From: Michael Straube <straube.linux@gmail.com>
To: gregkh@linuxfoundation.org
Cc: Larry.Finger@lwfinger.net, phil@philpotter.co.uk,
martin@kaiser.cx, fmdefrancesco@gmail.com,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
Michael Straube <straube.linux@gmail.com>
Subject: [PATCH v2 1/3] staging: r8188eu: remove if_ether.h header file
Date: Tue, 24 Aug 2021 14:36:19 +0200 [thread overview]
Message-ID: <20210824123621.10801-2-straube.linux@gmail.com> (raw)
In-Reply-To: <20210824123621.10801-1-straube.linux@gmail.com>
All constants, declarations and macros in if_ether.h are either
duplicated from <uapi/linux/if_ether.h> or unused. Remove the file
if_ether.h and its includes.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
---
drivers/staging/r8188eu/core/rtw_recv.c | 1 -
drivers/staging/r8188eu/hal/rtl8188eu_recv.c | 1 -
drivers/staging/r8188eu/include/if_ether.h | 94 --------------------
drivers/staging/r8188eu/os_dep/xmit_linux.c | 1 -
4 files changed, 97 deletions(-)
delete mode 100644 drivers/staging/r8188eu/include/if_ether.h
diff --git a/drivers/staging/r8188eu/core/rtw_recv.c b/drivers/staging/r8188eu/core/rtw_recv.c
index 52236bae8693..08066c9587f9 100644
--- a/drivers/staging/r8188eu/core/rtw_recv.c
+++ b/drivers/staging/r8188eu/core/rtw_recv.c
@@ -8,7 +8,6 @@
#include "../include/recv_osdep.h"
#include "../include/mlme_osdep.h"
#include "../include/ip.h"
-#include "../include/if_ether.h"
#include "../include/ethernet.h"
#include "../include/usb_ops.h"
#include "../include/wifi.h"
diff --git a/drivers/staging/r8188eu/hal/rtl8188eu_recv.c b/drivers/staging/r8188eu/hal/rtl8188eu_recv.c
index a44c9598186c..3a2c7090cd7b 100644
--- a/drivers/staging/r8188eu/hal/rtl8188eu_recv.c
+++ b/drivers/staging/r8188eu/hal/rtl8188eu_recv.c
@@ -7,7 +7,6 @@
#include "../include/recv_osdep.h"
#include "../include/mlme_osdep.h"
#include "../include/ip.h"
-#include "../include/if_ether.h"
#include "../include/ethernet.h"
#include "../include/usb_ops.h"
diff --git a/drivers/staging/r8188eu/include/if_ether.h b/drivers/staging/r8188eu/include/if_ether.h
deleted file mode 100644
index 5bb79fddeec6..000000000000
--- a/drivers/staging/r8188eu/include/if_ether.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
-/* Copyright(c) 2007 - 2011 Realtek Corporation. */
-
-#ifndef _LINUX_IF_ETHER_H
-#define _LINUX_IF_ETHER_H
-
-/*
- * IEEE 802.3 Ethernet magic constants. The frame sizes omit the preamble
- * and FCS/CRC (frame check sequence).
- */
-
-#define ETH_ALEN 6 /* Octets in one ethernet addr */
-#define ETH_HLEN 14 /* Total octets in header. */
-#define ETH_ZLEN 60 /* Min. octets in frame sans FCS */
-#define ETH_DATA_LEN 1500 /* Max. octets in payload */
-#define ETH_FRAME_LEN 1514 /* Max. octets in frame sans FCS */
-
-/*
- * These are the defined Ethernet Protocol ID's.
