Linux kernel staging patches
 help / color / mirror / Atom feed
From: Alison Schofield <alison.schofield@intel.com>
To: Kushal Kothari <kushalkothari285@gmail.com>
Cc: gregkh@linuxfoundation.org, kush19992810@gmail.com,
	outreachy-kernel@googlegroups.com, fabioaiuto83@gmail.com,
	ross.schm.dev@gmail.com, fmdefrancesco@gmail.com,
	marcocesati@gmail.com, straube.linux@gmail.com,
	philippesdixon@gmail.com, manuelpalenzuelamerino@gmail.com,
	linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
	mike.rapoport@gmail.com, kushalkotharitest@googlegroups.com
Subject: Re: [Outreachy kernel] [PATCH v3 1/4] staging: rtl8723bs: core: Remove true and false comparison
Date: Fri, 22 Oct 2021 08:48:21 -0700	[thread overview]
Message-ID: <20211022154821.GA464812@alison-desk> (raw)
In-Reply-To: <7d5df4b8aacd961d0de367cbd73a8b75272652a8.1634906059.git.kushalkothari285@gmail.com>

On Fri, Oct 22, 2021 at 06:43:18PM +0530, Kushal Kothari wrote:
> Remove comparison to true and false in if statement.
> Issue found with checkpatch.pl.
> CHECK: Using comparison to true is error prone
> CHECK: Using comparison to false is error prone
> 
> Signed-off-by: Kushal Kothari <kushalkothari285@gmail.com>
> 
> Changes in v3: Enclose the version number inside the square bracket.
> Changes in v2: Unnecessary parantheses handled in *v2 staging: rtl8723bs: core: Remove unnecessary parentheses*
> ---

Hi Kushal,

See "Versioning one patch revision" and "Versioning patchsets" in
https://kernelnewbies.org/Outreachyfirstpatch

Either remove the changelogs in Patch 1-4 or put them below the --- in each
patch. 

Alison

>  drivers/staging/rtl8723bs/core/rtw_cmd.c | 22 +++++++++++-----------
>  1 file changed, 11 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/staging/rtl8723bs/core/rtw_cmd.c b/drivers/staging/rtl8723bs/core/rtw_cmd.c
> index 2624e994513f..acd4e8b1fad5 100644
> --- a/drivers/staging/rtl8723bs/core/rtw_cmd.c
> +++ b/drivers/staging/rtl8723bs/core/rtw_cmd.c
> @@ -371,7 +371,7 @@ void rtw_free_cmd_obj(struct cmd_obj *pcmd)
>  void rtw_stop_cmd_thread(struct adapter *adapter)
>  {
>  	if (adapter->cmdThread &&
> -		atomic_read(&(adapter->cmdpriv.cmdthd_running)) == true &&
> +		atomic_read(&(adapter->cmdpriv.cmdthd_running)) &&
>  		adapter->cmdpriv.stop_req == 0) {
>  		adapter->cmdpriv.stop_req = 1;
>  		complete(&adapter->cmdpriv.cmd_queue_comp);
> @@ -542,7 +542,7 @@ u8 rtw_sitesurvey_cmd(struct adapter  *padapter, struct ndis_802_11_ssid *ssid,
>  	struct cmd_priv 	*pcmdpriv = &padapter->cmdpriv;
>  	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
>  
> -	if (check_fwstate(pmlmepriv, _FW_LINKED) == true)
> +	if (check_fwstate(pmlmepriv, _FW_LINKED))
>  		rtw_lps_ctrl_wk_cmd(padapter, LPS_CTRL_SCAN, 1);
>  
>  	ph2c = rtw_zmalloc(sizeof(struct cmd_obj));
> @@ -775,7 +775,7 @@ u8 rtw_joinbss_cmd(struct adapter  *padapter, struct wlan_network *pnetwork)
>  	/*  If not,  we have to copy the connecting AP's MAC address to it so that */
>  	/*  the driver just has the bssid information for PMKIDList searching. */
>  
> -	if (pmlmepriv->assoc_by_bssid == false)
> +	if (!pmlmepriv->assoc_by_bssid)
>  		memcpy(&pmlmepriv->assoc_bssid[0], &pnetwork->network.mac_address[0], ETH_ALEN);
>  
>  	psecnetwork->ie_length = rtw_restruct_sec_ie(padapter, &pnetwork->network.ies[0], &psecnetwork->ies[0], pnetwork->network.ie_length);
> @@ -1164,7 +1164,7 @@ u8 rtw_set_chplan_cmd(struct adapter *padapter, u8 chplan, u8 enqueue, u8 swconf
>  	u8 res = _SUCCESS;
>  
>  	/*  check if allow software config */
> -	if (swconfig && rtw_hal_is_disable_sw_channel_plan(padapter) == true) {
> +	if (swconfig && rtw_hal_is_disable_sw_channel_plan(padapter)) {
>  		res = _FAIL;
>  		goto exit;
>  	}
> @@ -1250,7 +1250,7 @@ u8 traffic_status_watchdog(struct adapter *padapter, u8 from_timer)
>  	/*  */
>  	/*  Determine if our traffic is busy now */
>  	/*  */
> -	if ((check_fwstate(pmlmepriv, _FW_LINKED) == true)
> +	if ((check_fwstate(pmlmepriv, _FW_LINKED))
>  		/*&& !MgntInitAdapterInProgress(pMgntInfo)*/) {
>  		/*  if we raise bBusyTraffic in last watchdog, using lower threshold. */
>  		if (pmlmepriv->LinkDetectInfo.bBusyTraffic)
> @@ -1342,7 +1342,7 @@ static void dynamic_chk_wk_hdl(struct adapter *padapter)
>  
>  	pmlmepriv = &(padapter->mlmepriv);
>  
> -	if (check_fwstate(pmlmepriv, WIFI_AP_STATE) == true)
> +	if (check_fwstate(pmlmepriv, WIFI_AP_STATE))
>  		expire_timeout_chk(padapter);
>  
>  	/* for debug purpose */
> @@ -1377,8 +1377,8 @@ void lps_ctrl_wk_hdl(struct adapter *padapter, u8 lps_ctrl_type)
>  	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
>  	u8 mstatus;
>  
> -	if ((check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == true)
> -		|| (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) == true)) {
> +	if ((check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE)) ||
> +		(check_fwstate(pmlmepriv, WIFI_ADHOC_STATE))) {
>  		return;
>  	}
>  
> @@ -1386,7 +1386,7 @@ void lps_ctrl_wk_hdl(struct adapter *padapter, u8 lps_ctrl_type)
>  	case LPS_CTRL_SCAN:
>  		hal_btcoex_ScanNotify(padapter, true);
>  
> -		if (check_fwstate(pmlmepriv, _FW_LINKED) == true) {
> +		if (check_fwstate(pmlmepriv, _FW_LINKED)) {
>  			/*  connect */
>  			LPS_Leave(padapter, "LPS_CTRL_SCAN");
>  		}
> @@ -1512,7 +1512,7 @@ static void rtw_lps_change_dtim_hdl(struct adapter *padapter, u8 dtim)
>  	if (dtim <= 0 || dtim > 16)
>  		return;
>  
> -	if (hal_btcoex_IsBtControlLps(padapter) == true)
> +	if (hal_btcoex_IsBtControlLps(padapter))
>  		return;
>  
>  	mutex_lock(&pwrpriv->lock);
> @@ -1840,7 +1840,7 @@ static void c2h_wk_callback(struct work_struct *work)
>  			continue;
>  		}
>  
> -		if (ccx_id_filter(c2h_evt) == true) {
> +		if (ccx_id_filter(c2h_evt)) {
>  			/* Handle CCX report here */
>  			rtw_hal_c2h_handler(adapter, c2h_evt);
>  			kfree(c2h_evt);
> -- 
> 2.25.1
> 
> -- 
> You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to outreachy-kernel+unsubscribe@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/7d5df4b8aacd961d0de367cbd73a8b75272652a8.1634906059.git.kushalkothari285%40gmail.com.

  parent reply	other threads:[~2021-10-22 15:40 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-22 13:13 [PATCH v3 0/4] staging: rtl8723bs: core: Cleanup patchset for style issues in rtw_cmd.c Kushal Kothari
2021-10-22 13:13 ` [PATCH v3 1/4] staging: rtl8723bs: core: Remove true and false comparison Kushal Kothari
2021-10-22 15:28   ` Bryan Brattlof
2021-10-22 15:48   ` Alison Schofield [this message]
2021-10-22 13:13 ` [PATCH v3 2/4] staging: rtl8723bs: core: Remove unnecessary parentheses Kushal Kothari
2021-10-22 13:13 ` [PATCH v3 3/4] staging: rtl8723bs: core: Remove unnecessary space after a cast Kushal Kothari
2021-10-22 13:13 ` [PATCH v3 4/4] staging: rtl8723bs: core: Remove unnecessary blank lines Kushal Kothari

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211022154821.GA464812@alison-desk \
    --to=alison.schofield@intel.com \
    --cc=fabioaiuto83@gmail.com \
    --cc=fmdefrancesco@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=kush19992810@gmail.com \
    --cc=kushalkothari285@gmail.com \
    --cc=kushalkotharitest@googlegroups.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=manuelpalenzuelamerino@gmail.com \
    --cc=marcocesati@gmail.com \
    --cc=mike.rapoport@gmail.com \
    --cc=outreachy-kernel@googlegroups.com \
    --cc=philippesdixon@gmail.com \
    --cc=ross.schm.dev@gmail.com \
    --cc=straube.linux@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox