From: Hans de Goede <hdegoede@redhat.com>
To: Mauro Carvalho Chehab <mchehab@kernel.org>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Andy Shevchenko <andy@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>, Kate Hsuan <hpa@redhat.com>,
Tsuchiya Yuto <kitakar@gmail.com>,
Yury Luneff <yury.lunev@gmail.com>,
Nable <nable.maininbox@googlemail.com>,
andrey.i.trufanov@gmail.com, Fabio Aiuto <fabioaiuto83@gmail.com>,
linux-media@vger.kernel.org, linux-staging@lists.linux.dev
Subject: [PATCH 7/9] media: atomisp: Move pad linking to atomisp_register_device_nodes()
Date: Thu, 18 May 2023 17:37:31 +0200 [thread overview]
Message-ID: <20230518153733.195306-8-hdegoede@redhat.com> (raw)
In-Reply-To: <20230518153733.195306-1-hdegoede@redhat.com>
atomisp_register_device_nodes() already iterates over the ports/sensors
in a loop and that loop already does not include the TPG input.
So we can simply setup the CSI2-port <-> ISP and sensor <-> CSI2-port
mediactl-pad links there instead of repeating the loop in
atomisp_create_pads_links(), which atomisp_register_device_nodes()
used to call later on.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
.../media/atomisp/pci/atomisp_subdev.c | 35 -------------------
.../media/atomisp/pci/atomisp_subdev.h | 1 -
.../staging/media/atomisp/pci/atomisp_v4l2.c | 16 ++++++++-
3 files changed, 15 insertions(+), 37 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/atomisp_subdev.c b/drivers/staging/media/atomisp/pci/atomisp_subdev.c
index c2ae77cd77a7..7985a0319a39 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_subdev.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_subdev.c
@@ -933,41 +933,6 @@ static int isp_subdev_init_entities(struct atomisp_sub_device *asd)
return asd->ctrl_handler.error;
}
-int atomisp_create_pads_links(struct atomisp_device *isp)
-{
- int i, ret;
-
- for (i = 0; i < ATOMISP_CAMERA_NR_PORTS; i++) {
- ret = media_create_pad_link(&isp->csi2_port[i].subdev.entity,
- CSI2_PAD_SOURCE, &isp->asd.subdev.entity,
- ATOMISP_SUBDEV_PAD_SINK, 0);
- if (ret < 0)
- return ret;
- }
-
- for (i = 0; i < isp->input_cnt; i++) {
- /* Don't create links for the test-pattern-generator */
- if (isp->inputs[i].type == TEST_PATTERN)
- continue;
-
- ret = media_create_pad_link(&isp->inputs[i].camera->entity, 0,
- &isp->csi2_port[isp->inputs[i].
- port].subdev.entity,
- CSI2_PAD_SINK,
- MEDIA_LNK_FL_ENABLED |
- MEDIA_LNK_FL_IMMUTABLE);
- if (ret < 0)
- return ret;
- }
-
- ret = media_create_pad_link(&isp->asd.subdev.entity, ATOMISP_SUBDEV_PAD_SOURCE,
- &isp->asd.video_out.vdev.entity, 0, 0);
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
static void atomisp_subdev_cleanup_entities(struct atomisp_sub_device *asd)
{
v4l2_ctrl_handler_free(&asd->ctrl_handler);
diff --git a/drivers/staging/media/atomisp/pci/atomisp_subdev.h b/drivers/staging/media/atomisp/pci/atomisp_subdev.h
index cd82554d5f65..c9f6561dbcb6 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_subdev.h
+++ b/drivers/staging/media/atomisp/pci/atomisp_subdev.h
@@ -366,6 +366,5 @@ int atomisp_subdev_register_subdev(struct atomisp_sub_device *asd,
struct v4l2_device *vdev);
int atomisp_subdev_init(struct atomisp_device *isp);
void atomisp_subdev_cleanup(struct atomisp_device *isp);
-int atomisp_create_pads_links(struct atomisp_device *isp);
#endif /* __ATOMISP_SUBDEV_H__ */
diff --git a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
index c668375e04ae..ef04effc66bf 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
@@ -943,6 +943,12 @@ static int atomisp_register_device_nodes(struct atomisp_device *isp)
int i, err;
for (i = 0; i < ATOMISP_CAMERA_NR_PORTS; i++) {
+ err = media_create_pad_link(&isp->csi2_port[i].subdev.entity,
+ CSI2_PAD_SOURCE, &isp->asd.subdev.entity,
+ ATOMISP_SUBDEV_PAD_SINK, 0);
+ if (err)
+ return err;
+
if (!isp->sensor_subdevs[i])
continue;
@@ -960,6 +966,13 @@ static int atomisp_register_device_nodes(struct atomisp_device *isp)
if (i == ATOMISP_CAMERA_PORT_PRIMARY)
input->motor = isp->motor;
+ err = media_create_pad_link(&input->camera->entity, 0,
+ &isp->csi2_port[i].subdev.entity,
+ CSI2_PAD_SINK,
+ MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE);
+ if (err)
+ return err;
+
isp->input_cnt++;
}
@@ -983,7 +996,8 @@ static int atomisp_register_device_nodes(struct atomisp_device *isp)
if (err)
return err;
- err = atomisp_create_pads_links(isp);
+ err = media_create_pad_link(&isp->asd.subdev.entity, ATOMISP_SUBDEV_PAD_SOURCE,
+ &isp->asd.video_out.vdev.entity, 0, 0);
if (err)
return err;
--
2.40.1
next prev parent reply other threads:[~2023-05-18 15:42 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-18 15:37 [PATCH 0/9] media: atomisp: Add support for v4l2-async sensor registration Hans de Goede
2023-05-18 15:37 ` [PATCH 1/9] media: atomisp: Drop MRFLD_PORT_NUM define Hans de Goede
2023-05-18 16:05 ` Andy Shevchenko
2023-05-18 15:37 ` [PATCH 2/9] media: atomisp: Remove unused fields from struct atomisp_input_subdev Hans de Goede
2023-05-18 15:37 ` [PATCH 3/9] media: atomisp: Remove atomisp_video_init() parametrization Hans de Goede
2023-05-18 15:37 ` [PATCH 4/9] media: atomisp: Rename __get_mipi_port() to atomisp_port_to_mipi_port() Hans de Goede
2023-05-18 15:37 ` [PATCH 5/9] media: atomisp: Store number of sensor lanes per port in struct atomisp_device Hans de Goede
2023-05-18 15:37 ` [PATCH 6/9] media: atomisp: Delay mapping sensors to inputs till atomisp_register_device_nodes() Hans de Goede
2023-05-18 15:37 ` Hans de Goede [this message]
2023-05-18 15:37 ` [PATCH 8/9] media: atomisp: Allow camera_mipi_info to be NULL Hans de Goede
2023-05-18 15:37 ` [PATCH 9/9] media: atomisp: Add support for v4l2-async sensor registration Hans de Goede
2023-05-18 17:36 ` Hans de Goede
2023-05-19 12:45 ` Andy Shevchenko
2023-05-19 13:19 ` Hans de Goede
2023-05-18 16:19 ` [PATCH 0/9] " Andy Shevchenko
2023-05-18 16:36 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230518153733.195306-8-hdegoede@redhat.com \
--to=hdegoede@redhat.com \
--cc=andrey.i.trufanov@gmail.com \
--cc=andy@kernel.org \
--cc=fabioaiuto83@gmail.com \
--cc=hpa@redhat.com \
--cc=kitakar@gmail.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=mchehab@kernel.org \
--cc=nable.maininbox@googlemail.com \
--cc=sakari.ailus@linux.intel.com \
--cc=yury.lunev@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox