[PATCH v3 2/3] PCI: mt7621: Add MediaTek MT7621 PCIe host controller driver

Sergio Paracuellos
2021-09-22T05:00:41Z

Add driver for the PCIe controller of the MT7621 SoC.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
---
arch/mips/ralink/Kconfig | 3 +-
drivers/pci/controller/Kconfig | 8 ++
drivers/pci/controller/Makefile | 1 +
.../controller}/pci-mt7621.c | 0
drivers/staging/Kconfig | 2 -
drivers/staging/Makefile | 1 -
drivers/staging/mt7621-pci/Kconfig | 8 --
drivers/staging/mt7621-pci/Makefile | 2 -
drivers/staging/mt7621-pci/TODO | 4 -
.../mt7621-pci/mediatek,mt7621-pci.txt | 104 ------------------
10 files changed, 11 insertions(+), 122 deletions(-)
rename drivers/{staging/mt7621-pci => pci/controller}/pci-mt7621.c (100%)
delete mode 100644 drivers/staging/mt7621-pci/Kconfig
delete mode 100644 drivers/staging/mt7621-pci/Makefile
delete mode 100644 drivers/staging/mt7621-pci/TODO
delete mode 100644 drivers/staging/mt7621-pci/mediatek,mt7621-pci.txt

diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index c800bf5559b5..120adad51d6a 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -51,7 +51,8 @@ choice
select SYS_SUPPORTS_HIGHMEM
select MIPS_GIC
select CLKSRC_MIPS_GIC
- select HAVE_PCI if PCI_MT7621
+ select HAVE_PCI
+ select PCI_DRIVERS_GENERIC
select SOC_BUS
endchoice

diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index 326f7d13024f..b76404be0360 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -312,6 +312,14 @@ config PCIE_HISI_ERR
Say Y here if you want error handling support
for the PCIe controller's errors on HiSilicon HIP SoCs

+config PCI_MT7621
+ tristate "MediaTek MT7621 PCI Controller"
+ depends on (RALINK && SOC_MT7621) || (MIPS && COMPILE_TEST)
+ select PHY_MT7621_PCI
+ default SOC_MT7621
+ help
+ This selects a driver for the MediaTek MT7621 PCI Controller.
+
source "drivers/pci/controller/dwc/Kconfig"
source "drivers/pci/controller/mobiveil/Kconfig"
source "drivers/pci/controller/cadence/Kconfig"
diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
index aaf30b3dcc14..f42a566353cb 100644
--- a/drivers/pci/controller/Makefile
+++ b/drivers/pci/controller/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_VMD) += vmd.o
obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o
obj-$(CONFIG_PCI_LOONGSON) += pci-loongson.o
obj-$(CONFIG_PCIE_HISI_ERR) += pcie-hisi-error.o
+obj-$(CONFIG_PCI_MT7621) += pci-mt7621.o
# pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
obj-y += dwc/
obj-y += mobiveil/
diff --git a/drivers/staging/mt7621-pci/pci-mt7621.c b/drivers/pci/controller/pci-mt7621.c
similarity index 100%
rename from drivers/staging/mt7621-pci/pci-mt7621.c
rename to drivers/pci/controller/pci-mt7621.c
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index e03627ad4460..59af251e7576 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -86,8 +86,6 @@ source "drivers/staging/vc04_services/Kconfig"

source "drivers/staging/pi433/Kconfig"

-source "drivers/staging/mt7621-pci/Kconfig"
-
source "drivers/staging/mt7621-dma/Kconfig"

source "drivers/staging/ralink-gdma/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index c7f8d8d8dd11..76f413470bc8 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -33,7 +33,6 @@ obj-$(CONFIG_KS7010) += ks7010/
obj-$(CONFIG_GREYBUS) += greybus/
obj-$(CONFIG_BCM2835_VCHIQ) += vc04_services/
obj-$(CONFIG_PI433) += pi433/
-obj-$(CONFIG_PCI_MT7621) += mt7621-pci/
obj-$(CONFIG_SOC_MT7621) += mt7621-dma/
obj-$(CONFIG_DMA_RALINK) += ralink-gdma/
obj-$(CONFIG_SOC_MT7621) += mt7621-dts/
diff --git a/drivers/staging/mt7621-pci/Kconfig b/drivers/staging/mt7621-pci/Kconfig
deleted file mode 100644
index ce58042f2f21..000000000000
--- a/drivers/staging/mt7621-pci/Kconfig
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-config PCI_MT7621
- tristate "MediaTek MT7621 PCI Controller"
- depends on RALINK
- select PCI_DRIVERS_GENERIC
- help
- This selects a driver for the MediaTek MT7621 PCI Controller.
-
diff --git a/drivers/staging/mt7621-pci/Makefile b/drivers/staging/mt7621-pci/Makefile
deleted file mode 100644
index f4e651cf7ce3..000000000000
--- a/drivers/staging/mt7621-pci/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_PCI_MT7621) += pci-mt7621.o
diff --git a/drivers/staging/mt7621-pci/TODO b/drivers/staging/mt7621-pci/TODO
deleted file mode 100644
index d674a9ac85c1..000000000000
--- a/drivers/staging/mt7621-pci/TODO
+++ /dev/null
@@ -1,4 +0,0 @@
-
-- general code review and cleanup
-
-Cc: NeilBrown <neil@brown.name>
diff --git a/drivers/staging/mt7621-pci/mediatek,mt7621-pci.txt b/drivers/staging/mt7621-pci/mediatek,mt7621-pci.txt
deleted file mode 100644
index 327a68267309..000000000000
--- a/drivers/staging/mt7621-pci/mediatek,mt7621-pci.txt
+++ /dev/null
@@ -1,104 +0,0 @@
-MediaTek MT7621 PCIe controller
-
-Required properties:
-- compatible: "mediatek,mt7621-pci"
-- device_type: Must be "pci"
-- reg: Base addresses and lengths of the PCIe subsys and root ports.
-- bus-range: Range of bus numbers associated with this controller.
-- #address-cells: Address representation for root ports (must be 3)
-- pinctrl-names : The pin control state names.
-- pinctrl-0: The "default" pinctrl state.
-- #size-cells: Size representation for root ports (must be 2)
-- ranges: Ranges for the PCI memory and I/O regions.
-- #interrupt-cells: Must be 1
-- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties.
- Please refer to the standard PCI bus binding document for a more detailed
- explanation.
-- status: either "disabled" or "okay".
-- resets: Must contain an entry for each entry in reset-names.
- See ../reset/reset.txt for details.
-- reset-names: Must be "pcie0", "pcie1", "pcieN"... based on the number of
- root ports.
-- clocks: Must contain an entry for each entry in clock-names.
- See ../clocks/clock-bindings.txt for details.
-- clock-names: Must be "pcie0", "pcie1", "pcieN"... based on the number of
- root ports.
-- reset-gpios: GPIO specs for the reset pins.
-
-In addition, the device tree node must have sub-nodes describing each PCIe port
-interface, having the following mandatory properties:
-
-Required properties:
-- reg: Only the first four bytes are used to refer to the correct bus number
- and device number.
-- #address-cells: Must be 3
-- #size-cells: Must be 2
-- ranges: Sub-ranges distributed from the PCIe controller node. An empty
- property is sufficient.
-- bus-range: Range of bus numbers associated with this port.
-
-Example for MT7621:
-
- pcie: pcie@1e140000 {
- compatible = "mediatek,mt7621-pci";
- reg = <0x1e140000 0x100 /* host-pci bridge registers */
- 0x1e142000 0x100 /* pcie port 0 RC control registers */
- 0x1e143000 0x100 /* pcie port 1 RC control registers */
- 0x1e144000 0x100>; /* pcie port 2 RC control registers */
-
- #address-cells = <3>;
- #size-cells = <2>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_pins>;
-
- device_type = "pci";
-
- bus-range = <0 255>;
- ranges = <
- 0x02000000 0 0x00000000 0x60000000 0 0x10000000 /* pci memory */
- 0x01000000 0 0x00000000 0x1e160000 0 0x00010000 /* io space */
- >;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0xF0000 0 0 1>;
- interrupt-map = <0x10000 0 0 1 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>,
- <0x20000 0 0 1 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>,
- <0x30000 0 0 1 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
-
- status = "disabled";
-
- resets = <&rstctrl 24 &rstctrl 25 &rstctrl 26>;
- reset-names = "pcie0", "pcie1", "pcie2";
- clocks = <&clkctrl 24 &clkctrl 25 &clkctrl 26>;
- clock-names = "pcie0", "pcie1", "pcie2";
-
- reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>,
- <&gpio 8 GPIO_ACTIVE_LOW>,
- <&gpio 7 GPIO_ACTIVE_LOW>;
-
- pcie@0,0 {
- reg = <0x0000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
- bus-range = <0x00 0xff>;
- };
-
- pcie@1,0 {
- reg = <0x0800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
- bus-range = <0x00 0xff>;
- };
-
- pcie@2,0 {
- reg = <0x1000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
- bus-range = <0x00 0xff>;
- };
- };
-
--
2.25.1