From: Benjamin Gaignard <benjamin.gaignard@collabora.com>
To: mchehab@kernel.org, tfiga@chromium.org, m.szyprowski@samsung.com,
ming.qian@nxp.com, ezequiel@vanguardiasur.com.ar,
p.zabel@pengutronix.de, gregkh@linuxfoundation.org,
hverkuil-cisco@xs4all.nl, nicolas.dufresne@collabora.com
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org,
linux-arm-msm@vger.kernel.org,
linux-rockchip@lists.infradead.org,
linux-staging@lists.linux.dev, kernel@collabora.com,
Benjamin Gaignard <benjamin.gaignard@collabora.com>
Subject: [PATCH v6 12/18] media: verisilicon: Refactor postprocessor to store more buffers
Date: Fri, 1 Sep 2023 14:44:08 +0200 [thread overview]
Message-ID: <20230901124414.48497-13-benjamin.gaignard@collabora.com> (raw)
In-Reply-To: <20230901124414.48497-1-benjamin.gaignard@collabora.com>
Since vb2 queue can store than VB2_MAX_FRAME buffers postprocessor
buffer storage must be capable to store more buffers too.
Change static dec_q array to allocated array to be capable to store
up to queue 'max_allowed_buffers'.
Keep allocating queue 'num_buffers' at queue setup time but also allows
to allocate postprocessors buffers on the fly.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
---
drivers/media/platform/verisilicon/hantro.h | 7 +-
.../media/platform/verisilicon/hantro_drv.c | 4 +-
.../media/platform/verisilicon/hantro_hw.h | 4 +-
.../platform/verisilicon/hantro_postproc.c | 93 +++++++++++++++----
.../media/platform/verisilicon/hantro_v4l2.c | 2 +-
5 files changed, 85 insertions(+), 25 deletions(-)
diff --git a/drivers/media/platform/verisilicon/hantro.h b/drivers/media/platform/verisilicon/hantro.h
index 77aee9489516..0948b04a9f8d 100644
--- a/drivers/media/platform/verisilicon/hantro.h
+++ b/drivers/media/platform/verisilicon/hantro.h
@@ -469,11 +469,14 @@ hantro_get_dst_buf(struct hantro_ctx *ctx)
bool hantro_needs_postproc(const struct hantro_ctx *ctx,
const struct hantro_fmt *fmt);
+dma_addr_t
+hantro_postproc_get_dec_buf_addr(struct hantro_ctx *ctx, int index);
+
static inline dma_addr_t
hantro_get_dec_buf_addr(struct hantro_ctx *ctx, struct vb2_buffer *vb)
{
if (hantro_needs_postproc(ctx, ctx->vpu_dst_fmt))
- return ctx->postproc.dec_q[vb->index].dma;
+ return hantro_postproc_get_dec_buf_addr(ctx, vb->index);
return vb2_dma_contig_plane_dma_addr(vb, 0);
}
@@ -485,8 +488,8 @@ vb2_to_hantro_decoded_buf(struct vb2_buffer *buf)
void hantro_postproc_disable(struct hantro_ctx *ctx);
void hantro_postproc_enable(struct hantro_ctx *ctx);
+int hantro_postproc_init(struct hantro_ctx *ctx);
void hantro_postproc_free(struct hantro_ctx *ctx);
-int hantro_postproc_alloc(struct hantro_ctx *ctx);
int hanto_postproc_enum_framesizes(struct hantro_ctx *ctx,
struct v4l2_frmsizeenum *fsize);
diff --git a/drivers/media/platform/verisilicon/hantro_drv.c b/drivers/media/platform/verisilicon/hantro_drv.c
index 423fc85d79ee..18f56edee3fc 100644
--- a/drivers/media/platform/verisilicon/hantro_drv.c
+++ b/drivers/media/platform/verisilicon/hantro_drv.c
@@ -234,8 +234,10 @@ queue_init(void *priv, struct vb2_queue *src_vq, struct vb2_queue *dst_vq)
* The Kernel needs access to the JPEG destination buffer for the
* JPEG encoder to fill in the JPEG headers.