- */
-
-#define ETH_P_LOOP 0x0060 /* Ethernet Loopback packet */
-#define ETH_P_PUP 0x0200 /* Xerox PUP packet */
-#define ETH_P_PUPAT 0x0201 /* Xerox PUP Addr Trans packet */
-#define ETH_P_IP 0x0800 /* Internet Protocol packet */
-#define ETH_P_X25 0x0805 /* CCITT X.25 */
-#define ETH_P_ARP 0x0806 /* Address Resolution packet */
-#define ETH_P_BPQ 0x08FF /* G8BPQ AX.25 Ethernet Packet */
-#define ETH_P_IEEEPUP 0x0a00 /* Xerox IEEE802.3 PUP packet */
-#define ETH_P_IEEEPUPAT 0x0a01 /* Xerox IEEE802.3 PUP */
-#define ETH_P_DEC 0x6000 /* DEC Assigned proto */
-#define ETH_P_DNA_DL 0x6001 /* DEC DNA Dump/Load */
-#define ETH_P_DNA_RC 0x6002 /* DEC DNA Remote Console */
-#define ETH_P_DNA_RT 0x6003 /* DEC DNA Routing */
-#define ETH_P_LAT 0x6004 /* DEC LAT */
-#define ETH_P_DIAG 0x6005 /* DEC Diagnostics */
-#define ETH_P_CUST 0x6006 /* DEC Customer use */
-#define ETH_P_SCA 0x6007 /* DEC Systems Comms Arch */
-#define ETH_P_RARP 0x8035 /* Reverse Addr Res packet */
-#define ETH_P_ATALK 0x809B /* Appletalk DDP */
-#define ETH_P_AARP 0x80F3 /* Appletalk AARP */
-#define ETH_P_8021Q 0x8100 /* 802.1Q VLAN Extended Header */
-#define ETH_P_IPX 0x8137 /* IPX over DIX */
-#define ETH_P_IPV6 0x86DD /* IPv6 over bluebook */
-#define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */
-#define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */
-#define ETH_P_ATMMPOA 0x884c /* MultiProtocol Over ATM */
-#define ETH_P_ATMFATE 0x8884 /* Frame-based ATM Transport
- * over Ethernet
- */
-
-/*
- * Non DIX types. Won't clash for 1500 types.
- */
-
-#define ETH_P_802_3 0x0001 /* Dummy type for 802.3 frames */
-#define ETH_P_AX25 0x0002 /* Dummy protocol id for AX.25 */
-#define ETH_P_ALL 0x0003 /* Every packet (be careful!!!) */
-#define ETH_P_802_2 0x0004 /* 802.2 frames */
-#define ETH_P_SNAP 0x0005 /* Internal only */
-#define ETH_P_DDCMP 0x0006 /* DEC DDCMP: Internal only */
-#define ETH_P_WAN_PPP 0x0007 /* Dummy type for WAN PPP frames*/
-#define ETH_P_PPP_MP 0x0008 /* Dummy type for PPP MP frames */
-#define ETH_P_LOCALTALK 0x0009 /* Localtalk pseudo type */
-#define ETH_P_PPPTALK 0x0010 /* Dummy type for Atalk over PPP*/
-#define ETH_P_TR_802_2 0x0011 /* 802.2 frames */
-#define ETH_P_MOBITEX 0x0015 /* Mobitex (kaz@cafe.net) */
-#define ETH_P_CONTROL 0x0016 /* Card specific control frames */
-#define ETH_P_IRDA 0x0017 /* Linux-IrDA */
-#define ETH_P_ECONET 0x0018 /* Acorn Econet */
-
-/*
- * This is an Ethernet frame header.
- */
-
-struct ethhdr {
- unsigned char h_dest[ETH_ALEN]; /* destination eth addr */
- unsigned char h_source[ETH_ALEN]; /* source ether addr */
- unsigned short h_proto; /* packet type ID field */
-};
-
-struct _vlan {
- unsigned short h_vlan_TCI; /* Encap prio and VLAN ID */
- unsigned short h_vlan_encapsulated_proto;
-};
-
-#define get_vlan_id(pvlan) \
- ((ntohs((unsigned short)pvlan->h_vlan_TCI)) & 0xfff)
-#define get_vlan_priority(pvlan) \
- ((ntohs((unsigned short)pvlan->h_vlan_TCI))>>13)
-#define get_vlan_encap_proto(pvlan) \
- (ntohs((unsigned short)pvlan->h_vlan_encapsulated_proto))
-
-#endif /* _LINUX_IF_ETHER_H */
diff --git a/drivers/staging/r8188eu/os_dep/xmit_linux.c b/drivers/staging/r8188eu/os_dep/xmit_linux.c
index 60e0eea7ad84..d35e92c17a5e 100644
--- a/drivers/staging/r8188eu/os_dep/xmit_linux.c
+++ b/drivers/staging/r8188eu/os_dep/xmit_linux.c
@@ -5,7 +5,6 @@
#include "../include/osdep_service.h"
#include "../include/drv_types.h"
-#include "../include/if_ether.h"
#include "../include/ip.h"
#include "../include/wifi.h"
#include "../include/mlme_osdep.h"
--
2.32.0
next prev parent reply other threads:[~2021-08-24 12:37 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-24 12:36 [PATCH v2 0/3] staging: r8188eu: remove unneeded header files Michael Straube
2021-08-24 12:36 ` Michael Straube [this message]
2021-08-24 12:36 ` [PATCH v2 2/3] staging: r8188eu: remove ip.h header file Michael Straube
2021-08-24 12:36 ` [PATCH v2 3/3] staging: r8188eu: remove ethernet.h " Michael Straube
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210824123621.10801-2-straube.linux@gmail.com \
--to=straube.linux@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=fmdefrancesco@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=martin@kaiser.cx \
--cc=phil@philpotter.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).