From: Gabriel Windlin <gawindlin@gmail.com>
To: Sudip Mukherjee <sudipm.mukherjee@gmail.com>,
Teddy Wang <teddy.wang@siliconmotion.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-fbdev@vger.kernel.org, linux-staging@lists.linux.dev,
linux-kernel@vger.kernel.org
Cc: Gabriel Windlin <gawindlin@gmail.com>
Subject: [PATCH 2/8] staging: sm750fb: remove unused CSC register definitions
Date: Wed, 4 Mar 2026 00:24:23 +0100 [thread overview]
Message-ID: <20260303232434.1850583-2-gawindlin@gmail.com> (raw)
In-Reply-To: <20260303232434.1850583-1-gawindlin@gmail.com>
The Color Space Conversion (CSC) register macros defined in ddk750_reg.h
are not referenced anywhere in the driver. Remove them to reduce dead
code as noted in the TODO file.
Signed-off-by: Gabriel Windlin <gawindlin@gmail.com>
---
drivers/staging/sm750fb/ddk750_reg.h | 79 ----------------------------
1 file changed, 79 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_reg.h b/drivers/staging/sm750fb/ddk750_reg.h
index 59ecbc0d48f7..13b04870ad9b 100644
--- a/drivers/staging/sm750fb/ddk750_reg.h
+++ b/drivers/staging/sm750fb/ddk750_reg.h
@@ -1126,85 +1126,6 @@
/* Panel Palette register starts at 0x080C00 ~ 0x080FFC */
#define CRT_PALETTE_RAM 0x080C00
-/* Color Space Conversion registers. */
-
-#define CSC_Y_SOURCE_BASE 0x1000C8
-#define CSC_Y_SOURCE_BASE_EXT BIT(27)
-#define CSC_Y_SOURCE_BASE_CS BIT(26)
-#define CSC_Y_SOURCE_BASE_ADDRESS_MASK 0x3ffffff
-
-#define CSC_CONSTANTS 0x1000CC
-#define CSC_CONSTANTS_Y_MASK (0xff << 24)
-#define CSC_CONSTANTS_R_MASK (0xff << 16)
-#define CSC_CONSTANTS_G_MASK (0xff << 8)
-#define CSC_CONSTANTS_B_MASK 0xff
-
-#define CSC_Y_SOURCE_X 0x1000D0
-#define CSC_Y_SOURCE_X_INTEGER_MASK (0x7ff << 16)
-#define CSC_Y_SOURCE_X_FRACTION_MASK (0x1fff << 3)
-
-#define CSC_Y_SOURCE_Y 0x1000D4
-#define CSC_Y_SOURCE_Y_INTEGER_MASK (0xfff << 16)
-#define CSC_Y_SOURCE_Y_FRACTION_MASK (0x1fff << 3)
-
-#define CSC_U_SOURCE_BASE 0x1000D8
-#define CSC_U_SOURCE_BASE_EXT BIT(27)
-#define CSC_U_SOURCE_BASE_CS BIT(26)
-#define CSC_U_SOURCE_BASE_ADDRESS_MASK 0x3ffffff
-
-#define CSC_V_SOURCE_BASE 0x1000DC
-#define CSC_V_SOURCE_BASE_EXT BIT(27)
-#define CSC_V_SOURCE_BASE_CS BIT(26)
-#define CSC_V_SOURCE_BASE_ADDRESS_MASK 0x3ffffff
-
-#define CSC_SOURCE_DIMENSION 0x1000E0
-#define CSC_SOURCE_DIMENSION_X_MASK (0xffff << 16)
-#define CSC_SOURCE_DIMENSION_Y_MASK 0xffff
-
-#define CSC_SOURCE_PITCH 0x1000E4
-#define CSC_SOURCE_PITCH_Y_MASK (0xffff << 16)
-#define CSC_SOURCE_PITCH_UV_MASK 0xffff
-
-#define CSC_DESTINATION 0x1000E8
-#define CSC_DESTINATION_WRAP BIT(31)
-#define CSC_DESTINATION_X_MASK (0xfff << 16)
-#define CSC_DESTINATION_Y_MASK 0xfff
-
-#define CSC_DESTINATION_DIMENSION 0x1000EC
-#define CSC_DESTINATION_DIMENSION_X_MASK (0xffff << 16)
