From: Benjamin Gaignard <benjamin.gaignard@collabora.com>
To: ezequiel@vanguardiasur.com.ar, p.zabel@pengutronix.de,
mchehab@kernel.org, gregkh@linuxfoundation.org
Cc: linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
jon@nanocrew.net, aford173@gmail.com, kernel@collabora.com,
Benjamin Gaignard <benjamin.gaignard@collabora.com>
Subject: [PATCH v2] media: hantro: HEVC: Fix reference frames management
Date: Tue, 3 May 2022 15:51:38 +0200 [thread overview]
Message-ID: <20220503135138.678677-1-benjamin.gaignard@collabora.com> (raw)
PoC shall be int the range of -2^31 to 2^31 -1
(HEVC spec section 8.3.1 Decoding process for picture order count).
The current way to know if an entry in reference picture array is free
is to test if PoC = UNUSED_REF. Since UNUSED_REF is defined as '-1' that
could lead to decode issue if one PoC also equal '-1'.
PoC with value = '-1' exists in conformance test SLIST_B_Sony_9.
Change the way unused entries are managed in reference pictures array to
avoid using PoC to detect then.
This patch doesn't change fluster HEVC score.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
---
.../staging/media/hantro/hantro_g2_hevc_dec.c | 6 ++---
drivers/staging/media/hantro/hantro_hevc.c | 27 +++----------------
drivers/staging/media/hantro/hantro_hw.h | 2 +-
3 files changed, 6 insertions(+), 29 deletions(-)
diff --git a/drivers/staging/media/hantro/hantro_g2_hevc_dec.c b/drivers/staging/media/hantro/hantro_g2_hevc_dec.c
index 0a8c01ff2fa7..b7835bbf5e98 100644
--- a/drivers/staging/media/hantro/hantro_g2_hevc_dec.c
+++ b/drivers/staging/media/hantro/hantro_g2_hevc_dec.c
@@ -473,8 +473,8 @@ static int set_ref(struct hantro_ctx *ctx)
set_ref_pic_list(ctx);
- /* We will only keep the references picture that are still used */
- ctx->hevc_dec.ref_bufs_used = 0;
+ /* We will only keep the references pictures that are still used */
+ hantro_hevc_ref_init(ctx);
/* Set up addresses of DPB buffers */
dpb_longterm_e = 0;
@@ -515,8 +515,6 @@ static int set_ref(struct hantro_ctx *ctx)
hantro_write_addr(vpu, G2_OUT_CHROMA_ADDR, chroma_addr);
hantro_write_addr(vpu, G2_OUT_MV_ADDR, mv_addr);
- hantro_hevc_ref_remove_unused(ctx);
-
for (; i < V4L2_HEVC_DPB_ENTRIES_NUM_MAX; i++) {
hantro_write_addr(vpu, G2_REF_LUMA_ADDR(i), 0);
hantro_write_addr(vpu, G2_REF_CHROMA_ADDR(i), 0);
diff --git a/drivers/staging/media/hantro/hantro_hevc.c b/drivers/staging/media/hantro/hantro_hevc.c
index 7d4b1d72255c..7fdec50dc853 100644
--- a/drivers/staging/media/hantro/hantro_hevc.c
+++ b/drivers/staging/media/hantro/hantro_hevc.c
@@ -25,15 +25,11 @@
#define MAX_TILE_COLS 20
#define MAX_TILE_ROWS 22
-#define UNUSED_REF -1
-
-static void hantro_hevc_ref_init(struct hantro_ctx *ctx)
+void hantro_hevc_ref_init(struct hantro_ctx *ctx)
{
struct hantro_hevc_dec_hw_ctx *hevc_dec = &ctx->hevc_dec;
- int i;
- for (i = 0; i < NUM_REF_PICTURES; i++)
- hevc_dec->ref_bufs_poc[i] = UNUSED_REF;
+ hevc_dec->ref_bufs_used = 0;
}
dma_addr_t hantro_hevc_get_ref_buf(struct hantro_ctx *ctx,
@@ -60,7 +56,7 @@ int hantro_hevc_add_ref_buf(struct hantro_ctx *ctx, int poc, dma_addr_t addr)
/* Add a new reference buffer */
for (i = 0; i < NUM_REF_PICTURES; i++) {
- if (hevc_dec->ref_bufs_poc[i] == UNUSED_REF) {
+ if (!(hevc_dec->ref_bufs_used & 1 << i)) {
hevc_dec->ref_bufs_used |= 1 << i;
hevc_dec->ref_bufs_poc[i] = poc;
hevc_dec->ref_bufs[i].dma = addr;
@@ -71,23 +67,6 @@ int hantro_hevc_add_ref_buf(struct hantro_ctx *ctx, int poc, dma_addr_t addr)
return -EINVAL;
}
-void hantro_hevc_ref_remove_unused(struct hantro_ctx *ctx)
-{
- struct hantro_hevc_dec_hw_ctx *hevc_dec = &ctx->hevc_dec;
- int i;
-
- /* Just tag buffer as unused, do not free them */
- for (i = 0; i < NUM_REF_PICTURES; i++) {
- if (hevc_dec->ref_bufs_poc[i] == UNUSED_REF)
- continue;
-
- if (hevc_dec->ref_bufs_used & (1 << i))
- continue;
-
- hevc_dec->ref_bufs_poc[i] = UNUSED_REF;
- }
-}
-
static int tile_buffer_reallocate(struct hantro_ctx *ctx)
{
struct hantro_dev *vpu = ctx->dev;
diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h
index 9f31cce609d6..5de558386179 100644
--- a/drivers/staging/media/hantro/hantro_hw.h
+++ b/drivers/staging/media/hantro/hantro_hw.h
@@ -337,9 +337,9 @@ int hantro_hevc_dec_init(struct hantro_ctx *ctx);
void hantro_hevc_dec_exit(struct hantro_ctx *ctx);
int hantro_g2_hevc_dec_run(struct hantro_ctx *ctx);
int hantro_hevc_dec_prepare_run(struct hantro_ctx *ctx);
+void hantro_hevc_ref_init(struct hantro_ctx *ctx);
dma_addr_t hantro_hevc_get_ref_buf(struct hantro_ctx *ctx, s32 poc);
int hantro_hevc_add_ref_buf(struct hantro_ctx *ctx, int poc, dma_addr_t addr);
-void hantro_hevc_ref_remove_unused(struct hantro_ctx *ctx);
static inline unsigned short hantro_vp9_num_sbs(unsigned short dimension)
{
--
2.32.0
next reply other threads:[~2022-05-03 13:51 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-03 13:51 Benjamin Gaignard [this message]
2022-05-03 14:40 ` [PATCH v2] media: hantro: HEVC: Fix reference frames management Ezequiel Garcia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220503135138.678677-1-benjamin.gaignard@collabora.com \
--to=benjamin.gaignard@collabora.com \
--cc=aford173@gmail.com \
--cc=ezequiel@vanguardiasur.com.ar \
--cc=gregkh@linuxfoundation.org \
--cc=jon@nanocrew.net \
--cc=kernel@collabora.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-staging@lists.linux.dev \
--cc=mchehab@kernel.org \
--cc=p.zabel@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox