[PATCH v2 25/32] staging/sm750fb: Declare fb_ops as constant

[PATCH v2 25/32] staging/sm750fb: Declare fb_ops as constant

[Thomas Zimmermann]

Split up lynxfb_ops and declare each as constant. The fb_ops
instance used to be modified while initializing the driver. It is
now constant and the driver picks the correct instance, depending
on the settings for acceleration and cursor support.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-staging@lists.linux.dev
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
---
 drivers/staging/sm750fb/sm750.c | 59 +++++++++++++++++++++++++++------
 1 file changed, 49 insertions(+), 10 deletions(-)

diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c
index 79bcd5bd49380..35098516f53c9 100644
--- a/drivers/staging/sm750fb/sm750.c
+++ b/drivers/staging/sm750fb/sm750.c
@@ -663,16 +663,53 @@ static int sm750fb_set_drv(struct lynxfb_par *par)
 	return ret;
 }
 
-static struct fb_ops lynxfb_ops = {
+static const struct fb_ops lynxfb_ops = {
 	.owner = THIS_MODULE,
 	.fb_check_var =  lynxfb_ops_check_var,
 	.fb_set_par = lynxfb_ops_set_par,
 	.fb_setcolreg = lynxfb_ops_setcolreg,
 	.fb_blank = lynxfb_ops_blank,
+	.fb_pan_display = lynxfb_ops_pan_display,
 	.fb_fillrect = cfb_fillrect,
 	.fb_imageblit = cfb_imageblit,
 	.fb_copyarea = cfb_copyarea,
-	/* cursor */
+};
+
+static const struct fb_ops lynxfb_ops_with_cursor = {
+	.owner = THIS_MODULE,
+	.fb_check_var =  lynxfb_ops_check_var,
+	.fb_set_par = lynxfb_ops_set_par,
+	.fb_setcolreg = lynxfb_ops_setcolreg,
+	.fb_blank = lynxfb_ops_blank,
+	.fb_pan_display = lynxfb_ops_pan_display,
+	.fb_fillrect = cfb_fillrect,
+	.fb_copyarea = cfb_copyarea,
+	.fb_imageblit = cfb_imageblit,
+	.fb_cursor = lynxfb_ops_cursor,
+};
+
+static const struct fb_ops lynxfb_ops_accel = {
+	.owner = THIS_MODULE,
+	.fb_check_var =  lynxfb_ops_check_var,
+	.fb_set_par = lynxfb_ops_set_par,
+	.fb_setcolreg = lynxfb_ops_setcolreg,
+	.fb_blank = lynxfb_ops_blank,
+	.fb_pan_display = lynxfb_ops_pan_display,
+	.fb_fillrect = lynxfb_ops_fillrect,
+	.fb_copyarea = lynxfb_ops_copyarea,
+	.fb_imageblit = lynxfb_ops_imageblit,
+};
+
+static const struct fb_ops lynxfb_ops_accel_with_cursor = {
+	.owner = THIS_MODULE,
+	.fb_check_var =  lynxfb_ops_check_var,
+	.fb_set_par = lynxfb_ops_set_par,
+	.fb_setcolreg = lynxfb_ops_setcolreg,
+	.fb_blank = lynxfb_ops_blank,
+	.fb_pan_display = lynxfb_ops_pan_display,
+	.fb_fillrect = lynxfb_ops_fillrect,
+	.fb_copyarea = lynxfb_ops_copyarea,
+	.fb_imageblit = lynxfb_ops_imageblit,
 	.fb_cursor = lynxfb_ops_cursor,
 };
 
@@ -714,7 +751,6 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
 	par->index = index;
 	output->channel = &crtc->channel;
 	sm750fb_set_drv(par);
-	lynxfb_ops.fb_pan_display = lynxfb_ops_pan_display;
 
 	/*
 	 * set current cursor variable and proc pointer,
@@ -731,19 +767,22 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
 	crtc->cursor.vstart = sm750_dev->pvMem + crtc->cursor.offset;
 
 	memset_io(crtc->cursor.vstart, 0, crtc->cursor.size);
-	if (!g_hwcursor) {
-		lynxfb_ops.fb_cursor = NULL;
+	if (!g_hwcursor)
 		sm750_hw_cursor_disable(&crtc->cursor);
-	}
 
 	/* set info->fbops, must be set before fb_find_mode */
 	if (!sm750_dev->accel_off) {
 		/* use 2d acceleration */
-		lynxfb_ops.fb_fillrect = lynxfb_ops_fillrect;
-		lynxfb_ops.fb_copyarea = lynxfb_ops_copyarea;
-		lynxfb_ops.fb_imageblit = lynxfb_ops_imageblit;
+		if (!g_hwcursor)
+			info->fbops = &lynxfb_ops_accel;
+		else
+			info->fbops = &lynxfb_ops_accel_with_cursor;
+	} else {
+		if (!g_hwcursor)
+			info->fbops = &lynxfb_ops;
+		else
+			info->fbops = &lynxfb_ops_with_cursor;
 	}
-	info->fbops = &lynxfb_ops;
 
 	if (!g_fbmode[index]) {
 		g_fbmode[index] = g_def_fbmode;
-- 
2.43.0

[PATCH v2 26/32] staging/sm750fb: Initialize fb_ops with fbdev macros

[Thomas Zimmermann]

Initialize all instances of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default I/O-memory-based implementation to be invoked; hence
requiring the I/O helpers to be built in any case. Setting all
callbacks in all drivers explicitly will allow to make the I/O
helpers optional. This benefits systems that do not use these
functions.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-staging@lists.linux.dev
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
---
 drivers/staging/sm750fb/sm750.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c
index 35098516f53c9..04c1b32a22c5e 100644
--- a/drivers/staging/sm750fb/sm750.c
+++ b/drivers/staging/sm750fb/sm750.c
@@ -665,31 +665,28 @@ static int sm750fb_set_drv(struct lynxfb_par *par)
 
 static const struct fb_ops lynxfb_ops = {
 	.owner = THIS_MODULE,
+	FB_DEFAULT_IOMEM_OPS,
 	.fb_check_var =  lynxfb_ops_check_var,
 	.fb_set_par = lynxfb_ops_set_par,
 	.fb_setcolreg = lynxfb_ops_setcolreg,
 	.fb_blank = lynxfb_ops_blank,
 	.fb_pan_display = lynxfb_ops_pan_display,
-	.fb_fillrect = cfb_fillrect,
-	.fb_imageblit = cfb_imageblit,
-	.fb_copyarea = cfb_copyarea,
 };
 
 static const struct fb_ops lynxfb_ops_with_cursor = {
 	.owner = THIS_MODULE,
+	FB_DEFAULT_IOMEM_OPS,
 	.fb_check_var =  lynxfb_ops_check_var,
 	.fb_set_par = lynxfb_ops_set_par,
 	.fb_setcolreg = lynxfb_ops_setcolreg,
 	.fb_blank = lynxfb_ops_blank,
 	.fb_pan_display = lynxfb_ops_pan_display,
-	.fb_fillrect = cfb_fillrect,
-	.fb_copyarea = cfb_copyarea,
-	.fb_imageblit = cfb_imageblit,
 	.fb_cursor = lynxfb_ops_cursor,
 };
 
 static const struct fb_ops lynxfb_ops_accel = {
 	.owner = THIS_MODULE,
+	__FB_DEFAULT_IOMEM_OPS_RDWR,
 	.fb_check_var =  lynxfb_ops_check_var,
 	.fb_set_par = lynxfb_ops_set_par,
 	.fb_setcolreg = lynxfb_ops_setcolreg,
@@ -698,10 +695,12 @@ static const struct fb_ops lynxfb_ops_accel = {
 	.fb_fillrect = lynxfb_ops_fillrect,
 	.fb_copyarea = lynxfb_ops_copyarea,
 	.fb_imageblit = lynxfb_ops_imageblit,
+	__FB_DEFAULT_IOMEM_OPS_MMAP,
 };
 
 static const struct fb_ops lynxfb_ops_accel_with_cursor = {
 	.owner = THIS_MODULE,
+	__FB_DEFAULT_IOMEM_OPS_RDWR,
 	.fb_check_var =  lynxfb_ops_check_var,
 	.fb_set_par = lynxfb_ops_set_par,
 	.fb_setcolreg = lynxfb_ops_setcolreg,
@@ -711,6 +710,7 @@ static const struct fb_ops lynxfb_ops_accel_with_cursor = {
 	.fb_copyarea = lynxfb_ops_copyarea,
 	.fb_imageblit = lynxfb_ops_imageblit,
 	.fb_cursor = lynxfb_ops_cursor,
+	__FB_DEFAULT_IOMEM_OPS_MMAP,
 };
 
 static int lynxfb_set_fbinfo(struct fb_info *info, int index)
-- 
2.43.0

Re: [PATCH v2 25/32] staging/sm750fb: Declare fb_ops as constant

[Greg Kroah-Hartman]

On Mon, Nov 27, 2023 at 02:15:54PM +0100, Thomas Zimmermann wrote:
> Split up lynxfb_ops and declare each as constant. The fb_ops
> instance used to be modified while initializing the driver. It is
> now constant and the driver picks the correct instance, depending
> on the settings for acceleration and cursor support.
> 
> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
> Cc: Teddy Wang <teddy.wang@siliconmotion.com>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: linux-staging@lists.linux.dev
> Acked-by: Javier Martinez Canillas <javierm@redhat.com>
> ---
>  drivers/staging/sm750fb/sm750.c | 59 +++++++++++++++++++++++++++------
>  1 file changed, 49 insertions(+), 10 deletions(-)

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Re: [PATCH v2 26/32] staging/sm750fb: Initialize fb_ops with fbdev macros

[Greg Kroah-Hartman]

On Mon, Nov 27, 2023 at 02:15:55PM +0100, Thomas Zimmermann wrote:
> Initialize all instances of struct fb_ops with fbdev initializer
> macros for framebuffers in I/O address space. Set the read/write,
> draw and mmap callbacks to the correct implementation and avoid
> implicit defaults. Also select the necessary helpers in Kconfig.
> 
> Fbdev drivers sometimes rely on the callbacks being NULL for a
> default I/O-memory-based implementation to be invoked; hence
> requiring the I/O helpers to be built in any case. Setting all
> callbacks in all drivers explicitly will allow to make the I/O
> helpers optional. This benefits systems that do not use these
> functions.
> 
> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
> Cc: Teddy Wang <teddy.wang@siliconmotion.com>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: linux-staging@lists.linux.dev
> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>