-#define CSC_DESTINATION_DIMENSION_Y_MASK 0xffff
-
-#define CSC_DESTINATION_PITCH 0x1000F0
-#define CSC_DESTINATION_PITCH_X_MASK (0xffff << 16)
-#define CSC_DESTINATION_PITCH_Y_MASK 0xffff
-
-#define CSC_SCALE_FACTOR 0x1000F4
-#define CSC_SCALE_FACTOR_HORIZONTAL_MASK (0xffff << 16)
-#define CSC_SCALE_FACTOR_VERTICAL_MASK 0xffff
-
-#define CSC_DESTINATION_BASE 0x1000F8
-#define CSC_DESTINATION_BASE_EXT BIT(27)
-#define CSC_DESTINATION_BASE_CS BIT(26)
-#define CSC_DESTINATION_BASE_ADDRESS_MASK 0x3ffffff
-
-#define CSC_CONTROL 0x1000FC
-#define CSC_CONTROL_STATUS BIT(31)
-#define CSC_CONTROL_SOURCE_FORMAT_MASK (0x7 << 28)
-#define CSC_CONTROL_SOURCE_FORMAT_YUV422 (0x0 << 28)
-#define CSC_CONTROL_SOURCE_FORMAT_YUV420I (0x1 << 28)
-#define CSC_CONTROL_SOURCE_FORMAT_YUV420 (0x2 << 28)
-#define CSC_CONTROL_SOURCE_FORMAT_YVU9 (0x3 << 28)
-#define CSC_CONTROL_SOURCE_FORMAT_IYU1 (0x4 << 28)
-#define CSC_CONTROL_SOURCE_FORMAT_IYU2 (0x5 << 28)
-#define CSC_CONTROL_SOURCE_FORMAT_RGB565 (0x6 << 28)
-#define CSC_CONTROL_SOURCE_FORMAT_RGB8888 (0x7 << 28)
-#define CSC_CONTROL_DESTINATION_FORMAT_MASK (0x3 << 26)
-#define CSC_CONTROL_DESTINATION_FORMAT_RGB565 (0x0 << 26)
-#define CSC_CONTROL_DESTINATION_FORMAT_RGB8888 (0x1 << 26)
-#define CSC_CONTROL_HORIZONTAL_FILTER BIT(25)
-#define CSC_CONTROL_VERTICAL_FILTER BIT(24)
-#define CSC_CONTROL_BYTE_ORDER BIT(23)
-
#define DE_DATA_PORT 0x110000
#define I2C_BYTE_COUNT 0x010040
--
2.53.0
next prev parent reply other threads:[~2026-03-03 23:25 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-03 23:24 [PATCH 1/8] staging: sm750fb: remove unused GPIO_MUX bit field definitions Gabriel Windlin
2026-03-03 23:24 ` Gabriel Windlin [this message]
2026-03-03 23:24 ` [PATCH 3/8] staging: sm750fb: remove unused ZV capture register definitions Gabriel Windlin
2026-03-03 23:24 ` [PATCH 4/8] staging: sm750fb: remove unused alpha and cursor " Gabriel Windlin
2026-03-03 23:24 ` [PATCH 5/8] staging: sm750fb: remove unused memory arbitration " Gabriel Windlin
2026-03-03 23:24 ` [PATCH 6/8] staging: sm750fb: remove unused interrupt " Gabriel Windlin
2026-03-03 23:24 ` [PATCH 7/8] staging: sm750fb: remove unused CURRENT_GATE, CRT_HWC, and DMA " Gabriel Windlin
2026-03-04 8:10 ` Dan Carpenter
2026-03-03 23:24 ` [PATCH 8/8] staging: sm750fb: remove unused GPIO bit field and interrupt definitions Gabriel Windlin
2026-03-09 16:39 ` [PATCH 1/8] staging: sm750fb: remove unused GPIO_MUX bit field definitions Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260303232434.1850583-2-gawindlin@gmail.com \
--to=gawindlin@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=sudipm.mukherjee@gmail.com \
--cc=teddy.wang@siliconmotion.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox