From: lukagejak5@gmail.com
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
Luka Gejak <luka.gejak@linux.dev>
Subject: [PATCH v2 02/26] staging: rtl8723bs: rename u1bTmp to val
Date: Fri, 6 Feb 2026 08:54:15 +0100 [thread overview]
Message-ID: <20260206075439.103287-3-luka.gejak@linux.dev> (raw)
In-Reply-To: <20260206075439.103287-1-luka.gejak@linux.dev>
From: Luka Gejak <luka.gejak@linux.dev>
Rename the variable u1bTmp to val to remove Hungarian notation. This
improves readability and aligns the code with kernel naming standards.
Signed-off-by: Luka Gejak <luka.gejak@linux.dev>
---
.../staging/rtl8723bs/hal/rtl8723b_hal_init.c | 12 +++----
drivers/staging/rtl8723bs/hal/sdio_halinit.c | 32 +++++++++----------
2 files changed, 22 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c b/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
index 054e2c2eab02..b2803b33a0f0 100644
--- a/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
+++ b/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
@@ -259,7 +259,7 @@ static s32 _FWFreeToGo(struct adapter *adapter, u32 min_cnt, u32 timeout_ms)
void rtl8723b_FirmwareSelfReset(struct adapter *padapter)
{
struct hal_com_data *pHalData = GET_HAL_DATA(padapter);
- u8 u1bTmp;
+ u8 val;
u8 Delay = 100;
if (
@@ -268,19 +268,19 @@ void rtl8723b_FirmwareSelfReset(struct adapter *padapter)
/* 0x1cf = 0x20. Inform 8051 to reset. 2009.12.25. tynli_test */
rtw_write8(padapter, REG_HMETFR+3, 0x20);
- u1bTmp = rtw_read8(padapter, REG_SYS_FUNC_EN+1);
- while (u1bTmp & BIT2) {
+ val = rtw_read8(padapter, REG_SYS_FUNC_EN+1);
+ while (val & BIT2) {
Delay--;
if (Delay == 0)
break;
udelay(50);
- u1bTmp = rtw_read8(padapter, REG_SYS_FUNC_EN+1);
+ val = rtw_read8(padapter, REG_SYS_FUNC_EN+1);
}
if (Delay == 0) {
/* force firmware reset */
- u1bTmp = rtw_read8(padapter, REG_SYS_FUNC_EN+1);
- rtw_write8(padapter, REG_SYS_FUNC_EN+1, u1bTmp&(~BIT2));
+ val = rtw_read8(padapter, REG_SYS_FUNC_EN+1);
+ rtw_write8(padapter, REG_SYS_FUNC_EN+1, val&(~BIT2));
}
}
}
diff --git a/drivers/staging/rtl8723bs/hal/sdio_halinit.c b/drivers/staging/rtl8723bs/hal/sdio_halinit.c
index 4e81ef53dc47..c774a9009e95 100644
--- a/drivers/staging/rtl8723bs/hal/sdio_halinit.c
+++ b/drivers/staging/rtl8723bs/hal/sdio_halinit.c
@@ -589,7 +589,7 @@ u32 rtl8723bs_hal_init(struct adapter *padapter)
struct hal_com_data *pHalData;
struct pwrctrl_priv *pwrctrlpriv;
u32 NavUpper = WiFiNavUpperUs;
- u8 u1bTmp;
+ u8 val;
pHalData = GET_HAL_DATA(padapter);
pwrctrlpriv = adapter_to_pwrctl(padapter);
@@ -780,9 +780,9 @@ u32 rtl8723bs_hal_init(struct adapter *padapter)
pHalData->SdioTxOQTMaxFreeSpace = pHalData->SdioTxOQTFreeSpace;
/* Enable MACTXEN/MACRXEN block */
- u1bTmp = rtw_read8(padapter, REG_CR);
- u1bTmp |= (MACTXEN | MACRXEN);
- rtw_write8(padapter, REG_CR, u1bTmp);
+ val = rtw_read8(padapter, REG_CR);
+ val |= (MACTXEN | MACRXEN);
+ rtw_write8(padapter, REG_CR, val);
rtw_hal_set_hwreg(padapter, HW_VAR_NAV_UPPER, (u8 *)&NavUpper);
@@ -848,7 +848,7 @@ u32 rtl8723bs_hal_init(struct adapter *padapter)
/* */
static void CardDisableRTL8723BSdio(struct adapter *padapter)
{
- u8 u1bTmp;
+ u8 val;
u8 bMacPwrCtrlOn;
/* Run LPS WL RFOFF flow */
@@ -856,26 +856,26 @@ static void CardDisableRTL8723BSdio(struct adapter *padapter)
/* ==== Reset digital sequence ====== */
- u1bTmp = rtw_read8(padapter, REG_MCUFWDL);
- if ((u1bTmp & RAM_DL_SEL) && padapter->bFWReady) /* 8051 RAM code */
+ val = rtw_read8(padapter, REG_MCUFWDL);
+ if ((val & RAM_DL_SEL) && padapter->bFWReady) /* 8051 RAM code */
rtl8723b_FirmwareSelfReset(padapter);
/* Reset MCU 0x2[10]= 0. Suggested by Filen. 2011.01.26. by tynli. */
- u1bTmp = rtw_read8(padapter, REG_SYS_FUNC_EN + 1);
- u1bTmp &= ~BIT(2); /* 0x2[10], FEN_CPUEN */
- rtw_write8(padapter, REG_SYS_FUNC_EN + 1, u1bTmp);
+ val = rtw_read8(padapter, REG_SYS_FUNC_EN + 1);
+ val &= ~BIT(2); /* 0x2[10], FEN_CPUEN */
+ rtw_write8(padapter, REG_SYS_FUNC_EN + 1, val);
/* MCUFWDL 0x80[1:0]= 0 */
/* reset MCU ready status */
rtw_write8(padapter, REG_MCUFWDL, 0);
/* Reset MCU IO Wrapper, added by Roger, 2011.08.30 */
- u1bTmp = rtw_read8(padapter, REG_RSV_CTRL + 1);
- u1bTmp &= ~BIT(0);
- rtw_write8(padapter, REG_RSV_CTRL + 1, u1bTmp);
- u1bTmp = rtw_read8(padapter, REG_RSV_CTRL + 1);
- u1bTmp |= BIT(0);
- rtw_write8(padapter, REG_RSV_CTRL+1, u1bTmp);
+ val = rtw_read8(padapter, REG_RSV_CTRL + 1);
+ val &= ~BIT(0);
+ rtw_write8(padapter, REG_RSV_CTRL + 1, val);
+ val = rtw_read8(padapter, REG_RSV_CTRL + 1);
+ val |= BIT(0);
+ rtw_write8(padapter, REG_RSV_CTRL+1, val);
/* ==== Reset digital sequence end ====== */
--
2.52.0
next prev parent reply other threads:[~2026-02-06 7:55 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-06 7:54 [PATCH v2 00/26] staging: rtl8723bs: refactor and fix various driver issues lukagejak5
2026-02-06 7:54 ` [PATCH v2 01/26] staging: rtl8723bs: fix potential out-of-bounds read in rtw_restruct_wmm_ie lukagejak5
2026-02-07 13:45 ` Greg Kroah-Hartman
2026-02-06 7:54 ` lukagejak5 [this message]
2026-02-06 7:54 ` [PATCH v2 03/26] staging: rtl8723bs: fix spacing around operators lukagejak5
2026-02-06 7:54 ` [PATCH v2 04/26] staging: rtl8723bs: modernize hex output in rtw_report_sec_ie lukagejak5
2026-02-06 7:54 ` [PATCH v2 05/26] staging: rtl8723bs: remove dead debugging code in rtw_mlme_ext.c lukagejak5
2026-02-06 7:54 ` [PATCH v2 06/26] staging: rtl8723bs: remove unused rtl8192c function declarations lukagejak5
2026-02-06 7:54 ` [PATCH v2 07/26] staging: rtl8723bs: remove unused RECV_BLK defines lukagejak5
2026-02-06 7:54 ` [PATCH v2 08/26] staging: rtl8723bs: remove unused MAX_PATH_NUM defines lukagejak5
2026-02-06 7:54 ` [PATCH v2 09/26] staging: rtl8723bs: convert PSTA_INFO_T to struct sta_info * lukagejak5
2026-02-06 7:54 ` [PATCH v2 10/26] staging: rtl8723bs: remove NDIS type aliases lukagejak5
2026-02-06 7:54 ` [PATCH v2 11/26] staging: rtl8723bs: remove redundant MAC_ARG macro lukagejak5
2026-02-06 7:54 ` [PATCH v2 12/26] staging: rtl8723bs: core: fix line lengths in rtw_wlan_util.c lukagejak5
2026-02-06 7:54 ` [PATCH v2 13/26] staging: rtl8723bs: core: fix line lengths in rtw_recv.c lukagejak5
2026-02-06 7:54 ` [PATCH v2 14/26] staging: rtl8723bs: hal: fix line lengths in HalPhyRf_8723B.c lukagejak5
2026-02-06 7:54 ` [PATCH v2 15/26] staging: rtl8723bs: os_dep: fix line lengths in ioctl_cfg80211.c lukagejak5
2026-02-06 7:54 ` [PATCH v2 16/26] staging: rtl8723bs: hal: fix line lengths in rtl8723b_cmd.c lukagejak5
2026-02-06 7:54 ` [PATCH v2 17/26] staging: rtl8723bs: hal: fix line lengths in rtl8723b_hal_init.c lukagejak5
2026-02-06 7:54 ` [PATCH v2 18/26] staging: rtl8723bs: hal: fix line lengths in rtl8723b_phycfg.c lukagejak5
2026-02-06 7:54 ` [PATCH v2 19/26] staging: rtl8723bs: core: fix various line length overflows lukagejak5
2026-02-06 7:54 ` [PATCH v2 20/26] staging: rtl8723bs: hal: " lukagejak5
2026-02-06 7:54 ` [PATCH v2 21/26] staging: rtl8723bs: os_dep: " lukagejak5
2026-02-06 7:54 ` [PATCH v2 22/26] staging: rtl8723bs: core: fix line lengths in rtw_cmd.c lukagejak5
2026-02-06 7:54 ` [PATCH v2 23/26] staging: rtl8723bs: core: fix line lengths in rtw_mlme_ext.c lukagejak5
2026-02-06 7:54 ` [PATCH v2 24/26] staging: rtl8723bs: core: fix line lengths in rtw_mlme.c lukagejak5
2026-02-06 7:54 ` [PATCH v2 25/26] staging: rtl8723bs: core: fix line lengths in rtw_xmit.c lukagejak5
2026-02-06 7:54 ` [PATCH v2 26/26] staging: rtl8723bs: core: fix various line length overflows lukagejak5
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260206075439.103287-3-luka.gejak@linux.dev \
--to=lukagejak5@gmail.com \
--cc=dan.carpenter@linaro.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=luka.gejak@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox