From: Ruben Wauters <rubenru09@aol.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Sudip Mukherjee <sudipm.mukherjee@gmail.com>,
Teddy Wang <teddy.wang@siliconmotion.com>,
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Cc: Ruben Wauters <rubenru09@aol.com>,
linux-fbdev@vger.kernel.org, linux-staging@lists.linux.dev,
linux-kernel@vger.kernel.org
Subject: [PATCH 7/8] staging: sm750fb: rename detectReg to detect_reg
Date: Thu, 17 Apr 2025 20:02:55 +0100 [thread overview]
Message-ID: <20250417190302.13811-8-rubenru09@aol.com> (raw)
In-Reply-To: <20250417190302.13811-1-rubenru09@aol.com>
Renames detectReg to detect_reg in a few functions
Fixes checkpatch.pl's camel case check
Signed-off-by: Ruben Wauters <rubenru09@aol.com>
---
drivers/staging/sm750fb/ddk750_sii164.c | 38 ++++++++++++-------------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_sii164.c b/drivers/staging/sm750fb/ddk750_sii164.c
index 2ca72bfc67f2..769cbe768c49 100644
--- a/drivers/staging/sm750fb/ddk750_sii164.c
+++ b/drivers/staging/sm750fb/ddk750_sii164.c
@@ -289,28 +289,28 @@ void sii164_set_power(unsigned char power)
static
void sii164_select_hot_plug_detection_mode(enum sii164_hot_plug_mode hot_plug_mode)
{
- unsigned char detectReg;
+ unsigned char detect_reg;
- detectReg = sm750_hw_i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT) &
- ~SII164_DETECT_MONITOR_SENSE_OUTPUT_FLAG;
+ detect_reg = sm750_hw_i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT) &
+ ~SII164_DETECT_MONITOR_SENSE_OUTPUT_FLAG;
switch (hot_plug_mode) {
case SII164_HOTPLUG_DISABLE:
- detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HIGH;
+ detect_reg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HIGH;
break;
case SII164_HOTPLUG_USE_MDI:
- detectReg &= ~SII164_DETECT_INTERRUPT_MASK;
- detectReg |= SII164_DETECT_INTERRUPT_BY_HTPLG_PIN;
- detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_MDI;
+ detect_reg &= ~SII164_DETECT_INTERRUPT_MASK;
+ detect_reg |= SII164_DETECT_INTERRUPT_BY_HTPLG_PIN;
+ detect_reg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_MDI;
break;
case SII164_HOTPLUG_USE_RSEN:
- detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_RSEN;
+ detect_reg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_RSEN;
break;
case SII164_HOTPLUG_USE_HTPLG:
- detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HTPLG;
+ detect_reg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HTPLG;
break;
}
- sm750_hw_i2c_write_reg(SII164_I2C_ADDRESS, SII164_DETECT, detectReg);
+ sm750_hw_i2c_write_reg(SII164_I2C_ADDRESS, SII164_DETECT, detect_reg);
}
/*
@@ -321,9 +321,9 @@ void sii164_select_hot_plug_detection_mode(enum sii164_hot_plug_mode hot_plug_mo
*/
void sii164_enable_hot_plug_detection(unsigned char enable_hot_plug)
{
- unsigned char detectReg;
+ unsigned char detect_reg;
- detectReg = sm750_hw_i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT);
+ detect_reg = sm750_hw_i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT);
/* Depending on each DVI controller, need to enable the hot plug based
* on each individual chip design.
@@ -364,11 +364,11 @@ unsigned char sii164_is_connected(void)
*/
unsigned char sii164_check_interrupt(void)
{
- unsigned char detectReg;
+ unsigned char detect_reg;
- detectReg = sm750_hw_i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT) &
- SII164_DETECT_MONITOR_STATE_MASK;
- if (detectReg == SII164_DETECT_MONITOR_STATE_CHANGE)
+ detect_reg = sm750_hw_i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT) &
+ SII164_DETECT_MONITOR_STATE_MASK;
+ if (detect_reg == SII164_DETECT_MONITOR_STATE_CHANGE)
return 1;
else
return 0;
@@ -380,12 +380,12 @@ unsigned char sii164_check_interrupt(void)
*/
void sii164_clear_interrupt(void)
{
- unsigned char detectReg;
+ unsigned char detect_reg;
/* Clear the MDI interrupt */
- detectReg = sm750_hw_i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT);
+ detect_reg = sm750_hw_i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT);
sm750_hw_i2c_write_reg(SII164_I2C_ADDRESS, SII164_DETECT,
- detectReg | SII164_DETECT_MONITOR_STATE_CLEAR);
+ detect_reg | SII164_DETECT_MONITOR_STATE_CLEAR);
}
#endif
--
2.45.2
next prev parent reply other threads:[~2025-04-17 19:13 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20250417190302.13811-1-rubenru09.ref@aol.com>
2025-04-17 19:02 ` [PATCH 0/8] staging: sm750fb: cleanup ddk750_sii164 Ruben Wauters
2025-04-17 19:02 ` [PATCH 1/8] staging: sm250fb: remove USE_HW_I2C check Ruben Wauters
2025-04-18 10:33 ` Greg Kroah-Hartman
2025-04-18 11:42 ` Ruben Wauters
2025-04-17 19:02 ` [PATCH 2/8] staging: sm750fb: rename gDviCtrlChipName Ruben Wauters
2025-04-18 10:36 ` Greg Kroah-Hartman
2025-04-18 11:45 ` Ruben Wauters
2025-04-18 12:09 ` Greg Kroah-Hartman
2025-04-17 19:02 ` [PATCH 3/8] staging: sm750fb: rename vendorID to vendor_id Ruben Wauters
2025-04-18 10:37 ` Greg Kroah-Hartman
2025-04-17 19:02 ` [PATCH 4/8] staging: sm750fb: rename sii164_init_chip params Ruben Wauters
2025-04-17 19:02 ` [PATCH 5/8] staging: sm750fb: rename sii164_set_power's param Ruben Wauters
2025-04-18 10:34 ` Greg Kroah-Hartman
2025-04-17 19:02 ` [PATCH 6/8] staging: sm750fb: rename sii164SelectHotPlugDetectionMode Ruben Wauters
2025-04-17 19:02 ` Ruben Wauters [this message]
2025-04-17 19:02 ` [PATCH 8/8] staging: sm750fb: rename hotPlugValue to hot_plug_value Ruben Wauters
2025-04-18 10:38 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250417190302.13811-8-rubenru09@aol.com \
--to=rubenru09@aol.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=sudip.mukherjee@codethink.co.uk \
--cc=sudipm.mukherjee@gmail.com \
--cc=teddy.wang@siliconmotion.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox