From: Michael Straube <straube.linux@gmail.com>
To: gregkh@linuxfoundation.org
Cc: Larry.Finger@lwfinger.net, phil@philpotter.co.uk,
martin@kaiser.cx, fmdefrancesco@gmail.com,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
Michael Straube <straube.linux@gmail.com>
Subject: [PATCH 6/8] staging: r8188eu: use is_multicast_ether_addr in core/rtw_xmit.c
Date: Mon, 23 Aug 2021 14:01:04 +0200 [thread overview]
Message-ID: <20210823120106.9633-7-straube.linux@gmail.com> (raw)
In-Reply-To: <20210823120106.9633-1-straube.linux@gmail.com>
Use is_multicast_ether_addr instead of custom macro IS_MCAST, all
buffers are properly aligned.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
---
drivers/staging/r8188eu/core/rtw_xmit.c | 15 ++++++---------
1 file changed, 6 insertions(+), 9 deletions(-)
diff --git a/drivers/staging/r8188eu/core/rtw_xmit.c b/drivers/staging/r8188eu/core/rtw_xmit.c
index f242f3ffca70..b901d4398f03 100644
--- a/drivers/staging/r8188eu/core/rtw_xmit.c
+++ b/drivers/staging/r8188eu/core/rtw_xmit.c
@@ -411,7 +411,7 @@ static s32 update_attrib(struct adapter *padapter, struct sk_buff *pkt, struct p
struct sta_info *psta = NULL;
struct ethhdr etherhdr;
- int bmcast;
+ bool bmcast;
struct sta_priv *pstapriv = &padapter->stapriv;
struct security_priv *psecuritypriv = &padapter->securitypriv;
struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
@@ -472,7 +472,7 @@ static s32 update_attrib(struct adapter *padapter, struct sk_buff *pkt, struct p
if ((pattrib->ether_type == 0x0806) || (pattrib->ether_type == 0x888e) || (pattrib->dhcp_pkt == 1))
rtw_lps_ctrl_wk_cmd(padapter, LPS_CTRL_SPECIAL_PACKET, 1);
- bmcast = IS_MCAST(pattrib->ra);
+ bmcast = is_multicast_ether_addr(pattrib->ra);
/* get sta_info */
if (bmcast) {
@@ -597,7 +597,6 @@ static s32 xmitframe_addmic(struct adapter *padapter, struct xmit_frame *pxmitfr
struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
u8 priority[4] = {0x0, 0x0, 0x0, 0x0};
u8 hw_hdr_offset = 0;
- int bmcst = IS_MCAST(pattrib->ra);
if (pattrib->psta)
stainfo = pattrib->psta;
@@ -615,7 +614,7 @@ static s32 xmitframe_addmic(struct adapter *padapter, struct xmit_frame *pxmitfr
pframe = pxmitframe->buf_addr + hw_hdr_offset;
- if (bmcst) {
+ if (is_multicast_ether_addr(pattrib->ra)) {
if (!memcmp(psecuritypriv->dot118021XGrptxmickey[psecuritypriv->dot118021XGrpKeyid].skey, null_key, 16))
return _FAIL;
/* start to calculate the mic code */
@@ -715,12 +714,10 @@ s32 rtw_make_wlanhdr(struct adapter *padapter, u8 *hdr, struct pkt_attrib *pattr
struct sta_info *psta;
- int bmcst = IS_MCAST(pattrib->ra);
-
if (pattrib->psta) {
psta = pattrib->psta;
} else {
- if (bmcst) {
+ if (is_multicast_ether_addr(pattrib->ra)) {
psta = rtw_get_bcmc_stainfo(padapter);
} else {
psta = rtw_get_stainfo(&padapter->stapriv, pattrib->ra);
@@ -907,7 +904,7 @@ s32 rtw_xmitframe_coalesce(struct adapter *padapter, struct sk_buff *pkt, struct
struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
struct pkt_attrib *pattrib = &pxmitframe->attrib;
u8 *pbuf_start;
- s32 bmcst = IS_MCAST(pattrib->ra);
+ bool bmcst = is_multicast_ether_addr(pattrib->ra);
s32 res = _SUCCESS;
if (!pkt)
@@ -1801,7 +1798,7 @@ int xmitframe_enqueue_for_sleeping_sta(struct adapter *padapter, struct xmit_fra
struct sta_priv *pstapriv = &padapter->stapriv;
struct pkt_attrib *pattrib = &pxmitframe->attrib;
struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
- int bmcst = IS_MCAST(pattrib->ra);
+ bool bmcst = is_multicast_ether_addr(pattrib->ra);
if (!check_fwstate(pmlmepriv, WIFI_AP_STATE))
return ret;
--
2.32.0
next prev parent reply other threads:[~2021-08-23 12:02 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-23 12:00 [PATCH 0/8] staging: r8188eu: use is_multicast_ether_addr instead of IS_MCAST Michael Straube
2021-08-23 12:00 ` [PATCH 1/8] staging: r8188eu: ensure proper alignment for eth address buffers Michael Straube
2021-08-23 12:01 ` [PATCH 2/8] staging: r8188eu: use is_multicast_ether_addr in core/rtw_mlme.c Michael Straube
2021-08-23 12:01 ` [PATCH 3/8] staging: r8188eu: use is_multicast_ether_addr in core/rtw_mp.c Michael Straube
2021-08-23 12:01 ` [PATCH 4/8] staging: r8188eu: use is_multicast_ether_addr in core/rtw_recv.c Michael Straube
2021-08-23 12:01 ` [PATCH 5/8] staging: r8188eu: use is_multicast_ether_addr in core/rtw_security.c Michael Straube
2021-08-23 12:01 ` Michael Straube [this message]
2021-08-23 12:01 ` [PATCH 7/8] staging: r8188eu: use is_multicast_ether_addr in hal/rtl8188eu_xmit.c Michael Straube
2021-08-23 12:01 ` [PATCH 8/8] staging: r8188eu: use is_multicast_ether_addr in os_dep/recv_linux.c Michael Straube
2021-08-23 22:15 ` [PATCH 0/8] staging: r8188eu: use is_multicast_ether_addr instead of IS_MCAST Phillip Potter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210823120106.9633-7-straube.linux@gmail.com \
--to=straube.linux@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=fmdefrancesco@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=martin@kaiser.cx \
--cc=phil@philpotter.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).