*/
- if (!ctx->is_encoder)
+ if (!ctx->is_encoder) {
dst_vq->dma_attrs |= DMA_ATTR_NO_KERNEL_MAPPING;
+ dst_vq->max_allowed_buffers = MAX_POSTPROC_BUFFERS;
+ }
dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
dst_vq->io_modes = VB2_MMAP | VB2_DMABUF;
diff --git a/drivers/media/platform/verisilicon/hantro_hw.h b/drivers/media/platform/verisilicon/hantro_hw.h
index 7f33f7b07ce4..292a76ef643e 100644
--- a/drivers/media/platform/verisilicon/hantro_hw.h
+++ b/drivers/media/platform/verisilicon/hantro_hw.h
@@ -40,6 +40,8 @@
#define AV1_MAX_FRAME_BUF_COUNT (V4L2_AV1_TOTAL_REFS_PER_FRAME + 1)
+#define MAX_POSTPROC_BUFFERS 64
+
struct hantro_dev;
struct hantro_ctx;
struct hantro_buf;
@@ -336,7 +338,7 @@ struct hantro_av1_dec_hw_ctx {
* @dec_q: References buffers, in decoder format.
*/
struct hantro_postproc_ctx {
- struct hantro_aux_buf dec_q[VB2_MAX_FRAME];
+ struct hantro_aux_buf dec_q[MAX_POSTPROC_BUFFERS];
};
/**
diff --git a/drivers/media/platform/verisilicon/hantro_postproc.c b/drivers/media/platform/verisilicon/hantro_postproc.c
index 0224ff68ab3f..e624cd98f41b 100644
--- a/drivers/media/platform/verisilicon/hantro_postproc.c
+++ b/drivers/media/platform/verisilicon/hantro_postproc.c
@@ -177,9 +177,11 @@ static int hantro_postproc_g2_enum_framesizes(struct hantro_ctx *ctx,
void hantro_postproc_free(struct hantro_ctx *ctx)
{
struct hantro_dev *vpu = ctx->dev;
+ struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
+ struct vb2_queue *queue = &m2m_ctx->cap_q_ctx.q;
unsigned int i;
- for (i = 0; i < VB2_MAX_FRAME; ++i) {
+ for (i = 0; i < queue->max_allowed_buffers; ++i) {
struct hantro_aux_buf *priv = &ctx->postproc.dec_q[i];
if (priv->cpu) {
@@ -190,20 +192,17 @@ void hantro_postproc_free(struct hantro_ctx *ctx)
}
}
-int hantro_postproc_alloc(struct hantro_ctx *ctx)
+static unsigned int hantro_postproc_buffer_size(struct hantro_ctx *ctx)
{
- struct hantro_dev *vpu = ctx->dev;
- struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
- struct vb2_queue *cap_queue = &m2m_ctx->cap_q_ctx.q;
- unsigned int num_buffers = cap_queue->num_buffers;
struct v4l2_pix_format_mplane pix_mp;
const struct hantro_fmt *fmt;
- unsigned int i, buf_size;
+ unsigned int buf_size;
/* this should always pick native format */
fmt = hantro_get_default_fmt(ctx, false, ctx->bit_depth, HANTRO_AUTO_POSTPROC);
if (!fmt)
- return -EINVAL;
+ return 0;
+
v4l2_fill_pixfmt_mp(&pix_mp, fmt->fourcc, ctx->src_fmt.width,
ctx->src_fmt.height);
@@ -221,23 +220,77 @@ int hantro_postproc_alloc(struct hantro_ctx *ctx)
buf_size += hantro_av1_mv_size(pix_mp.width,
pix_mp.height);
- for (i = 0; i < num_buffers; ++i) {
- struct hantro_aux_buf *priv = &ctx->postproc.dec_q[i];
+ return buf_size;
+}
+
+static int hantro_postproc_alloc(struct hantro_ctx *ctx, int index)
+{
+ struct hantro_dev *vpu = ctx->dev;
+ struct hantro_aux_buf *priv = &ctx->postproc.dec_q[index];
+ unsigned int buf_size = hantro_postproc_buffer_size(ctx);
+
+ if (!buf_size)
+ return -EINVAL;
+
+ /*
+ * The buffers on this queue are meant as intermediate
+ * buffers for the decoder, so no mapping is needed.
+ */
+ priv->attrs = DMA_ATTR_NO_KERNEL_MAPPING;
+ priv->cpu = dma_alloc_attrs(vpu->dev, buf_size, &priv->dma,
+ GFP_KERNEL, priv->attrs);
+ if (!priv->cpu)
+ return -ENOMEM;
+ priv->size = buf_size;
+
+ return 0;
+}
- /*
- * The buffers on this queue are meant as intermediate
- * buffers for the decoder, so no mapping is needed.
- */
- priv->attrs = DMA_ATTR_NO_KERNEL_MAPPING;
- priv->cpu = dma_alloc_attrs(vpu->dev, buf_size, &priv->dma,
- GFP_KERNEL, priv->attrs);
- if (!priv->cpu)
- return -ENOMEM;
- priv->size = buf_size;
+int hantro_postproc_init(struct hantro_ctx *ctx)
+{
+ struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
+ struct vb2_queue *cap_queue = &m2m_ctx->cap_q_ctx.q;
+ unsigned int num_buffers = cap_queue->num_buffers;
+ unsigned int i;
+ int ret;
+
+ for (i = 0; i < num_buffers; i++) {
+ ret = hantro_postproc_alloc(ctx, i);
+ if (ret)
+ return ret;
}
+
return 0;
}
+dma_addr_t
+hantro_postproc_get_dec_buf_addr(struct hantro_ctx *ctx, int index)
+{
+ struct hantro_aux_buf *priv = &ctx->postproc.dec_q[index];
+ unsigned int buf_size = hantro_postproc_buffer_size(ctx);
+ struct hantro_dev *vpu = ctx->dev;
+ int ret;
+
+ if (priv->size < buf_size && priv->cpu) {
+ /* buffer is too small, release it */
+ dma_free_attrs(vpu->dev, priv->size, priv->cpu,
+ priv->dma, priv->attrs);
+ priv->cpu = NULL;
+ }
+
+ if (!priv->cpu) {
+ /* buffer not already allocated, try getting a new one */
+ ret = hantro_postproc_alloc(ctx, index);
+ if (ret)
+ return 0;
+ }
+
+ if (!priv->cpu)
+ return 0;
+
+ return priv->dma;
+}
+
static void hantro_postproc_g1_disable(struct hantro_ctx *ctx)
{
struct hantro_dev *vpu = ctx->dev;
diff --git a/drivers/media/platform/verisilicon/hantro_v4l2.c b/drivers/media/platform/verisilicon/hantro_v4l2.c
index b3ae037a50f6..f0d8b165abcd 100644
--- a/drivers/media/platform/verisilicon/hantro_v4l2.c
+++ b/drivers/media/platform/verisilicon/hantro_v4l2.c
@@ -933,7 +933,7 @@ static int hantro_start_streaming(struct vb2_queue *q, unsigned int count)
}
if (hantro_needs_postproc(ctx, ctx->vpu_dst_fmt)) {
- ret = hantro_postproc_alloc(ctx);
+ ret = hantro_postproc_init(ctx);
if (ret)
goto err_codec_exit;
}
--
2.39.2
next prev parent reply other threads:[~2023-09-01 12:44 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-01 12:43 [PATCH v6 00/18] Add DELETE_BUF ioctl Benjamin Gaignard
2023-09-01 12:43 ` [PATCH v6 01/18] media: videobuf2: Rework offset 'cookie' encoding pattern Benjamin Gaignard
2023-09-01 12:43 ` [PATCH v6 02/18] media: videobuf2: Stop spamming kernel log with all queue counter Benjamin Gaignard
2023-09-04 15:17 ` Hans Verkuil
2023-09-01 12:43 ` [PATCH v6 03/18] media: videobuf2: Use vb2_buffer instead of index Benjamin Gaignard
2023-09-01 12:44 ` [PATCH v6 04/18] media: amphion: Use vb2_get_buffer() instead of directly access to buffers array Benjamin Gaignard
2023-09-01 12:44 ` [PATCH v6 05/18] media: mediatek: jpeg: " Benjamin Gaignard
2023-09-01 12:44 ` [PATCH v6 06/18] media: mediatek: vdec: " Benjamin Gaignard
2023-09-01 12:44 ` [PATCH v6 07/18] media: sti: hva: " Benjamin Gaignard
2023-09-01 12:44 ` [PATCH v6 08/18] media: visl: " Benjamin Gaignard
2023-09-01 12:44 ` [PATCH v6 09/18] media: atomisp: " Benjamin Gaignard
2023-09-01 12:44 ` [PATCH v6 10/18] media: videobuf2: Access vb2_queue bufs array through helper functions Benjamin Gaignard
2023-09-01 12:44 ` [PATCH v6 11/18] media: videobuf2: Be more flexible on the number of queue stored buffers Benjamin Gaignard
2023-09-04 11:24 ` Hans Verkuil
2023-09-04 11:46 ` Benjamin Gaignard
2023-09-04 14:09 ` Hans Verkuil
2023-09-04 15:05 ` Hans Verkuil
2023-09-04 15:19 ` Hans Verkuil
2023-09-01 12:44 ` Benjamin Gaignard [this message]
2023-09-01 12:44 ` [PATCH v6 13/18] media: verisilicon: Store chroma and motion vectors offset Benjamin Gaignard
2023-09-01 12:44 ` [PATCH v6 14/18] media: verisilicon: vp9: Use destination buffer height to compute chroma offset Benjamin Gaignard
2023-09-10 13:21 ` Jernej Škrabec
2023-09-11 8:55 ` Benjamin Gaignard
2023-09-11 16:36 ` Jernej Škrabec
2023-09-12 8:41 ` Benjamin Gaignard
2023-09-12 15:26 ` Nicolas Dufresne
2023-09-12 15:51 ` Jernej Škrabec
2023-09-01 12:44 ` [PATCH v6 15/18] media: verisilicon: postproc: Fix down scale test Benjamin Gaignard
2023-09-01 12:44 ` [PATCH v6 16/18] media: verisilicon: vp9: Allow to change resolution while streaming Benjamin Gaignard
2023-09-01 12:44 ` [PATCH v6 17/18] media: v4l2: Add DELETE_BUFS ioctl Benjamin Gaignard
2023-09-05 8:17 ` Hans Verkuil
2023-09-05 8:43 ` Hans Verkuil
2023-09-05 14:28 ` Benjamin Gaignard
2023-09-05 14:37 ` Hans Verkuil
2023-09-01 12:44 ` [PATCH v6 18/18] media: v4l2: Add mem2mem helpers for " Benjamin Gaignard
2023-09-04 15:23 ` [PATCH v6 00/18] Add DELETE_BUF ioctl Hans Verkuil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230901124414.48497-13-benjamin.gaignard@collabora.com \
--to=benjamin.gaignard@collabora.com \
--cc=ezequiel@vanguardiasur.com.ar \
--cc=gregkh@linuxfoundation.org \
--cc=hverkuil-cisco@xs4all.nl \
--cc=kernel@collabora.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-staging@lists.linux.dev \
--cc=m.szyprowski@samsung.com \
--cc=mchehab@kernel.org \
--cc=ming.qian@nxp.com \
--cc=nicolas.dufresne@collabora.com \
--cc=p.zabel@pengutronix.de \
--cc=tfiga@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox