From: Umang Jain <umang.jain@ideasonboard.com>
To: linux-staging@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-rpi-kernel@lists.infradead.org,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Stefan Wahren <stefan.wahren@i2se.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Florian Fainelli <f.fainelli@gmail.com>,
Adrien Thierry <athierry@redhat.com>,
Dan Carpenter <error27@gmail.com>,
Dave Stevenson <dave.stevenson@raspberrypi.com>,
Kieran Bingham <kieran.bingham@ideasonboard.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Umang Jain <umang.jain@ideasonboard.com>
Subject: [PATCH v12 6/6] staging: bcm2835-audio: Register bcm2835-audio with vchiq_bus_type
Date: Sat, 23 Sep 2023 20:02:00 +0530 [thread overview]
Message-ID: <20230923143200.268063-7-umang.jain@ideasonboard.com> (raw)
In-Reply-To: <20230923143200.268063-1-umang.jain@ideasonboard.com>
Similar to how bcm2385-camera device is registered, register the
bcm2835-audio with vchiq_bus_type as well.
Since we moved away bcm2835-audio from platform driver/device,
we have to set the DMA mask explicitly. Set the DMA mask at probe
time.
Meanwhile at it, change the name and module alias from "bcm2835_audio"
to "bcm2835-audio" to be consistent with bcm2835-camera device. This
does not brings any functional change as '-' and '_' are
interchangeable as per modprobe man pages.
Also, drop vchiq_register_child() helper which is no longer
needed after this patch.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
---
.../vc04_services/bcm2835-audio/bcm2835.c | 19 ++++++-------
.../interface/vchiq_arm/vchiq_arm.c | 28 ++-----------------
2 files changed, 12 insertions(+), 35 deletions(-)
diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
index f3ad2543d1c0..06bdc7673d4b 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
@@ -1,13 +1,12 @@
// SPDX-License-Identifier: GPL-2.0
/* Copyright 2011 Broadcom Corporation. All rights reserved. */
-#include <linux/platform_device.h>
-
#include <linux/dma-mapping.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/module.h>
+#include "../interface/vchiq_arm/vchiq_bus.h"
#include "bcm2835.h"
static bool enable_hdmi;
@@ -269,9 +268,9 @@ static int snd_add_child_devices(struct device *device, u32 numchans)
return 0;
}
-static int snd_bcm2835_alsa_probe(struct platform_device *pdev)
+static int snd_bcm2835_alsa_probe(struct vchiq_device *device)
{
- struct device *dev = &pdev->dev;
+ struct device *dev = &device->dev;
int err;
err = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
@@ -299,32 +298,32 @@ static int snd_bcm2835_alsa_probe(struct platform_device *pdev)
#ifdef CONFIG_PM
-static int snd_bcm2835_alsa_suspend(struct platform_device *pdev,
+static int snd_bcm2835_alsa_suspend(struct vchiq_device *device,
pm_message_t state)
{
return 0;
}
-static int snd_bcm2835_alsa_resume(struct platform_device *pdev)
+static int snd_bcm2835_alsa_resume(struct vchiq_device *device)
{
return 0;
}
#endif
-static struct platform_driver bcm2835_alsa_driver = {
+static struct vchiq_driver bcm2835_alsa_driver = {
.probe = snd_bcm2835_alsa_probe,
#ifdef CONFIG_PM
.suspend = snd_bcm2835_alsa_suspend,
.resume = snd_bcm2835_alsa_resume,
#endif
.driver = {
- .name = "bcm2835_audio",
+ .name = "bcm2835-audio",
},
};
-module_platform_driver(bcm2835_alsa_driver);
+module_vchiq_driver(bcm2835_alsa_driver);
MODULE_AUTHOR("Dom Cobley");
MODULE_DESCRIPTION("Alsa driver for BCM2835 chip");
MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:bcm2835_audio");
+MODULE_ALIAS("bcm2835-audio");
diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
index 886025f0a452..eef9c8c06e66 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
@@ -67,12 +67,12 @@ int vchiq_susp_log_level = VCHIQ_LOG_ERROR;
DEFINE_SPINLOCK(msg_queue_spinlock);
struct vchiq_state g_state;
-static struct platform_device *bcm2835_audio;
/*
* The devices implemented in the VCHIQ firmware are not discoverable,
* so we need to maintain a list of them in order to register them with
* the interface.
*/
+static struct vchiq_device *bcm2835_audio;
static struct vchiq_device *bcm2835_camera;
struct vchiq_drvdata {
@@ -1776,28 +1776,6 @@ static const struct of_device_id vchiq_of_match[] = {
};
MODULE_DEVICE_TABLE(of, vchiq_of_match);
-static struct platform_device *
-vchiq_register_child(struct platform_device *pdev, const char *name)
-{
- struct platform_device_info pdevinfo;
- struct platform_device *child;
-
- memset(&pdevinfo, 0, sizeof(pdevinfo));
-
- pdevinfo.parent = &pdev->dev;
- pdevinfo.name = name;
- pdevinfo.id = PLATFORM_DEVID_NONE;
- pdevinfo.dma_mask = DMA_BIT_MASK(32);
-
- child = platform_device_register_full(&pdevinfo);
- if (IS_ERR(child)) {
- dev_warn(&pdev->dev, "%s not registered\n", name);
- child = NULL;
- }
-
- return child;
-}
-
static int vchiq_probe(struct platform_device *pdev)
{
struct device_node *fw_node;
@@ -1845,7 +1823,7 @@ static int vchiq_probe(struct platform_device *pdev)
goto error_exit;
}
- bcm2835_audio = vchiq_register_child(pdev, "bcm2835_audio");
+ bcm2835_audio = vchiq_device_register(&pdev->dev, "bcm2835-audio");
bcm2835_camera = vchiq_device_register(&pdev->dev, "bcm2835-camera");
return 0;
@@ -1858,7 +1836,7 @@ static int vchiq_probe(struct platform_device *pdev)
static void vchiq_remove(struct platform_device *pdev)
{
- platform_device_unregister(bcm2835_audio);
+ vchiq_device_unregister(bcm2835_audio);
vchiq_device_unregister(bcm2835_camera);
vchiq_debugfs_deinit();
vchiq_deregister_chrdev();
--
2.40.1
next prev parent reply other threads:[~2023-09-23 14:32 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-23 14:31 [PATCH v12 0/6] staging: vc04_services: vchiq: Register devices with a custom bus_type Umang Jain
2023-09-23 14:31 ` [PATCH v12 1/6] staging: vc04_services: bcm2835-camera: Explicitly set DMA mask Umang Jain
2023-09-23 14:31 ` [PATCH v12 2/6] staging: vc04_services: bcm2835-audio: " Umang Jain
2023-09-23 14:31 ` [PATCH v12 3/6] staging: vc04_services: vchiq_arm: Add new bus type and device type Umang Jain
2023-10-05 8:03 ` Greg Kroah-Hartman
2023-09-23 14:31 ` [PATCH v12 4/6] staging: vc04_services: vchiq_arm: Register vchiq_bus_type Umang Jain
2023-09-23 14:31 ` [PATCH v12 5/6] staging: bcm2835-camera: Register bcm2835-camera with vchiq_bus_type Umang Jain
2023-10-05 8:04 ` Greg Kroah-Hartman
2023-10-09 4:20 ` Umang Jain
2023-10-09 10:12 ` Greg Kroah-Hartman
2023-09-23 14:32 ` Umang Jain [this message]
2023-10-05 8:04 ` [PATCH v12 6/6] staging: bcm2835-audio: Register bcm2835-audio " Greg Kroah-Hartman
2023-09-23 14:33 ` [PATCH v12 0/6] staging: vc04_services: vchiq: Register devices with a custom bus_type Umang Jain
2023-09-30 10:10 ` Stefan Wahren
2023-10-05 8:05 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230923143200.268063-7-umang.jain@ideasonboard.com \
--to=umang.jain@ideasonboard.com \
--cc=athierry@redhat.com \
--cc=dave.stevenson@raspberrypi.com \
--cc=error27@gmail.com \
--cc=f.fainelli@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=kieran.bingham@ideasonboard.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=linux-staging@lists.linux.dev \
--cc=stefan.wahren@i2se.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox