[PATCH v1 06/23] staging: gpib: gpib_types: u8 over uint8_t

Michael Rubin
2025-04-09T18:10:03Z

drivers/staging/gpib/include/gpib_types.h | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/staging/gpib/include/gpib_types.h b/drivers/staging/gpib/include/gpib_types.h
index 0dbe45894884..62ce174add85 100644
--- a/drivers/staging/gpib/include/gpib_types.h
+++ b/drivers/staging/gpib/include/gpib_types.h
@@ -67,19 +67,19 @@ struct gpib_interface {
* return indicates error.
* nbytes returns number of bytes read
*/
- int (*read)(struct gpib_board *board, uint8_t *buffer, size_t length, int *end,
+ int (*read)(struct gpib_board *board, u8 *buffer, size_t length, int *end,
size_t *bytes_read);
/* write() should write 'length' bytes from buffer to the bus.
* If the boolean value send_eoi is nonzero, then EOI should
* be sent along with the last byte. Returns number of bytes
* written or negative value on error.
*/
- int (*write)(struct gpib_board *board, uint8_t *buffer, size_t length, int send_eoi,
+ int (*write)(struct gpib_board *board, u8 *buffer, size_t length, int send_eoi,
size_t *bytes_written);
/* command() writes the command bytes in 'buffer' to the bus
* Returns zero on success or negative value on error.
*/
- int (*command)(struct gpib_board *board, uint8_t *buffer, size_t length,
+ int (*command)(struct gpib_board *board, u8 *buffer, size_t length,
size_t *bytes_written);
/* Take control (assert ATN). If 'asyncronous' is nonzero, take
* control asyncronously (assert ATN immediately without waiting
@@ -106,13 +106,13 @@ struct gpib_interface {
* with the eos bytes. Otherwise only the 7 least significant
* bits are compared.
*/
- int (*enable_eos)(struct gpib_board *board, uint8_t eos, int compare_8_bits);
+ int (*enable_eos)(struct gpib_board *board, u8 eos, int compare_8_bits);
/* disable END on eos byte (END on EOI only)*/
void (*disable_eos)(struct gpib_board *board);
/* configure parallel poll */
- void (*parallel_poll_configure)(struct gpib_board *board, uint8_t configuration);
+ void (*parallel_poll_configure)(struct gpib_board *board, u8 configuration);
/* conduct parallel poll */
- int (*parallel_poll)(struct gpib_board *board, uint8_t *result);
+ int (*parallel_poll)(struct gpib_board *board, u8 *result);
/* set/clear ist (individual status bit) */
void (*parallel_poll_response)(struct gpib_board *board, int ist);
/* select local parallel poll configuration mode PP2 versus remote PP1 */
@@ -148,7 +148,7 @@ struct gpib_interface {
* by IEEE 488.2 section 11.3.3.4.3 "Allowed Coupled Control of
* STB, reqt, and reqf".
*/
- void (*serial_poll_response)(struct gpib_board *board, uint8_t status_byte);
+ void (*serial_poll_response)(struct gpib_board *board, u8 status_byte);
/* Sets the byte the board should send in response to a serial poll.
* This function should also request service via IEEE 488.2 reqt/reqf
* based on MSS (bit 6 of the status_byte) and new_reason_for_service.
@@ -163,11 +163,11 @@ struct gpib_interface {
* If this method is left NULL by the driver, then the user library
* function ibrsv2 will not work.
*/
- void (*serial_poll_response2)(struct gpib_board *board, uint8_t status_byte,
+ void (*serial_poll_response2)(struct gpib_board *board, u8 status_byte,
int new_reason_for_service);
/* returns the byte the board will send in response to a serial poll.
*/
- uint8_t (*serial_poll_status)(struct gpib_board *board);
+ u8 (*serial_poll_status)(struct gpib_board *board);
/* adjust T1 delay */
int (*t1_delay)(struct gpib_board *board, unsigned int nano_sec);
/* go to local mode */
--
2.43.0