather than node name match Ninad Palsule
2024-06-05 15:47 ` [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems Eddie James
2024-06-06 1:31 ` Andrew Jeffery
2024-07-08 13:47 ` Rob Herring
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).