* [PATCH v5 1/2] staging: sm750fb: remove debug and diagnostic prints
2026-02-23 20:40 [PATCH v5 0/2] staging: sm750fb: clean up logging Artem Lytkin
@ 2026-02-23 20:40 ` Artem Lytkin
2026-02-23 20:40 ` [PATCH v5 2/2] staging: sm750fb: convert logging to device-based in sm750_hw.c Artem Lytkin
1 sibling, 0 replies; 3+ messages in thread
From: Artem Lytkin @ 2026-02-23 20:40 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Sudip Mukherjee, Teddy Wang, linux-staging, linux-kernel,
Artem Lytkin
Remove all pr_info, pr_debug, and pr_warn calls that dump internal
variable values, pointer addresses, and structure contents not useful
for production use. This includes the complete fb_find_mode() result
logging in lynxfb_set_fbinfo(), the CH7301 DVI chip status messages
in hw_sm750_inithw(), and various debug prints throughout the driver.
Signed-off-by: Artem Lytkin <iprintercanon@gmail.com>
---
drivers/staging/sm750fb/sm750.c | 76 +-----------------------------
drivers/staging/sm750fb/sm750_hw.c | 18 +------
2 files changed, 3 insertions(+), 91 deletions(-)
diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c
index 5c8f2ea784b2..0670b1b0881c 100644
--- a/drivers/staging/sm750fb/sm750.c
+++ b/drivers/staging/sm750fb/sm750.c
@@ -375,7 +375,6 @@ static int lynxfb_ops_set_par(struct fb_info *info)
line_length = var->xres_virtual * var->bits_per_pixel / 8;
line_length = ALIGN(line_length, crtc->line_pad);
fix->line_length = line_length;
- pr_info("fix->line_length = %d\n", fix->line_length);
/*
* var->red,green,blue,transp are need to be set by driver
@@ -486,11 +485,6 @@ static int lynxfb_ops_check_var(struct fb_var_screeninfo *var,
par = info->par;
crtc = &par->crtc;
- pr_debug("check var:%dx%d-%d\n",
- var->xres,
- var->yres,
- var->bits_per_pixel);
-
ret = lynxfb_set_color_offsets(info);
if (ret) {
@@ -582,7 +576,6 @@ static int lynxfb_ops_blank(int blank, struct fb_info *info)
struct lynxfb_par *par;
struct lynxfb_output *output;
- pr_debug("blank = %d.\n", blank);
par = info->par;
output = &par->output;
sm750_dev = par->dev;
@@ -627,7 +620,6 @@ static int sm750fb_set_drv(struct lynxfb_par *par)
crtc->channel = sm750_primary;
crtc->o_screen = 0;
crtc->v_screen = sm750_dev->pvMem;
- pr_info("use simul primary mode\n");
break;
case sm750_simul_sec:
output->paths = sm750_pnc;
@@ -736,12 +728,6 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
lynx750_ext, NULL, vesa_modes,
};
int cdb[] = {ARRAY_SIZE(lynx750_ext), 0, VESA_MODEDB_SIZE};
- static const char * const mdb_desc[] = {
- "driver prepared modes",
- "kernel prepared default modedb",
- "kernel HELPERS prepared vesa_modes",
- };
-
static const char *fix_id[2] = {
"sm750_fb1", "sm750_fb2",
};
@@ -769,7 +755,6 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
crtc->cursor.mmio = sm750_dev->pvReg +
0x800f0 + (int)crtc->channel * 0x140;
- pr_info("crtc->cursor.mmio = %p\n", crtc->cursor.mmio);
crtc->cursor.max_h = 64;
crtc->cursor.max_w = 64;
crtc->cursor.size = crtc->cursor.max_h * crtc->cursor.max_w * 2 / 8;
@@ -803,47 +788,10 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
ret = fb_find_mode(var, info, g_fbmode[index],
pdb[i], cdb[i], NULL, 8);
- if (ret == 1) {
- pr_info("success! use specified mode:%s in %s\n",
- g_fbmode[index],
- mdb_desc[i]);
+ if (ret == 1 || ret == 2)
break;
- } else if (ret == 2) {
- pr_warn("use specified mode:%s in %s,with an ignored refresh rate\n",
- g_fbmode[index],
- mdb_desc[i]);
- break;
- } else if (ret == 3) {
- pr_warn("wanna use default mode\n");
- /*break;*/
- } else if (ret == 4) {
- pr_warn("fall back to any valid mode\n");
- } else {
- pr_warn("ret = %d,fb_find_mode failed,with %s\n",
- ret,
- mdb_desc[i]);
- }
}
- /* some member of info->var had been set by fb_find_mode */
-
- pr_info("Member of info->var is :\n"
- "xres=%d\n"
- "yres=%d\n"
- "xres_virtual=%d\n"
- "yres_virtual=%d\n"
- "xoffset=%d\n"
- "yoffset=%d\n"
- "bits_per_pixel=%d\n"
- " ...\n",
- var->xres,
- var->yres,
- var->xres_virtual,
- var->yres_virtual,
- var->xoffset,
- var->yoffset,
- var->bits_per_pixel);
-
/* set par */
par->info = info;
@@ -853,7 +801,6 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
info->pseudo_palette = &par->pseudo_palette[0];
info->screen_base = crtc->v_screen;
- pr_debug("screen_base vaddr = %p\n", info->screen_base);
info->screen_size = line_length * var->yres_virtual;
/* set info->fix */
@@ -867,7 +814,6 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
strscpy(fix->id, fix_id[index], sizeof(fix->id));
fix->smem_start = crtc->o_screen + sm750_dev->vidmem_start;
- pr_info("fix->smem_start = %lx\n", fix->smem_start);
/*
* according to mmap experiment from user space application,
* fix->mmio_len should not larger than virtual size
@@ -876,13 +822,10 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
* data into the bound over virtual size
*/
fix->smem_len = crtc->vidmem_size;
- pr_info("fix->smem_len = %x\n", fix->smem_len);
info->screen_size = fix->smem_len;
fix->line_length = line_length;
fix->mmio_start = sm750_dev->vidreg_start;
- pr_info("fix->mmio_start = %lx\n", fix->mmio_start);
fix->mmio_len = sm750_dev->vidreg_size;
- pr_info("fix->mmio_len = %x\n", fix->mmio_len);
lynxfb_set_visual_mode(info);
@@ -891,22 +834,12 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
var->accel_flags = 0;
var->vmode = FB_VMODE_NONINTERLACED;
- pr_debug("#1 show info->cmap :\nstart=%d,len=%d,red=%p,green=%p,blue=%p,transp=%p\n",
- info->cmap.start, info->cmap.len,
- info->cmap.red, info->cmap.green, info->cmap.blue,
- info->cmap.transp);
-
ret = fb_alloc_cmap(&info->cmap, 256, 0);
if (ret < 0) {
dev_err(info->device, "Could not allocate memory for cmap.\n");
goto exit;
}
- pr_debug("#2 show info->cmap :\nstart=%d,len=%d,red=%p,green=%p,blue=%p,transp=%p\n",
- info->cmap.start, info->cmap.len,
- info->cmap.red, info->cmap.green, info->cmap.blue,
- info->cmap.transp);
-
exit:
lynxfb_ops_check_var(var, info);
return ret;
@@ -1133,12 +1066,8 @@ static int __init lynxfb_setup(char *options)
int len;
char *opt, *tmp;
- if (!options || !*options) {
- pr_warn("no options.\n");
+ if (!options || !*options)
return 0;
- }
-
- pr_info("options:%s\n", options);
len = strlen(options) + 1;
g_settings = kzalloc(len, GFP_KERNEL);
@@ -1175,7 +1104,6 @@ static int __init lynxfb_setup(char *options)
}
/* misc g_settings are transport to chip specific routines */
- pr_info("parameter left for chip specific analysis:%s\n", g_settings);
return 0;
}
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index a29faee91c78..a5c2dbca00ec 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -34,8 +34,6 @@ int hw_sm750_map(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
sm750_dev->vidreg_start = pci_resource_start(pdev, 1);
sm750_dev->vidreg_size = SZ_2M;
- pr_info("mmio phyAddr = %lx\n", sm750_dev->vidreg_start);
-
/*
* reserve the vidreg space of smi adaptor
* if you do this, you need to add release region code
@@ -56,7 +54,6 @@ int hw_sm750_map(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
ret = -EFAULT;
goto exit;
}
- pr_info("mmio virtual addr = %p\n", sm750_dev->pvReg);
sm750_dev->accel.dpr_base = sm750_dev->pvReg + DE_BASE_ADDR_TYPE1;
sm750_dev->accel.dp_port_base = sm750_dev->pvReg + DE_PORT_ADDR_TYPE1;
@@ -72,8 +69,6 @@ int hw_sm750_map(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
* @ddk750_get_vm_size function can be safe.
*/
sm750_dev->vidmem_size = ddk750_get_vm_size();
- pr_info("video memory phyAddr = %lx, size = %u bytes\n",
- sm750_dev->vidmem_start, sm750_dev->vidmem_size);
/* reserve the vidmem space of smi adaptor */
sm750_dev->pvMem =
@@ -84,7 +79,6 @@ int hw_sm750_map(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
ret = -EFAULT;
goto exit;
}
- pr_info("video memory vaddr = %p\n", sm750_dev->pvMem);
exit:
return ret;
}
@@ -163,11 +157,9 @@ int hw_sm750_inithw(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
* The following register values for CH7301 are from
* Chrontel app note and our experiment.
*/
- pr_info("yes,CH7301 DVI chip found\n");
sm750_sw_i2c_write_reg(0xec, 0x1d, 0x16);
sm750_sw_i2c_write_reg(0xec, 0x21, 0x9);
sm750_sw_i2c_write_reg(0xec, 0x49, 0xC0);
- pr_info("okay,CH7301 DVI chip setup done\n");
}
}
@@ -192,14 +184,12 @@ int hw_sm750_output_set_mode(struct lynxfb_output *output,
if (sm750_get_chip_type() != SM750LE) {
if (channel == sm750_primary) {
- pr_info("primary channel\n");
if (output->paths & sm750_panel)
disp_set |= do_LCD1_PRI;
if (output->paths & sm750_crt)
disp_set |= do_CRT_PRI;
} else {
- pr_info("secondary channel\n");
if (output->paths & sm750_panel)
disp_set |= do_LCD1_SEC;
if (output->paths & sm750_crt)
@@ -215,7 +205,6 @@ int hw_sm750_output_set_mode(struct lynxfb_output *output,
poke32(DISPLAY_CONTROL_750LE, reg);
}
- pr_info("ddk setlogicdispout done\n");
return ret;
}
@@ -232,10 +221,8 @@ int hw_sm750_crtc_check_mode(struct lynxfb_crtc *crtc,
case 16:
break;
case 32:
- if (sm750_dev->revid == SM750LE_REVISION_ID) {
- pr_debug("750le do not support 32bpp\n");
+ if (sm750_dev->revid == SM750LE_REVISION_ID)
return -EINVAL;
- }
break;
default:
return -EINVAL;
@@ -302,7 +289,6 @@ int hw_sm750_crtc_set_mode(struct lynxfb_crtc *crtc,
else
clock = SECONDARY_PLL;
- pr_debug("Request pixel clock = %lu\n", modparm.pixel_clock);
ret = ddk750_set_mode_timing(&modparm, clock);
if (ret) {
pr_err("Set mode timing failed\n");
@@ -431,12 +417,10 @@ int hw_sm750_set_blank(struct lynxfb_output *output, int blank)
switch (blank) {
case FB_BLANK_UNBLANK:
- pr_debug("flag = FB_BLANK_UNBLANK\n");
dpms = SYSTEM_CTRL_DPMS_VPHP;
pps = PANEL_DISPLAY_CTRL_DATA;
break;
case FB_BLANK_NORMAL:
- pr_debug("flag = FB_BLANK_NORMAL\n");
dpms = SYSTEM_CTRL_DPMS_VPHP;
crtdb = CRT_DISPLAY_CTRL_BLANK;
break;
--
2.43.0
^ permalink raw reply related [flat|nested] 3+ messages in thread