From: Michael Straube <straube.linux@gmail.com>
To: gregkh@linuxfoundation.org
Cc: Larry.Finger@lwfinger.net, phil@philpotter.co.uk,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
Michael Straube <straube.linux@gmail.com>
Subject: [PATCH 01/12] staging: r8188eu: remove RF_PATH_{C,D}
Date: Sun, 5 Dec 2021 14:59:08 +0100 [thread overview]
Message-ID: <20211205135919.30460-2-straube.linux@gmail.com> (raw)
In-Reply-To: <20211205135919.30460-1-straube.linux@gmail.com>
pHalData->PHYRegDef[RF_PATH_C] and pHalData->PHYRegDef[RF_PATH_D]
are initialized but not used. Remove them and remove RF_PATH_C and
RF_PATH_D from the rf_radio_path enum.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
---
drivers/staging/r8188eu/hal/rtl8188e_phycfg.c | 24 -------------------
.../staging/r8188eu/include/Hal8188EPhyCfg.h | 2 --
.../staging/r8188eu/include/rtl8188e_hal.h | 2 +-
3 files changed, 1 insertion(+), 27 deletions(-)
diff --git a/drivers/staging/r8188eu/hal/rtl8188e_phycfg.c b/drivers/staging/r8188eu/hal/rtl8188e_phycfg.c
index 73d5eb53a927..3d921767db91 100644
--- a/drivers/staging/r8188eu/hal/rtl8188e_phycfg.c
+++ b/drivers/staging/r8188eu/hal/rtl8188e_phycfg.c
@@ -392,14 +392,10 @@ phy_InitBBRFRegisterDefinition(
/* RF Interface Sowrtware Control */
pHalData->PHYRegDef[RF_PATH_A].rfintfs = rFPGA0_XAB_RFInterfaceSW; /* 16 LSBs if read 32-bit from 0x870 */
pHalData->PHYRegDef[RF_PATH_B].rfintfs = rFPGA0_XAB_RFInterfaceSW; /* 16 MSBs if read 32-bit from 0x870 (16-bit for 0x872) */
- pHalData->PHYRegDef[RF_PATH_C].rfintfs = rFPGA0_XCD_RFInterfaceSW;/* 16 LSBs if read 32-bit from 0x874 */
- pHalData->PHYRegDef[RF_PATH_D].rfintfs = rFPGA0_XCD_RFInterfaceSW;/* 16 MSBs if read 32-bit from 0x874 (16-bit for 0x876) */
/* RF Interface Readback Value */
pHalData->PHYRegDef[RF_PATH_A].rfintfi = rFPGA0_XAB_RFInterfaceRB; /* 16 LSBs if read 32-bit from 0x8E0 */
pHalData->PHYRegDef[RF_PATH_B].rfintfi = rFPGA0_XAB_RFInterfaceRB;/* 16 MSBs if read 32-bit from 0x8E0 (16-bit for 0x8E2) */
- pHalData->PHYRegDef[RF_PATH_C].rfintfi = rFPGA0_XCD_RFInterfaceRB;/* 16 LSBs if read 32-bit from 0x8E4 */
- pHalData->PHYRegDef[RF_PATH_D].rfintfi = rFPGA0_XCD_RFInterfaceRB;/* 16 MSBs if read 32-bit from 0x8E4 (16-bit for 0x8E6) */
/* RF Interface Output (and Enable) */
pHalData->PHYRegDef[RF_PATH_A].rfintfo = rFPGA0_XA_RFInterfaceOE; /* 16 LSBs if read 32-bit from 0x860 */
@@ -416,14 +412,10 @@ phy_InitBBRFRegisterDefinition(
/* RF parameter */
pHalData->PHYRegDef[RF_PATH_A].rfLSSI_Select = rFPGA0_XAB_RFParameter; /* BB Band Select */
pHalData->PHYRegDef[RF_PATH_B].rfLSSI_Select = rFPGA0_XAB_RFParameter;
- pHalData->PHYRegDef[RF_PATH_C].rfLSSI_Select = rFPGA0_XCD_RFParameter;
- pHalData->PHYRegDef[RF_PATH_D].rfLSSI_Select = rFPGA0_XCD_RFParameter;
/* Tx AGC Gain Stage (same for all path. Should we remove this?) */
pHalData->PHYRegDef[RF_PATH_A].rfTxGainStage = rFPGA0_TxGainStage; /* Tx gain stage */
pHalData->PHYRegDef[RF_PATH_B].rfTxGainStage = rFPGA0_TxGainStage; /* Tx gain stage */
- pHalData->PHYRegDef[RF_PATH_C].rfTxGainStage = rFPGA0_TxGainStage; /* Tx gain stage */
- pHalData->PHYRegDef[RF_PATH_D].rfTxGainStage = rFPGA0_TxGainStage; /* Tx gain stage */
/* Tranceiver A~D HSSI Parameter-1 */
pHalData->PHYRegDef[RF_PATH_A].rfHSSIPara1 = rFPGA0_XA_HSSIParameter1; /* wire control parameter1 */
@@ -436,50 +428,34 @@ phy_InitBBRFRegisterDefinition(
/* RF switch Control */
pHalData->PHYRegDef[RF_PATH_A].rfSwitchControl = rFPGA0_XAB_SwitchControl; /* TR/Ant switch control */
pHalData->PHYRegDef[RF_PATH_B].rfSwitchControl = rFPGA0_XAB_SwitchControl;
- pHalData->PHYRegDef[RF_PATH_C].rfSwitchControl = rFPGA0_XCD_SwitchControl;
- pHalData->PHYRegDef[RF_PATH_D].rfSwitchControl = rFPGA0_XCD_SwitchControl;
/* AGC control 1 */
pHalData->PHYRegDef[RF_PATH_A].rfAGCControl1 = rOFDM0_XAAGCCore1;
pHalData->PHYRegDef[RF_PATH_B].rfAGCControl1 = rOFDM0_XBAGCCore1;
- pHalData->PHYRegDef[RF_PATH_C].rfAGCControl1 = rOFDM0_XCAGCCore1;
- pHalData->PHYRegDef[RF_PATH_D].rfAGCControl1 = rOFDM0_XDAGCCore1;
/* AGC control 2 */
pHalData->PHYRegDef[RF_PATH_A].rfAGCControl2 = rOFDM0_XAAGCCore2;
pHalData->PHYRegDef[RF_PATH_B].rfAGCControl2 = rOFDM0_XBAGCCore2;
- pHalData->PHYRegDef[RF_PATH_C].rfAGCControl2 = rOFDM0_XCAGCCore2;
- pHalData->PHYRegDef[RF_PATH_D].rfAGCControl2 = rOFDM0_XDAGCCore2;
/* RX AFE control 1 */
pHalData->PHYRegDef[RF_PATH_A].rfRxIQImbalance = rOFDM0_XARxIQImbalance;
pHalData->PHYRegDef[RF_PATH_B].rfRxIQImbalance = rOFDM0_XBRxIQImbalance;
- pHalData->PHYRegDef[RF_PATH_C].rfRxIQImbalance = rOFDM0_XCRxIQImbalance;
- pHalData->PHYRegDef[RF_PATH_D].rfRxIQImbalance = rOFDM0_XDRxIQImbalance;
/* RX AFE control 1 */
pHalData->PHYRegDef[RF_PATH_A].rfRxAFE = rOFDM0_XARxAFE;
pHalData->PHYRegDef[RF_PATH_B].rfRxAFE = rOFDM0_XBRxAFE;
- pHalData->PHYRegDef[RF_PATH_C].rfRxAFE = rOFDM0_XCRxAFE;
- pHalData->PHYRegDef[RF_PATH_D].rfRxAFE = rOFDM0_XDRxAFE;
/* Tx AFE control 1 */
pHalData->PHYRegDef[RF_PATH_A].rfTxIQImbalance = rOFDM0_XATxIQImbalance;
pHalData->PHYRegDef[RF_PATH_B].rfTxIQImbalance = rOFDM0_XBTxIQImbalance;
- pHalData->PHYRegDef[RF_PATH_C].rfTxIQImbalance = rOFDM0_XCTxIQImbalance;
- pHalData->PHYRegDef[RF_PATH_D].rfTxIQImbalance = rOFDM0_XDTxIQImbalance;
/* Tx AFE control 2 */
pHalData->PHYRegDef[RF_PATH_A].rfTxAFE = rOFDM0_XATxAFE;
pHalData->PHYRegDef[RF_PATH_B].rfTxAFE = rOFDM0_XBTxAFE;
- pHalData->PHYRegDef[RF_PATH_C].rfTxAFE = rOFDM0_XCTxAFE;
- pHalData->PHYRegDef[RF_PATH_D].rfTxAFE = rOFDM0_XDTxAFE;
/* Tranceiver LSSI Readback SI mode */
pHalData->PHYRegDef[RF_PATH_A].rfLSSIReadBack = rFPGA0_XA_LSSIReadBack;
pHalData->PHYRegDef[RF_PATH_B].rfLSSIReadBack = rFPGA0_XB_LSSIReadBack;
- pHalData->PHYRegDef[RF_PATH_C].rfLSSIReadBack = rFPGA0_XC_LSSIReadBack;
- pHalData->PHYRegDef[RF_PATH_D].rfLSSIReadBack = rFPGA0_XD_LSSIReadBack;
/* Tranceiver LSSI Readback PI mode */
pHalData->PHYRegDef[RF_PATH_A].rfLSSIReadBackPi = TransceiverA_HSPI_Readback;
diff --git a/drivers/staging/r8188eu/include/Hal8188EPhyCfg.h b/drivers/staging/r8188eu/include/Hal8188EPhyCfg.h
index b1ba7acb454c..6b108800d8d2 100644
--- a/drivers/staging/r8188eu/include/Hal8188EPhyCfg.h
+++ b/drivers/staging/r8188eu/include/Hal8188EPhyCfg.h
@@ -33,8 +33,6 @@ enum hw90_block {
enum rf_radio_path {
RF_PATH_A = 0, /* Radio Path A */
RF_PATH_B = 1, /* Radio Path B */
- RF_PATH_C = 2, /* Radio Path C */
- RF_PATH_D = 3, /* Radio Path D */
};
#define MAX_PG_GROUP 13
diff --git a/drivers/staging/r8188eu/include/rtl8188e_hal.h b/drivers/staging/r8188eu/include/rtl8188e_hal.h
index 0ebfcb732032..eaa4b24055d8 100644
--- a/drivers/staging/r8188eu/include/rtl8188e_hal.h
+++ b/drivers/staging/r8188eu/include/rtl8188e_hal.h
@@ -227,7 +227,7 @@ struct hal_data_8188e {
u32 AcParam_BE; /* Original parameter for BE, use for EDCA turbo. */
- struct bb_reg_def PHYRegDef[4]; /* Radio A/B/C/D */
+ struct bb_reg_def PHYRegDef[2]; /* Radio A/B */
u32 RfRegChnlVal[2];
--
2.34.1
next prev parent reply other threads:[~2021-12-05 13:59 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-05 13:59 [PATCH 00/12] staging: r8188eu: misc cleanups Michael Straube
2021-12-05 13:59 ` Michael Straube [this message]
2021-12-05 13:59 ` [PATCH 02/12] staging: r8188eu: struct odm_mac_status_info is not used Michael Straube
2021-12-05 13:59 ` [PATCH 03/12] staging: r8188eu: remove macro PHY_SetRFReg Michael Straube
2021-12-05 13:59 ` [PATCH 04/12] staging: r8188eu: remove macro PHY_QueryRFReg Michael Straube
2021-12-05 13:59 ` [PATCH 05/12] staging: r8188eu: remove macro PHY_SetBBReg Michael Straube
2021-12-05 13:59 ` [PATCH 06/12] staging: r8188eu: remove macro PHY_QueryBBReg Michael Straube
2021-12-05 13:59 ` [PATCH 07/12] staging: r8188eu: remove duplicate defines Michael Straube
2021-12-05 13:59 ` [PATCH 08/12] staging: r8188eu: bWIFI_Direct is set but never used Michael Straube
2021-12-05 13:59 ` [PATCH 09/12] staging: r8188eu: bWIFI_Display " Michael Straube
2021-12-05 13:59 ` [PATCH 10/12] staging: r8188eu: remove unused macro IS_FW_81xxC Michael Straube
2021-12-05 13:59 ` [PATCH 11/12] staging: r8188eu: remove macro GET_HAL_DATA Michael Straube
2021-12-05 13:59 ` [PATCH 12/12] staging: r8188eu: hal_data_sz is set but never used Michael Straube
2021-12-05 14:42 ` Pavel Skripkin
2021-12-05 15:14 ` Michael Straube
2021-12-05 15:22 ` Michael Straube
2021-12-05 17:23 ` Pavel Skripkin
2021-12-05 18:09 ` Michael Straube
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211205135919.30460-2-straube.linux@gmail.com \
--to=straube.linux@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=phil@philpotter.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox