[PATCH] staging: gpib: Use min for calculating transfer length

[Dave Penkler <dpenkler@gmail.com>]

In the accel read and write functions the transfer length
was being calculated by an if statement setting it to
the lesser of the remaining bytes to read/write and the
fifo size.

Replace both instances with min() which is clearer and
more compact.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Closes: https://lore.kernel.org/r/202501182153.qHfL4Fbc-lkp@intel.com/
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
---
 drivers/staging/gpib/agilent_82350b/agilent_82350b.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

diff --git a/drivers/staging/gpib/agilent_82350b/agilent_82350b.c b/drivers/staging/gpib/agilent_82350b/agilent_82350b.c
index 3f4f95b7fe34..0ba592dc9849 100644
--- a/drivers/staging/gpib/agilent_82350b/agilent_82350b.c
+++ b/drivers/staging/gpib/agilent_82350b/agilent_82350b.c
@@ -66,10 +66,7 @@ int agilent_82350b_accel_read(gpib_board_t *board, uint8_t *buffer, size_t lengt
 		int j;
 		int count;
 
-		if (num_fifo_bytes - i < agilent_82350b_fifo_size)
-			block_size = num_fifo_bytes - i;
-		else
-			block_size = agilent_82350b_fifo_size;
+		block_size = min(num_fifo_bytes - i, agilent_82350b_fifo_size);
 		set_transfer_counter(a_priv, block_size);
 		writeb(ENABLE_TI_TO_SRAM | DIRECTION_GPIB_TO_HOST,
 		       a_priv->gpib_base + SRAM_ACCESS_CONTROL_REG);
@@ -200,10 +197,7 @@ int agilent_82350b_accel_write(gpib_board_t *board, uint8_t *buffer, size_t leng
 	for (i = 1; i < fifotransferlength;) {
 		clear_bit(WRITE_READY_BN, &tms_priv->state);
 
-		if (fifotransferlength - i < agilent_82350b_fifo_size)
-			block_size = fifotransferlength - i;
-		else
-			block_size = agilent_82350b_fifo_size;
+		block_size = min(fifotransferlength - i, agilent_82350b_fifo_size);
 		set_transfer_counter(a_priv, block_size);
 		for (j = 0; j < block_size; ++j, ++i) {
 			// load data into board's sram
-- 
2.47.1