From: Zameer Manji <zmanji@gmail.com>
To: gregkh@linuxfoundation.org
Cc: Zameer Manji <zmanji@gmail.com>,
Larry Finger <Larry.Finger@lwfinger.net>,
Phillip Potter <phil@philpotter.co.uk>,
Michael Straube <straube.linux@gmail.com>,
"Fabio M. De Francesco" <fmdefrancesco@gmail.com>,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH] staging: r8188eu: remove unused defines in wifi.h
Date: Tue, 16 Nov 2021 01:14:33 +0000 [thread overview]
Message-ID: <20211116011451.896714-1-zmanji@gmail.com> (raw)
None of these defines in wifi.h are used so they
can be safely removed.
Signed-off-by: Zameer Manji <zmanji@gmail.com>
---
drivers/staging/r8188eu/include/wifi.h | 57 --------------------------
1 file changed, 57 deletions(-)
diff --git a/drivers/staging/r8188eu/include/wifi.h b/drivers/staging/r8188eu/include/wifi.h
index 193a557f0f47..7cbc7015e90f 100644
--- a/drivers/staging/r8188eu/include/wifi.h
+++ b/drivers/staging/r8188eu/include/wifi.h
@@ -13,32 +13,9 @@
#define BIT(x) (1 << (x))
#define WLAN_ETHHDR_LEN 14
-#define WLAN_ETHADDR_LEN 6
-#define WLAN_IEEE_OUI_LEN 3
-#define WLAN_ADDR_LEN 6
-#define WLAN_CRC_LEN 4
-#define WLAN_BSSID_LEN 6
-#define WLAN_BSS_TS_LEN 8
#define WLAN_HDR_A3_LEN 24
-#define WLAN_HDR_A4_LEN 30
#define WLAN_HDR_A3_QOS_LEN 26
-#define WLAN_HDR_A4_QOS_LEN 32
#define WLAN_SSID_MAXLEN 32
-#define WLAN_DATA_MAXLEN 2312
-
-#define WLAN_A3_PN_OFFSET 24
-#define WLAN_A4_PN_OFFSET 30
-
-#define WLAN_MIN_ETHFRM_LEN 60
-#define WLAN_MAX_ETHFRM_LEN 1514
-#define WLAN_ETHHDR_LEN 14
-
-#define P80211CAPTURE_VERSION 0x80211001
-
-/* This value is tested by WiFi 11n Test Plan 5.2.3. */
-/* This test verifies the WLAN NIC can update the NAV through sending
- * the CTS with large duration. */
-#define WiFiNavUpperUs 30000 /* 30 ms */
enum WIFI_FRAME_TYPE {
WIFI_MGT_TYPE = (0),
@@ -487,13 +464,6 @@ static inline int IsFrameTypeCtrl(unsigned char *pframe)
#define _STATUS_CODE_ 2
#define _TIMESTAMP_ 8
-#define AUTH_ODD_TO 0
-#define AUTH_EVEN_TO 1
-
-#define WLAN_ETHCONV_ENCAP 1
-#define WLAN_ETHCONV_RFC1042 2
-#define WLAN_ETHCONV_8021h 3
-
#define cap_ESS BIT(0)
#define cap_IBSS BIT(1)
#define cap_CFPollable BIT(2)
@@ -632,13 +602,6 @@ enum ht_cap_ampdu_factor {
#define HT_INFO_OPERATION_MODE_TRANSMIT_BURST_LIMIT ((u8) BIT(3))
#define HT_INFO_OPERATION_MODE_NON_HT_STA_PRESENT ((u8) BIT(4))
-#define HT_INFO_STBC_PARAM_DUAL_BEACON ((u16) BIT(6))
-#define HT_INFO_STBC_PARAM_DUAL_STBC_PROTECT ((u16) BIT(7))
-#define HT_INFO_STBC_PARAM_SECONDARY_BC ((u16) BIT(8))
-#define HT_INFO_STBC_PARAM_LSIG_TXOP_PROTECT_ALLOWED ((u16) BIT(9))
-#define HT_INFO_STBC_PARAM_PCO_ACTIVE ((u16) BIT(10))
-#define HT_INFO_STBC_PARAM_PCO_PHASE ((u16) BIT(11))
-
/* ===============WPS Section=============== */
/* For WPSv1.0 */
#define WPSOUI 0x0050f204
@@ -949,26 +912,6 @@ enum P2P_PS_MODE {
P2P_PS_MIX = 3, /* CTWindow and NoA */
};
-/* =====================WFD Section===================== */
-/* For Wi-Fi Display */
-#define WFD_ATTR_DEVICE_INFO 0x00
-#define WFD_ATTR_ASSOC_BSSID 0x01
-#define WFD_ATTR_COUPLED_SINK_INFO 0x06
-#define WFD_ATTR_LOCAL_IP_ADDR 0x08
-#define WFD_ATTR_SESSION_INFO 0x09
-#define WFD_ATTR_ALTER_MAC 0x0a
-
-/* For WFD Device Information Attribute */
-#define WFD_DEVINFO_SOURCE 0x0000
-#define WFD_DEVINFO_PSINK 0x0001
-#define WFD_DEVINFO_SSINK 0x0002
-#define WFD_DEVINFO_DUAL 0x0003
-
-#define WFD_DEVINFO_SESSION_AVAIL 0x0010
-#define WFD_DEVINFO_WSD 0x0040
-#define WFD_DEVINFO_PC_TDLS 0x0080
-#define WFD_DEVINFO_HDCP_SUPPORT 0x0100
-
#define IP_MCAST_MAC(mac) \
((mac[0] == 0x01) && (mac[1] == 0x00) && (mac[2] == 0x5e))
#define ICMPV6_MCAST_MAC(mac) \
--
2.25.1
next reply other threads:[~2021-11-16 1:15 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-16 1:14 Zameer Manji [this message]
2021-11-16 4:56 ` [PATCH] staging: r8188eu: remove unused defines in wifi.h Pavel Skripkin
2021-11-16 13:48 ` Zameer Manji
2021-11-16 14:00 ` Pavel Skripkin
2021-11-16 14:18 ` Dan Carpenter
2021-11-16 15:01 ` Pavel Skripkin
2021-11-16 15:11 ` Dan Carpenter
2021-11-16 15:03 ` Pavel Skripkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211116011451.896714-1-zmanji@gmail.com \
--to=zmanji@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=fmdefrancesco@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=phil@philpotter.co.uk \
--cc=straube.linux@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox